RALENO PLV-S300 45W LED Video Light User Guide
- June 14, 2024
- RALENO
Table of Contents
PLV-S300 45W LED Video Light
Soft Light User Guide
USING THE QUICK GUIDE
-
Put in the remote, connect the power supply, plug in the OC power supply or battery.
-
Select the power supply mode — A: DC B: BATTERY Corresponding power toggle button.
-
Press the POWER button of the light for about 1 second to tum on the device. After the light is on, you can use the remote controt to set the required paramenters.
-
When the light is tumed off by remote within 2 hours, you can still use the remote to turn it on and set parameters, but if it exceeds 2 hours, you need to press the POWER button on the back of the light to turn it on. {After 2 hours, press the remote control key cannot tum on the light. We design this way to save energy and protect the environment.)
NOTE
- When the remote cannot control the light, please put the remote into the charging compartment, and the remote will automatically synchronize the channel, group and related settings of the light. After about 3 seconds, it can be taken out for normal use.
- If there is no response to pressing any button on the remote, please use a card pin to insert the reset hole of the remote, and press for about one second. After the remote is reset, it can be used normally.