WESTIN OUTDOOR 9816272 20-Inch Round Hard Plastic Free Standing Umbrella Base Instruction Manual
- June 4, 2024
- WESTIN OUTDOOR
Table of Contents
WESTIN OUTDOOR 9816272 20-Inch Round Hard Plastic Free Standing Umbrella
Base
NOTICE
- Only fill with water when used in warm climates.
- Do not fill with water if exposed to freezing temperatures.
- Formation and expansion of ice may crack the base.
NO TOOLS REQUIRED HARDWARE PARTS
PRODUCT ASSEMBLY
Put part B Extend Pole into part A Plastic Base, attach part 2 Locking Bolt
and part 3 Washer to Extend Pole.
Pay attention that part C Connect Pole is already assembled on head of part
B.
Check the diameter of your umbrella pole and choose part C1 / C2 in suitable size.
- Take out part C1 and leave part C2 when the diameter is 48mm;
- Keep both C1 and C2 when the diameter is 38mm.
Insert your umbrella pole into part B.
Attach 2 PCS of part 1 Plastic head bolt onto part B Extend Pole, then tighten
them to keep your umbrella stable. Take off the cap and fill in with sand or
water. Seal the cap back and finish the assembly of base. CAUTION: The
plastic base will be very heavy after filling with sand or water. Be very
careful when moving these plastic bases in case of hurting your feet or
destroy the plastic base.
Thank you for purchasing this quality product.