WESTIN 59-741255 XTS Front Bumper Bull Bar Instruction Manual
- June 13, 2024
- Westin
Table of Contents
WESTIN 59-741255 XTS Front Bumper Bull Bar
Product Information
- Product Name: XTS Front Bumper Bull Bar
- Application: Ford Bronco 2021-2022
- Part Numbers: 59-731255 (Round Bull Bar), 59-741255 (Angular Bull Bar)
APPLICATION: Ford Bronco 2021-2022
PART NUMBER: 59-731255, 59-741255
Contents
| Item | Quantity | Description |
|---|---|---|
| 1 | 1 | XTS Bull Bar (Round or Angular) |
| 2 | 10/8 | M8 Button Head Bolt (10 for Round Bull Bar, 8 for Angular Bull |
Bar)
3| 2| M8 Split Lock Washer (Round Bull Bar only)
4| 10/8| M8 Flat Washer (10 for Round Bull Bar, 8 for Angular Bull
Bar)
5| 8| M8 Serrated Flange Nut
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
PROCEDURE
- Remove contents from the box, and verify if all parts listed are present and free from damage. Carefully read and understand all instructions before attempting installation. Failure to identify damage before installation could lead to a rejection of any claim.
- FOR ROUND BULL BAR (P# 59-731255): With the XTS Bumper either off of the vehicle or installed on the vehicle loosely mount the XTS Round Bull Bar (Item 1) using the supplied M8 hardware. See Figure 1 for reference. Repeat for both the driver side and passenger side of the bull bar.
- FOR ANGULAR BULL BAR (P# 59-741255): With the XTS Bumper either off of the vehicle or installed on the vehicle loosely mount the XTS Angular Bull Bar (Item 1) using the supplied M8 hardware. See Figure 2 for reference. Repeat for both the driver side and passenger side of the bull bar.
- Align and adjust the XTS Bull Bar as necessary and torque all M8 hardware to 18 ft-lbs.
INSTALLATION COMPLETE
CARE INSTRUCTIONS
- REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
- STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
- GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER.
WARNING: Failure to follow these instructions could lead to death,
personal injury, and/or property damage.
Failure to follow these instructions could lead to death, personal injury,
and/or property damage.
FASTENERS
- All Westin-supplied fasteners must be utilized and installed in accordance with the installation instructions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS
- BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION AND SAFETY.
DRILLING
- Most Westin products do not require drilling for installation. If drilling is defined as required, use caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN
- PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
EYE PROTECTION
- ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO
- AVOID PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
- The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product.
- Users should never exceed the vehicle manufacturer’s maximum tow and weight rating regardless of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN
- WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
FOR CALIFORNIA RESIDENTS ONLY 65 WARNINGS:
Some products may contain chemicals such as DEHP, which can cause cancer,
birth defects, or other reproductive harm. For more info go to
www.p65warnings.ca.gov
Westin Automotive Products, Inc. 320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products for additional installation assistance
please call
Customer Service 800-793-7846
www.westinautomotive.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>