RALENO PLV-S300 LED Panel Soft Light User Manual

June 3, 2024
RALENO

RALENO -logo

RALENO PLV S300 LED Panel Soft Light- User Manual
PLV-S300
LED Panel Soft Light

Dear customers,
Thank you for choosing RALENO, we are very happy to meet you here. RALENO is a brand that aims to stand out in the field of photographic equipment and provide truly excellent products to help photographers improve their work. Your recognition of our products and efforts is the greatest glory of RALENO. We are always committed to improving our products and optimizing the user experience. Your unwavering support is the driving force for RALENO to bring better products to the market. If you can recommend our brand to your friends and family, of course we would be very grateful. Thank you again for choosing RALENO. Please note that RALENO products come with a 2-year warranty. You are one of our valued customers, if you have any questions/suggestions, please feel free to contact us.
contact details: support@ralenos.com
We hope to provide you with better services in the future.
Kind regards, RALENO

Safety tips:
In order to prevent any damage to your product and your safety, please read the following safety precautions thoroughly before use, and keep this manual so that you can refer to it at any time if you have any questions about the operation.

Introduction of Product Structure

RALENO PLV S300 LED Panel Soft Light-fig1

  1. Soft light panel
  2. Light fixing knob
  3. Angle adjustment knob
  4. Stand Connector
  5. Cooling holes
  6. Battery removal button
  7. Power supply mode selector switch
  8. Battery compartment
  9. Power DC jack
  10. Battery indicator
  11. Remote control storage/ charging compartment
  12. Power key
  13. Remote control
  • PLV-S300 is a newly designed LED soft light, using 144 3200K and 144 5600K high-brightness 2835 LED lamp beads. Use backlight technology and scientific arrangement to make the illuminated light softer.
  • The brightness can be adjusted arbitrarily between 0-100%, and the color temperature can be adjusted between 3200K-5600K to meet more environmental needs.
  •  The equipped bracket connector allows 90° front and rear adjustment of the soft light to meet your multi-angle use needs.
  • RaLeno’s original 2.4G wireless remote control provides you with more ways to play. You can put the remote behind the soft light or remove it for mobile use, and the remote can be attached to any iron tool.
  • The remote control has an LCD display, which can display the brightness and color temperature in real time.
  • 2.4G wireless remote control distance can be within 30 meters (no obstacles in the middle).
  • A 4-segment LED indicator on the back of the soft light helps to remind battery level.
  • You can use two Sony NP-F series lithium batteries (not included) for power, or use an adapter for power.

Safety Warning

  1. To prevent the risk of fire or electric shock, do not expose this soft light to rain or moisture.
  2. The use of non-original matching chargers or batteries other than those specified may cause damage to the light or fail to start the light. Please ensure that the voltage used meets the requirements.
  3. When you find that the soft light emits smoke or smells, please cut off the power immediately and stop using it. And please do not hesitate to contact RALENO’s after-sales team support@ralenos.com , we will help you solve your problem within 24 hours.
  4. Do not disassemble the soft light by yourself, touching the internal parts of the light may cause injury. In case of light failure, or when the light is damaged due to falling or other accidents, please stop using it and contact RALENO’s after-sales team, we will solve the problem for you within 24 hours.
  5. In the process of storage and transportation, please separate the soft light from the battery, so as not to accidentally touch the switch, which will cause the device to be used for a long time without supervision and cause a fire.
  6. Do not keep this light within the reach of children. Please follow this precaution or injury may result.
  7. Please read the relevant precautions in advance when choosing batteries. Improper operation may cause the battery to leak or burst. Therefore, when using battery power, please pay attention to the following:
    • The soft light only supports the use of Sony NP-F series batteries. NP-1960/F970 is recommended.
    • Do not short-circuit or disassemble the battery.
    • Before replacing the battery, make sure that the power is tumed off.
    • Do not throw the battery into a fire or heat it up.
    • Never immerse the battery in water.

Notes on Cleaning

Please use a dry soft cloth to clean the fill light. You can use a cloth lightly dampened with some mild detergent to remove hard-to-remove dirt. Then dry it with a soft cloth. Do not use harsh cleaning agents such as thinner, gasoline or alcohol, as these solvents can damage the protective coating on the surface.

Preparation and Installation

  1. Product installation
    1.1 Take out the soft light and the bracket connector, align the thread of the bracket connector with the fixing hole of the soft light, and turn the fixing knob clockwise to fix the soft light on the connector.
    RALENO PLV S300 LED Panel Soft Light-fig2 1.2 Then turn the bottom knob counterclockwise, align the interface to connect the tripod, and tighten the bracket fixing knob. (Note: This product does not come with a tripod).

  2. Angle adjustment
    2.1 Turn the angle adjustment knob counterclockwise until the soft light can rotate back and forth normally.
    2.2 Adjust the soft light to the desired angle. Then tighten it clockwise.

Product Operation

  1. Turn on
    1.1 Battery powered
    Insert two Sony NP-F series batteries into the battery compartment of the product correctly, then press the left power mode button up toward the battery icon (No. 7 on page 2), and finally press the upper power button for about 1 second and the light will be turned on. (No. 12 on page 2)
    1.2 DC power
    Insert the DC end of the adapter to the product. Press the power mode button down in the direction of the DC icon (NO. 7 on page 2), finally press the upper power button for about 1 second to turn it on. (NO. 12 on page 2) (Note: The initial default power button is DC power)

  2. Turn off
    Short press the “0” power key once to turn it on, and press it again to turn it off.

  3. Power display
    When the product is turned on, the 4-segment LED indicator on the back of the soft light will display the current battery information.

