ETI GROUP PG-025 2.0CH Soundbar User Manual
- June 1, 2024
- ETI GROUP
Table of Contents
PG-025 2.0CH Soundbar
Specifications:
- Product Name: 2.0CH SOUNDBAR PG-025
- Dimensions: 143x210mm
- Power Input: DC 14V
- Power Adapter: AC 230V~
- Connectivity: ARC, USB, AUX, OPTICAL
-
- Features: USB, FM, Bluetooth
Product Usage Instructions:
1. Power On/Off and Volume Control:
To power on/off the soundbar and control the volume:
-
Press the On/Off button (1) to turn the soundbar on or
off. -
Use buttons (2) and (4) to decrease or increase the volume
respectively.
2. Playback Controls:
To control playback:
- Press Play/Pause button (3) to play or pause the audio.
- Press Prev/Next buttons (2) and (4) to navigate between
tracks.
3. Audio Source Selection:
To select the audio source:
-
Use the Mode button (5) to switch between different input
sources like USB, AUX, Bluetooth, etc. -
Ensure the correct audio source is selected for playback.
4. Bluetooth Connection:
To connect via Bluetooth:
- Press the Bluetooth Mode button on the soundbar.
- Search for “PG-025” on your device and pair with it.
- Once paired, the soundbar will make a sound confirming the
connection.
5. Troubleshooting:
If you encounter any issues with the soundbar, check the
connections, power supply, and audio sources. If problems persist,
contact a qualified technician.
FAQ:
Q: How do I change the battery in the remote control?
A: Follow these steps to change the battery in the remote
control:
1. Open the battery cover.
2. Insert a new battery.
3. Replace the cover.
Remember to recycle used batteries and keep them away from
children.
Q: How do I switch between different audio modes?
A: To switch between audio modes:
1. Press the Mode button on the soundbar or remote control.
2. The indicator light will change to signify the selected mode
(e.g., USB, AUX, Bluetooth).
143X210MM)
2.0CH SOUNDBAR PG-025
User Manual
Rear Panel
ARC
USB
AUX OPTICAL
DC IN
ARC
USB
AUX OPTICAL
DC IN
1
14V
2
3
4 1G-32G 5
Top Panel
5 4 32
1
+M
+M
1 2 34
5
1. On/Off 2. Prev/Decrease Volume 3. Play/Pause 4. Next/Increase Volume 5.
Mode
Rear Panel – Wiring Diagram
ARC
USB
AUX OPTICAL
DC IN
DC 14V
Power Adapter
AC 230V~
HDMI Cable
AUX Cable Optical Cable
Dear Customer,
Please read the instruction manual carefully before use and keep it in a safe
place for future reference.
IMPORTANT SAFEGUARDS
Before use, ensure that the mains voltage corresponds to the rating of the
unit. Place the unit in a cool, dry and clean place, free from vibrations. Do
not place any objects such as vases full of liquid, on top of the unit. If
liquid or a foreign object enters the unit, stop using it immediately, turn it
off and remove the plug from the mains supply. Keep the unit away from direct
sunlight. Handle the unit with care. Warning: There is uninsulated “dangerous
high voltage” in the unit. To prevent electric shock, do not remove the cover
or the rear plate yourself. Do not open the housing or try to repair the unit
yourself otherwise the warranty will become invalid. Repairs or other
operations must be conducted by a professional. When removing the plug from
the mains supply or connecting or disconnecting the cable, do not pull on the
power cable, rather grasp the plug/connector firmly. Make sure the power is
off before connecting or disconnecting. When the unit is off, please remove
the plug from the mains supply. Only use a soft, dry cloth to clean the unit.
In extreme cases, mild detergents poured onto a soft cloth can be used to
remove stubborn dirt. Never use volatile chemicals such as benzine or paint
thinners as these will damage the unit. This unit can only be used in
environments under elevation of 2000m, otherwise there may be potential safety
hazards. Do not use the unit in tropical climates. otherwise there may be a
safety risk. Do not block the vents otherwise the unit may overheat.
TECHNICAL PARAMETERS Output power: 30W (main unit) Speaker unit: 2 ” ×2 (main
unit) Sensitivity: 60dB Frequency range: 50Hz~16KHz SNR: 80dB
TROUBLESHOOTING
Check the adaptor connection to the unit as well as mains supply. Check
whether the unit is turned on.
Check whether the correct audio source has been selected.
If the problem still cannot be resolved after going through the above checks,
please contact a qualified technician.
FEATURES ACCESSORIES
USB, FM
OPERATING INSTRUCTIONS
Indicator
white white
white white white
AUX BLUETOOTH
1
2
14
3
13
4
12
5
6
11 10
7
9
8
white
Battery Installation
1.ON/OFF 2.MUTE 3. PLAY/PAUSE 4.PREV 5.DECREASE VOLUME 6.OPT 7.BT
8.MODE 9. REPEAT 10. ARC 11. AUX 12.NEXT 13. INCREASE VOLUME 14.EQ
1. Open the battery cover as shown in the above figure. 2. Insert a new
battery. 3. Replace the cover.
Caution Used batteries should be recycled. Keep out of children’s reach. DO
NOT use new and old batteries together. Change both the batteries at the same
time. When not using the remote control for a long time,remove the batteries
from the unit.
Warning:All batteries(packed or in use)must not be exposed to high temperature such as direct sunshine or fire.
Mode button
accessories unit.
white
1. Insert a USB memory device to the USB port 2. Press Mode button repeatedly
or the Mode key 3. Ensure that your USB is stored with MP3 audio. 4. Use the
controls on the unit or remote control to make adjustments.
Previous/Next Track. 5. Repeat:Repeat single track by pressing Repeat key once
or all tracks by pressing
Repeat key twice.
.
the other
unit.
Mode button
mode, after which the white indicator will light up
.
3. Make sure the audio setting of the sound source is set to HDMI.
A3.5mm audio connecting cable is required (incl uded in the list of accessories)
Connect one end of the 3.5mm audio connecting the other end to the 3.5mm AUX input interface of the unit.
ut interface and
Press the Mode button repatedly or the AUX
to AUX mode after which the white indicator will light up or show
Press MODE Button repeatedly, or the Bluetooth
after which the white indicator will blink
Turn on the Bluetooth on your device and search for PG-025. Once found, click
on it to pair. If the pairing is successful, the unit will make a sound.
Please note that the unit will automatically connect to this device (after one
successful connection) in the future as long as the Bluetooth setting is
turned on on both the unit and the device.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate r adio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If th is equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the
radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>