RALENO PLV-S192 LED Video Light User Manual
- June 17, 2024
- RALENO
Table of Contents
RALENO PLV-S192 LED Video Light
Safety tips:
In order to ensure your safety and prevent any damage to the product, please
read the manuals carefully before operating and keep it for reference at any
time.
Product structure is introduced
- Outer frame
- Light plate
- Bracket knob
- Camera fixed knob
- Angle adjustment knob
- Cooling hole
- LCD display
- Brightness adjusting knob
- Colour temperature adjustment knob
- Power switch
- DC charging mouth
Characteristic
- PLV-S192 is an ultra-thin and newly designed video light. It is equipped with 96PCS 3200K warm light beads and 96PCS 5600K cold light beads
- Brightness can be adjusted between 0-100%, and colour temperature can be adjusted between 3200K- 5600K to meet more environmental requirements.
- PLV-S192 is equipped with cold shoes so it is more convenient to adjust the light for your preference back and forth each 90°.
- An LCD screen can intuitively show the current brightness, colour and battery information.
- Built-in 29.6W/h polymer batteries can provide 1.5 hours of continuous lighting and charging can be completed in 2 hours.
warning
To prevent the risk of fire or electric shock, don’t let the device be exposed
to rain or moisture.
- Use of a non-original battery may cause damage or not start the source, please pay attention to the use of voltage.
- When you find the product emits smoke or a strange odour, please disconnect the power immediately. If continued to use would further damage the equipment or cause personal injury.
- Please don’t disassemble the product by yourself if the equipment falls or is broken by other accidents. If have any problem please feel free to contact us at any time via [email protected]. We are always be here for you.
- Keep out of reach of children, please observe this caution or it may cause injury.
Cleaning notes
- Clean the dirt in the video light with detergent and make it dry with a soft cloth.
- Don’t use strong detergents, such as thinner; gasoline and alcohol, which could damage the protective layer.
Product installation and use
Cold shoe installation
- Take out the video light and cold shoe. Align the cold shoe with the fixing hole of the video light, turn it clockwise to fix the video light.
- Insert the slide rail under the cold shoe directly into the camera and secure it. If using a stand, align the stand and turn the cold shoe counterclockwise until it is seated.
Angle adjustment
- Twist angle adjusting knob and rotate back and forth 180 degrees.
- The video light to the required Angle adjustment.
- Tighten the Angle by adjusting the knob clockwise.
Charging
- Plug the 15V2A charger that matches the video light into the power socket.
- Inserting the charger into the charging mouth. At this time on the LCD screen, the battery will be flashing.
- When the battery icon on the LCD screen stops flashing, the charging is complete.
Function and display
-
Switch machine
The power ON/OFF switch of the video light toggles to the ON side, video light is turned ON. The power ON/OFF switch of the light toggles to the OFF side, video light is turned OFF. -
LCD screen
After turning it on, the LCD screen will be lit, which will display brightness, colour temperature and battery information.
Brightness adjusting knob
- After turning on, rotating the brightness adjustment knob clockwise, brightness will be increased by 1%, and the maximum is 100%.
- On the contrary, brightness will be declined by 1 %, and the minimum is 0.
Colour temperature adjustment knob
- After turning it on, Rotating the colour temperature adjustment knob clockwise, the colour temperature will be increased to looking, and the maximum is 5600K.
- On the contrary, the colour temperature will be decreased by 100K, and the minimum is 3200K.
Product dimensions
- Unit: mm Tolerances: ±1.0mm L=268 W=26 H=l88
Technical parameter
Serial
number
| Project| Specification
---|---|---
01| Number of LEDs| 192PCS
02| Maximum power| 19.5W
03| Maximum illuminance| 650LUX/IM
04| Colour temperature
range
| 3200K-5600K (Built-in adjustable)
05| Color Rendering Index| CRl>97
06| Display usage| LCD screen
07| According to the content| Brightness levels, color temperature, battery
08| Control mode| Two-position toggle power switch/ Potentiometer adjustment
09| Dimming range| 0-100%
10| Power supply mode| Built-in 29.6 W/h polymer batteries
11| Built-in batteries
speci fi cations
| 3.7V 4000mAh’2 series connection
12| Charger
spec i fication
| DC15V2A
13| Continuous
light time
| About 1.5 hours
14| Charging Time| About 2 hours
15| Co n nectors| DC charging port (Inside positive
and outer negative electrodes
16| Net weight| 580g
17| Working environment temperature| 0°C~40°C
18| storage
temperature
| -10°C~S0°C
---|---|---
19| Re l ative
humidity
| 20%~90%
20| Product size| 268mm x 26mm x 188 mm
NOTE
- The video light is not dustproof and waterproof.
- The video light belongs to make lambency lamp fell t precision instruments, please do not o the ground, collision or a strong shock.
- The working temperature of the video light is O”C~40″ C.
- Please do not cover vents, otherwise may make the internal temperature rise and cause a fire or accident, which may cause an accident in the video light.
- Please do not long time look straight into the shiny surface of the video light, otherwise may be visually impaired.
- Do not place the video light near combustible solvent, otherwise may cause fire or smoke.
- Be sure to switch off the visit. deo lighting kit when you are not using to the storage box immediately after damaging the video light.
- Do not put the video light I use. The residual heat may
CONTACT
- Shenzhen Apeman Innovations Technology Co., Ltd. Room 126, Building, Huanan Avenue No.1 Huanan City International Printing paper packaging, China
- www.ralenos.com
- [email protected]
- contact details: [email protected]
- We hope to provide you with better services in the future. Kind regards, RALENO