The Remote Control Function Introduction

  1. Introduction to the structure of the remote control

RALENO PLV S300 LED Panel Soft Light-fig4

  1. Group instruction
  2. 2.4G channel indication
  3. Battery indicator
  4. Color temperature indication
  5. Brightness indication
  6. Group adjustment button
  7. 2.4G channel setting button
  8. ON/ OFF button
  9. Color temperature/ 2.4G channel adjustment rotary button
  10. Reset
  11. Brightness adjustment rotary button
  12. Type-C charging port
  13. Data communication/ Charging compartment

2.The remote control and soft light match
2.1 Put the remote control into the charging compartment, press and hold the soft light power key “0” for about 1 second to turn on the light.
2.2 The remote control will read the current setting parameter of the light and match automatically. (Note: if the remote control cannot control the light, put the remote control into the charging compartment, and the remote control will read the current setting information of the light and match automatically)

3.Group and channel adjustment
3.1 Put the remote control into the charging compartment of the soft light.
3.2 Short press the “CH” button on the remote control once, the display “CHxx” flashes, then rotate the “CCT” button to adjust the 2.4G channel, and then short press the “CH” button to save the setting. Or if there is no operation after 5 seconds, it will automatically save current settings and exit setting mode.
3.3 Short press “GR” key to select A, B, C group.
(Note: When the remote control is removed from the light, the remote control needs to be consistent with the light channel/group to control the light wirelessly)
4.Soft light on and off controls
When the remote control shows “OFF”, press the “0” button on the remote control to turn on the soft light. When not in use, press the “0” button again to turn it off. 5.Brightness and color temperature adjustment
After the remote control is turned on normally, rotate the “CCT” button to adjust the color temperature of the light, and rotate the “DIM” button to adjust the brightness. 6.Custom settings for the remote control screen backlight
Press and hold the “CH” and “GR” buttons on the remote control simulta-neously for about 5 seconds, the LCD displays “BL” to enter the custom setting mode. Rotate the “DIM” button to set according to your needs, and the parameters will be automatically saved in about one second after setting. Short press the “0” button once to exit the custom mode.

RALENO PLV S300 LED Panel Soft Light-fig6

BL 10 “Screen backlight automatically dims after 10 seconds of light on”
BL ON “Screen backlight is always on”
BL OFF “Screen backlight never lights up”
7.Charging of the remote control
7.1 When the soft light is turned on, the remote control will be automati- cally charged when placed in the charging compartment;
7.2 The remote control has a typeC connection port, you can also connect the power supply for charging.
8. Standby mode
When using the remote control to turn off the light, the screen displays “OFF” and the light is in standby. In order to save power, if the light does not work for 2 hours, the light will automatically turn off the power. When you use light again, you need to press the “0” power button on the light to restart the light.
9.Reset
9.1 Turn on the power switch of the soft light.
9.2 Put the remote control into the charging compartment of the light, and short press the “reset” hole of the remote control.
If you do not use the remote control for a long time, you can press the power button of the remote control for 5 seconds to turn off the remote control screen display.

Precautions

  1. This soft light is not dust-proof or waterproof.
  2. This soft light is a precision instrument, please do not let the soft light fall, be collided or strongly impacted.
  3. Do not block the ventilation holes, otherwise it may increase the internal temperature and cause fire or accident.
  4. Do not place this soft light near flammable or easy-to-play solvents, otherwise it may cause fire or produce smoke.
  5. Please remember to turn off the power after using the soft light.
  6. Remove the battery when the soft light is not in use or after use.
  7. Do not put the light in the storage box immediately after use, the white LED may be damaged due to residual heat. Please let the light cool down enough before placing it in the box.

 Product Dimensions

Unit: mm Tolerance: ±1.0mm
Soft Light: L=376mm W=266mm H= 43.2mm
The remote control: L=57.6mm W=101mm H=23.6mm

RALENO PLV S300 LED Panel Soft Light-fig7

Product Specifications

Power
Options| Battery| Two SONY NP-F series lithium batteries (not included)
---|---|---
Adapter| DC 15V 3A(MAX)
Number of LEDs| 5600K cool color 144 Pcs,3200K warm color 144 Pcs
Input Voltage| 15V
Maximum Power| 45W
Maximum illuminance| 1400LUX/1M, 4800LUX/0.5M
Display Content| Brightness, color temperature, group, channel, battery level
Color Temperature Range| 3200K-5600K ± 200K
Color Rendering Index| CRI397
Control Method| Encoder adjustment Brightness (0-100% minimum adjustment range 1%) Color temperature (3200K-5600K, the minimum adjustment range is 100K) 2.4G wireless remote control
The Remote Control| Display mode| LCD display
Remote control type| 2.4G wireless communication
Remote control distance| 30 meters radius aroundthe light (barrier-free)
Remote control channel| 3 groups/40 channels
Power supply| 3.7V/250mAh
Product Weight| 1240g
Working Temperature| 0°C-40°C
Storage Temperature| -10°C–50°C
Relative Humidity| 20%-90%
Product Size| 376 X 266 X 43.2 mm

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener-ates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure require-ment. The device can be used inportable exposure condition without restriction.

RALENO -logoShenzhen Apeman Innovations Technology Co., Ltd.
Room 126, Building11, Huanan Avenue No.1 Huanan City
International Printing paper packaging, China
www.ralenos.com | support@ralenos.com
RALENO -icon

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals