eufy SECURITY SoloCam S230 Solar Security Camera User Guide
- June 25, 2024
- eufy SECURITY
Table of Contents
eufy SECURITY SoloCam S230 Solar Security Camera User Guide
1 PRODUCT OVERVIEW
- Solar Panel
- Camera Lens
- Motion Sensor
- Photosensitive Sensor
- Microphone
- LED Indicator
- SYNC Button
- Type-C Charging Port
- Mounting Hole
- Speaker
2 CHARGING SOLOCAM
Battery-powered
1 SETTING UP SOLOCAM
Download the App and Set up the System
- Download and install the eufy Security app, and sign up for an account.https://apps.apple.com/us/app/eufy-security/id1424956516https://play.google.com/store/apps/details?id=com.oceanwing.battery.cam&hl=en_IN
- Follow on-screen instructions to add your SoloCam .
4 MOUNTING SOLOCAM
Select a Location
SoloCam S230 can be mounted on a wall. Select a location where you can get the
desired view. We recommend hanging it 7-10 ft (2-3 m) above the ground.
To maximize the solar panel efficiency, select a location where SoloCam S230
can receive more sunlight.
Mount SoloCam S2 3 0
SoloCam S230 can be mounted both outdoors and indoors.
- Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it.
- Drill holes with a 15/64 inch (6 mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.
- Firmly screw the knob of the mounting bracket into the mounting hole of SoloCam.
- Hold and screw SoloCam to the mounting bracket. Rotate SoloCam to adjust the view and check it using the live stream which you can access in the eufy Security app.
SoloCam S40 can be also installed on the ceiling. Follow the steps 1-4 mentioned above to install it.
Tips: For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status.
5 NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations. The following importer is the
responsible party. Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8TH
ST, STE 501, BELLEVUE, WA 98004 Telephone:
1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
The recommended temperature range for devices and accessories is -20°C to 6 0°C (Charging temperature is 0°C to 40°C) .
Warning:
– Replacing a battery with an incorrect type may bypass safeguards and create
danger;
– Disposal of a battery in a fire or other source of significant heat, or by
crushing, or cutting, may result in an explosion as well as leakage of
flammable liquids and gases;
– Leaving a battery in an extremely hot environment may result in an explosion
as well as leakage of flammable liquids and gases;
– A battery subjected to extremely low air pressure may result in an explosion
as well as leakage of flammable liquids and gases.
Customer Service
Warranty 12-month limited warranty
Call Us United States +1 (800) 988 7973
United Kingdom +44 (0) 1604 936 200
Germany +49 (0) 69 9579 7960
Mon-Fri 6:15-17:00(PT) Sat-Sun 6:30-16:30(PT)
Mon-Fri 6:00-17:00 Sat-Sun 6:00-14:00
Mo-Fr 8:00-16:00
Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>