WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table Instruction Manual

Table of Contents

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig1

Do not overtighten screws. (Insert all screws before tighten screws.)

Please do not exceed the weight limitations of this item.
Do not stand on or use any part of this item as a step ladder.
Firmly secure all bolts, screws and nuts before use.
Reconﬁrm that all bolts, screws, and nuts are secure every 90 days.
Do not use or store this item in the proximity of open ﬂame or ﬂammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig3

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig4

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig5 WESTIN OUTDOOR OP4001 Sun
Lounger Set With Cushions And Table-fig6

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig7

Attach part C Lounger End Panel to part B Lounger Side Panels with 2 PCS of part 1 Bolt and part 3 Washer.

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig9

Attach part A Lounger Side Panel to part C Lounger End PaneL with 2 PCS of part 1 Bolt and part 3 Washer.

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig10

Attach part D Lounger End panel to part A and B Lounger Side Panels with 4 PCS of part 1 Bolt and part 3 Washer.
Attach part E Base Stand Support to part A and B Lounger Side Panels with 4 PCS of part 2 Bolt and part 3 Washer.

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig12

Attach part F Lounger Base to Lounger Body (combimed part A+B+C+D) with 8 PCS of part 1 Bolt and part 3 Washer.
Pull the end of the Lounger Base upward and attach the teeth onto part E Stand Support. Place the Cushion onto the Lounger Base to finish the assembly.
Do the same to assemble another Lounger.

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig14

Attach part G Table Long Panel to part I Table top with 2 PCS of part 1 Bolt and part 3 Washer.
Do not tighten the screws too much at this stage.
Attach 2 PCS of part H Table Side Panels to part G Table Long Panel and part I Table Top with 8 PCS of part 1 Bolt and part 3 Washer.
Attach part G Table Long Panel to part I Table top and part H Table side panels with 6 PCS of part 1 Bolt and part 3 Washer.
Check and tighten all bolts again to ensure this table is steady enough.

WESTIN OUTDOOR OP4001 Sun Lounger Set With Cushions And Table-
fig17