ENFORCER SM-200Q-W Screw Terminal Surface Mount Contacts Owner’s Manual
- June 24, 2024
- ENFORCER
Table of Contents
ENFORCER SM-200Q-W Screw Terminal Surface Mount Contacts Owner’s Manual
Features
- Surface-mount magnetic contacts
- Screw mount using side tabs
- Terminal cover provided (required for all applications)
- ABS plastic case has lip to prevent wires from accidentally touching metal mountings and slotted mounting holes for easier gap adjustment
- Contact reed switch is SPST, deactivated rhodium on gold underplating for a longer expected life
- For closed loop circuits (SM-200Q only)
- For open loop circuits (SM-300Q only)
- 3 /4″ (19mm) Gap (SM-200Q only)
- 1 /2″ (13mm) Gap (SM-300Q only)
- Mounting screws included
- Lifetime limited warranty
Parts List:
| 10x | Contact Switches | 10x | Magnets |
|---|---|---|---|
| 1x | Manual | 10x | Terminal Covers |
Installation
Please read the manual carefully before beginning installation.
- Mount the contact above the door or window on the frame. For doors, ensure that the mounting is farthest from the hinged side of the door.
- Connect two wires to the contact terminals and to the alarm control panel.
- Mount the magnet on the door/window so that it will face the contact. Be sure that the gap between the contact and magnet does not exceed 3 /4″ (19mm) (SM-200Q only) or 1 /2″ (13mm) (SM-300Q only).
NOTES
- Contact and magnet must be installed on the protected side of the door or window.
- Spacers are included for difficult or misaligned installations.
LIFETIME LIMITED WARRANTY : This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for the lifetime of the product. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. Under no circumstances will SECO-LARM be responsible for any costs or charges for removal, installation, or reinstallation. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO- LARM, and the purchaser’s exclusive remedy, shall be limited to repair or replacement only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else. This lifetime limited warranty is for products sold and installed in the United States and Canada. For all other countries the warranty is 1 (one) year.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2019 SECO-LARM U.S.A., Inc. All rights reserved.
SECO-LARM ® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
Phone: 949-261-2999 |
800-662-0800 Email: sales@seco-
larm.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>