RALENO TP-40 60 Inch Tripod for Camera User Manual

June 15, 2024
RALENO

RALENO TP-40 60 Inch Tripod for Camera

RALENO TP-40 60 Inch Tripod for Camera

Important Safety Instructions

  1. Make sure that all levels, handles, knobs and leg locks are correctly tightened and that all three legs are fully opened before use.
  2. Do not carry or transport the tripod with camera equipment attached (for example: over your shoulder or cradled in your arms).
  3. Do not store or expose your tripod to excessive heat or cold, or use near any flame or fire.
  4. Do not OIL or GREASE any part of the tripod.
  5. Do not use any solvents or thinner to clean your tripod . Use only a mild detergent and wipe dry with a soft, lint-free cloth only.
  6. Do not exceed the load limit of this product.

Specifications

  • Maximum Height: 60″ (1.5m)
  • Minimum Height: 18.9″ (0.48m)
  • Folded Length: 20″ (0.51m)
  • Weight: 2.64lbs (1.2kg)
  • Tripod Section number: 4 knots
  • Accessories: Mobile phone holder, Portable bag

Tripod Components

  1. Quick-installed panel
    Quick disassembly for easy camera and lens replacement

  2. Fixed knob at the top
    Lock the tripod head to ensure that the top of the camera does not shake

  3. Horizontal bubble
    Calibrate whether the top camera is horizontal

  4. Tilt and lock button
    Adjust the front and rear angle of the tripod head

  5. Horizontal bubble
    Calibrate the tripod is horizontal

  6. Center shaft rising lock knob
    When the center shaft rises to a fixed height, tighten the knob to fix the center shaft.

  7. Rocker for lifting the center axle
    Determine the rising height of the center shaft by the joystick

  8. Aluminum alloy foot tube
    The shelves are all treated by extreme oxidation spray without scratches

  9. Locking knob
    Locks the center column in place

  10. Support arm
    Provides stability to your tripod

  11. Flip-lever leg locks
    Lift to adjust leg height, then close to lock

  12. Rubber feet
    Provide secure, non-marring footing for your tripod
    Tripod Components

Using Your Tripod

To setup your tripod:

  1. Open the flip-lever leg locks on each leg and extend the legs to the desired length.
  2. Close the flip-lever leg locks to lock the leg at the selected length.

Caution: Not correctly securing a leg lock can cause the tripod leg to retract unexpectedly and could result in damage to the tripod or a camera mounted on the tripod.

Customer Support

Shenzhen Apeman Innovations Technology Co., Ltd. Room 126, Buildingll, Huanan Avenue No.l Huanan City International Printing paper packaging, China
www.ralenos.com | support@ralenos.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals