EPOMAKER Tide75 Wired Mechanical Keyboard User Guide

: June 25, 2024
: EPOMAKER

Table of Contents

EPOMAKER Tide75 Wired Mechanical Keyboard
Buttons Functions
PAIRING INSTRUCTIONS
How to Use VIA
SPECS
REPLACING KEYCAPS AND SWITCHES
Included Tools
TECHNICAL ASSISTANCE
WARRANTY
Contacts
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EPOMAKER Tide75 Wired Mechanical Keyboard

Buttons Functions

LIGHT EFFECTS

INDICATOR

Low Battery: Fn key blinks red
Charing: Fn key stays red
Charged: Fn key lights up with backlight
Win Lock: Win key lights up

FUNCTION KEY COMBINATIONS

PAIRING INSTRUCTIONS

PAIRING BLUETOOTH

Toggle the switch to the right, make sure that the keyboard is under the wireless mode:

Hold Fn+Q/W/E for 3-5 seconds till the indicator flashes fast, the keyboard is ready to pair.
Turn on your Bluetooth device and find “EPOMAKER TIDE 75”, then connect. When the keyboard is connected to the Bluetooth device, the indicator stops flashing and the connection is done.
Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.

PAIRING WIRELESS 2.4GHZ

Toggle the switch to the right, make sure that the keyboard is under the wireless mode:

Hold Fn+P for 3-5 seconds till the indicator flashes fast, the keyboard is ready to pair.
Insert the 2.4G dongle to your computer. When the keyboard is connected, the indicator stops flashing.

WIRED MODE

Toggle the switch to the left, plug the keyboard and press Fn + T.

Note: The battery charges under either wireless or wired mode, as long as the keyboard is plugged.

How to Use VIA

Please visit “https://github.com/WestBerryVIA/via-releases/releases” to download the latest VIA application for your computer’s OS. Turn OFF the button of “Use V2 definitions (deprecated)”

Import the JSON File to VIA

If the keyboard is assembled with the long spacebar: download EPOMAKER TIDE 75 Long Space json file via https://epomaker.com/blogs/qmk-via/epomaker-tide75-longspace-via-json and load the file;
If the keyboard is assembled with the split spacebar, download EPOMAKER TIDE 75 Split Space json file via https://epomaker.com/blogs/qmk-via/epomaker-tide75-splitspace-via-json and load the file.
When the loading is completed, the “Configure” Tab displays the layout and programmable functions.

SPECS

REPLACING KEYCAPS AND SWITCHES

For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switches

Before installing switches, be sure the pins are clean and straight.

Push Straight Down

Please be gentle. Be sure the pins are aligned with the slots.

Included Tools

Remove Switches

Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
Using firm but gentle force pull the switch away from the keyboard using a vertical motion.

Install Switches

Check that all the switch metallic pins are perfectly straight and clean.
Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.

Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE

For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.

COMMUNITY FORUMS

Join our community and learn together with other keyboard enthusiasts.

WARRANTY

EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear.
If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.

We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.

Contacts

Should you require more assistance please email us at support@epomaker.com

Made in China

Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road, Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com

Scan

APEX CE SPECIALISTS GMBH