EDIFIER WH950NB Wireless Noise Cancellation Over Ear Headphones User Manual

EDIFIER WH950NB Wireless Noise Cancellation Over Ear Headphones User Manual

Power ON/OFF

Pairing

1. When they’re power off, press and hold the power button for 6s. The status light blinks blue.
2. Select “EDIFIER WH950NB” in your device setting to connect.

1st Pairing

1. Once the headphones are power on, they will enter Bluetooth pairing automatically. The status light blinks blue.
2.  Select “EDIFIER WH950NB” in your device setting to connect.

Fast Pair (Phone with Android 6.0+)
Power on and enter Bluetooth pairing with Android device close by. Then tap the pop-up window to connect effortlessly.

Note

1.  For subsequent use, the headphones will auto-connect to device used last time.
2. Dual-Device Connection:After connected to a device, restart and enter Bluetooth pairing to connect the second device. Then manually re pair the headphones again from the first device to complete Dual-Device connection.

Reset

1. The headphones are power on and disconnected from all devices.
2. Press and hold the ” ” and ” ” at the same time for 6s.
3. The status light blinks white until reset is completed.
4. Once the headphones are reset, they enter pairing mode automatically.

Status Light

Bluetooth Status

Blue LED blinks
Blue LED on for 3s
Blue LED blinks twice every 5s

Battery Status

Red LED blinks twice every 5mins
Red LED on
LED off

Controls

Note:

1. ANC Setting switch between “High Noise Cancellation” & “Ambient Sound” & “Noise Cancellation Off”.
2. Sound Mode switch between “Music Mode” & “Game Mode” & “Theatre Mode”.
3. Customized controls via Edifier Connect App.

Download the App

Scan and download Edifier Connect App

Note:
Images are for illustrative purposes only and may differ from the actual product.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   IC statement:CAN ICES-003(B) / NMB-003(B).

FCC ID: Z9G-EDF193
IC: 10004A-EDF193

210-196511
Input: 5V 1A

Hereby, Edifier International Limited declares that the radio equipment type EDF200102 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.edifier.com/int/eu-doc.htm

Declaration for EU
Frequency Band: 2400Mhz-2483.5Mhz
RF Power Output: ≤12dBm (EIRP)
There is no restriction of use.

Specific Absorption Rate (SAR) information:

This (Edifier International Limited) meets the government’s= requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types: (EDF200102) (FCC ID: Z9G-EDF193) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 0.032W/kg.
This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

For more information, please visit our website:
www.edifier.com

Model: EDF200102 Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong

www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.

Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different from actual product.
If any difference is found, the actual product prevails.

IB-200-WH950N-00 V1.0

References

• Headphones, Speakers | A Passion for Sound -【Edifier】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>