TSC 6-61BP PreMoist Hygiene Swabs Save Time Instruction Manual
- June 26, 2024
- TSC
Table of Contents
INSTRUCTION FOR USE
PreMoist Swab Kits
6-61BP PreMoist Hygiene Swabs Save Time
All samples should be kept cool until testing is performed.
STEP 1
Identify the site to be sampled. STEP 2
Hold the swab with both hands and pull the swab cap away from the tube,
breaking the security seal in the process. 
STEP 3
Remove swab using the cap as a holder. Do not touch the swab tip or shaft
and make sure that it does not touch any surface before sampling.
STEP 4
Keep the open transport tube with solution within reach, sample designated
area using a template if possible.
If the area permits, swab in 3 planes (horizontal, vertical and diagonal)
whilst rotating. 
STEP 5
When sampling is completed insert swab into the tube and push cap on
tightly. 
STEP 6
Write sample details on label, store in a cool (4 ºC -8 ºC), dry area and
send to the laboratory within 24 hours for analysis.
FMCG Industry Solutions Pty Ltd
ABN 22 135 446 007
Factory 11A, 1 – 3 Endeavour Rd, Caringbah NSW 2229
www.fmcgis.com.au
sales@fmcgis.com.au
1300 628 104 or 02 9540 2288
Documents / Resources
| TSC
6-61BP PreMoist Hygiene Swabs Save
Time
[pdf] Instruction Manual
6-61BP PreMoist Hygiene Swabs Save Time, 6-61BP, PreMoist Hygiene Swabs Save
Time, Hygiene Swabs Save Time, Swabs Save Time, Save Time
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>