Cudy POE150 Gigabit PoE Injector 15W Power Installation Guide

: June 27, 2024
: cudy

Table of Contents

Cudy POE150 Gigabit PoE Injector 15W Power
Product Information
Product Usage Instructions
Hardware Connection
Physical Appearance
LED and Interface Explanation
Specifications
EU declaration of conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Cudy POE150 Gigabit PoE Injector 15W Power

Product Information

Specifications:

Model	Output Voltage	PoE Power	Standard	Pin Polarity	Data Rates
POE150/POE200	54VDC	30W max	802.3af/at	1/2 (-), 3/6 (+)	10/100/1000Mbps

Input Power Requirements:

AC Input Voltage: 100 to 240 VAC
AC Input Current: 0.5A
AC Frequency: 50 to 60 Hz

Dimensions: 121mm x 50mm x 36mm

Indicators:

System Indicator: AC Power
User Indicator: Channel Power

Connectors: Shielded RJ-45, EIA 568A and 568B

Protection:

Over current protection
Overload protection
Over-voltage protection
Anti-interference protection

Environmental Conditions:

Operating Temperature: 0 to 40°C
Operating Humidity: Maximum 85%
Storage Temperature: -40 to 60°C

Product Usage Instructions

Hardware Connection:

Connect the Power Socket.
Connect the Ethernet Device (switch, router, etc.).

Physical Appearance:

AC Socket: Connect with AC cable.
Data/PoE: Connect to the Ethernet device with cable to transmit data.

LED and Interface Explanation:

Data/PoE Green: PoE injector with 100-240V power input.
Red: The terminal equipment connected to P+DATA port is powered.

Frequently Asked Questions (FAQ):

Q: What should I do if the device causes radio interference?
A: If the device causes radio interference in a domestic environment, the user may be required to take adequate measures such as repositioning the device or using shielding materials.
Q: How do I know if the device is compliant with EU directives?
A: Cudy has declared that the device is in compliance with essential requirements and relevant provisions of EU directives. The original EU Declaration of Conformity can be found at http://www.cudy.com/ce.

Hardware Connection

Physical Appearance

LED and Interface Explanation

Specifications

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

EU declaration of conformity

Cudy hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2015/863/EU, 2009/125/EC and 2011/65/EU. The original EU Declaration of conformity can be found at http://www.cudy.com/ce.

For support and warranty, please visit http://www.cudy.com/. Specifications are subject to change without notice. Cudy is a registered trademark of Shenzhen Cudy Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.Copyright©2022 Shenzhen Cudy Technology Co., Ltd. All rights reserved.