WATTS FP-BF-BMS-IMS-FZ Freeze Sensor Connection Kit Instruction Manual
- June 24, 2024
- WATTS
Table of Contents
WATTS FP-BF-BMS-IMS-FZ Freeze Sensor Connection Kit
Specifications
- Product Name: ES-FZSensorConnectionKit
- Model: Freeze Sensor Connection Kit
- For: Select Watts and Febco assemblies or standalone outdoor operation
- Power Requirement: DC 24V
- Includes: Freeze sensor, mounting clip, activation module, wire nuts (2), power adapter, Quick Start Guide
Product Usage Instructions
Installation
Before starting the installation process, thoroughly read all installation
instructions and product safety information provided in the user manual.
Connect the DC 24V power adapter to the input terminals as follows:
- Positive wire to terminal 1
- Ground wire to terminal 2
Connect the sensor cable to the input terminals:
- One wire to terminal 3
- The other wire to terminal 4
Connect the third-party BMS or IMS cable to the output relay terminals:
- One wire to COM terminal 6
- The other wire to either NO terminal 5 or NC terminal 7
Operation
The SentryPlus Alert system monitors temperature and alerts facility
personnel when freeze conditions can cause damage to equipment. The kit
includes two temperature sensors for flexible installation options.
Activation Module
The mountable activation module contains the electronic circuit assembly,
interfaces with the sensors, provides connectivity to third-party systems, and
is compatible with Wi-Fi networks.
- Size: 3.00 W x 4.75 H x 0.75 D
- Weight: 0.2 lb
Engineering Specification
- Job Name ––––––––––––––––––––––––––––––––––––––––––––
- Contractor ––––––––––––––––––––––––––––––––––––––––––––
- Job Location ––––––––––––––––––––––––––––––––––––––––––
- Approval ––––––––––––––––––––––––––––––––––––––––––––––
- Engineer –––––––––––––––––––––––––––––––––––––––––––––
- Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
- Approval –––––––––––––––––––––––––––––––––––––––––––––
- Representative–––––––––––––––––––––––––––––––––––––––––––––
Freeze Sensor Connection Kit
FOR SELECT WATTS AND FEBCO ASSEMBLIES OR STANDALONE OUTDOOR OPERATION
WARNING: The freeze sensor solely provides alerts about a possible freeze
event and cannot prevent a freeze event from occurring. User action is
required to prevent freeze conditions from causing product and/or property
damage.
SentryPlus Alert® Freeze Sensor Connection Kit for activating a valve-mounted
or standalone outdoor sensor and triggering alerts at low and freezing
temperatures. Compatible with building management systems, irrigation
management systems, and Wi-Fi networks.
Features
- Built-in Wi-Fi function to communicate freeze alerts directly to the user, eliminating the need for a third-party controller
- Included standalone sensor to provide flexibility in locating a measuring tool at or near any water-carrying outdoor installation vulnerable to freezing conditions
- Switched output relay to supplement BMS or irrigation management systems with reinforced control of sprinkler systems
Contents
- Freeze sensor in mounting clip
- Standalone outdoor sensor
- Activation module
- Wire nuts (2)
- DC 24 V power adapter
- Quick Start Guide
For the following assembly series, sizes ½” to 2″.
Call customer service if you need assistance with technical details.
| Watts | FEBCO **** |
|---|---|
| 007 | 765 |
| 007M1DCDA | 850 Small |
| 800M4FR | LF850 Small |
| 800M4QT | |
| LF007 | |
| LF800M4FR | |
| LF800M4QT | |
| SS007 |
For the following assembly series, sizes ½” to 2″.
Call customer service if you need assistance with technical details.
NOTICE: The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this product
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold
Wiring Schematic
Operation
The SentryPlus Alert system monitors temperature and alerts facility personnel when freeze conditions can cause damage to equipment. The Freeze Sensor Connection Kit includes two temperature sensors, allowing the user to choose the one more suitable for installation. One sensor can be mounted to a valve assembly; the other is installed outdoors as a standalone unit. (The valve- mounted sensor does not alter valve functions or certifications.)
When the kit is installed with either sensor, the sensor is activated and wired to a monitoring system. As temperature measurements fall below 37°F and below 32°F, the monitoring system relays a signal to a connected building or irrigation management system, allowing freeze alerts to be distributed according to the BMS or IMS application. When the monitoring system is Wi-Fi enabled, notifications can be issued through the Smart Freeze Alert cloud service (included).
Specification
The connection kit shall be capable of activating the valve-mounted sensor or the standalone outdoor sensor. The activation module shall include a Wi-Fi function.
When the kit is installed with either sensor, the sensor shall be activated and wired to a monitoring system. As temperature measurements fall below 37°F and below 32°F, the monitoring system shall relay a signal to a connected building or irrigation management system, allowing freeze alerts to be distributed according to the BMS or IMS application. When the monitoring system is Wi-Fi enabled, notifications shall be issued through the Smart Freeze Alert cloud service (included).
The connection kit shall include a freeze sensor in a mounting clip, tekmar Outdoor Sensor 070, an activation module, two wire nuts, and a power adapter. The kit shall be purchased separately from any valve assembly
Activation Module
The mountable activation module contains the electronic circuit assembly,
interfaces with the valve-mounted sensor or the outdoor sensor, provides
connectivity to the BMS or the irrigation management system input terminal,
and is compatible with Wi-Fi networks. Size: 3.00″ W x 4.75″ H x 0.75 D.
Weight: 0.2 lb.
- LEDs indicate the status of power to the unit, Wi-Fi, and alerts.
- The multifunction button contains four operations: Messages OFF, Wi-Fi ON/OFF, Reset, and Test.
- Programmed with two thresholds to alert the user when temperature measurements fall below 37°F and 32°F.
- Designed with a Wi-Fi function to transmit messages directly to the user, through the Smart Freeze Alert cloud service (included).
Messaging can be silenced without disabling the Wi-Fi function
For more information, refer to IS-FZSensorConnectionKit at watts.com.
Valve-mounted Freeze Sensor
Thermistor in a mounting clip for attachment to the test cock of a valve
assembly. Total weight of sensor and clip: <0.5 lb.
Standalone Outdoor Sensor
NTC thermistor built into compact, UV-resistant enclosure for outdoor
installation. For more information, refer to tekmar Outdoor Sensor 070 at
watts.com.
DIMENSION
Power Adapter
- Output DC voltage 24V ±2.0%
- Output current range 0 ~ 1.04A
- Input voltage range 90 ~ 264VAC
- Input frequency range 47 ~ 63Hz
- Input AC current 0.65A/115VAC 0.25A/230VAC
MORE INFORMATION
- USA: T: 978-689-6066
- Canada: T: 888-208-8927
- Latin America: T: (52) 55-4122-0138
FAQ
- Q: Can the freeze sensor prevent freeze events from occurring?
- A: No, the freeze sensor solely provides alerts about possible freeze events; user action is required to prevent freeze conditions from causing damage.
- Q: What should I do if I encounter connectivity issues or power outages affecting the alerts?
- A: Watts is not responsible for failures due to connectivity issues or power outages. Ensure proper installation and contact customer service for assistance.
- Q: Can I purchase the connection kit separately from any valve assembly?
- A: Yes, the kit is designed to be purchased separately and can be used with select Watts and Febco assemblies or standalone outdoor operations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>