WESTIN SX10 Control Box Relocation Bracket Instruction Manual
- June 25, 2024
- Westin
Table of Contents
INSTALLATION INSTRUCTIONS
Control Box Relocation Bracket for SX10/10SR/12/12SR Winches
APPLICATION:
Bronco 2022-2024 (Excl. Bronco Sport)
PART NUMBER:
2600
SX10 Control Box Relocation Bracket
CONTENT
ITEM| QUANTITY| DESCRIPTION| TOOLS NEEDED
I| I| CONTROL BOX BRACKET|
2| 2| M6 HEX HEAD CAP SCREW|
3| 2| MG SPLIT LOCK WASHER|
4| 3| MG FLAT WASHER|
5| I| MG HEX NUT|
6| 4| M5 HEX DRIVE SOCKET HEAD SCREW|
7| 4| M5 SERRATED FLANGE HEX NUT|
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT
THREAD DAMAGE AND GALLING
PROCEDURE
-
Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim. -
Attach the control box to the control box bracket (item 1) using the M5 hardware (items 6 & 7). See Figure 1.
-
Attach the control box bracket to the vehicle using the M6 hardware (items 2-5). See Figures 1 & 2.
-
Tighten the M6 hardware to 7-8ft-lbs.
Note: Refer to the Cable Kit Instructions for wiring instructions.
WARNING
Failure to follow these instructions could lead to death, personal injury, and
/ or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance
with the installation instructions and apply torque to the specifications as
defined. DOUBLE CHECK ALL FASTENERS BEFORE INITIAL USE, AND PERIODICALLY IN
THE FUTURE TO ENSURE PROPER FUNCTION AND SAFETY.
DRILLING:
Most Westin products do not require drilling for installation. If drilling is
defined as required, use caution when drilling a vehicle. FAILURE TO REVIEW AN
AREA TO BE DRILLED MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS
WELL AS VEHICLE DAMAGE.
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO AVOID
PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
The Westin Receiver Hitches will have a visible tow rating label affixed
directly on the product.
User should never exceed the vehicle manufacturers maximum tow and weight
rating regardless of the capacity of the hitch. FAILURE TO FOLLOW THESE
GUIDELINES WILL VOID THE WESTIN WARRANTY AND MAY RESULT IN PERSONAL INJURY
AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING:
Some products may contain chemicals such as DEHP, which can cause cancer,
birth defects or other reproductive harm. For more info go to
www.p65warnings.ca.gov
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service 800-793-7846
www.westinautomotive.com