medela 35ml Colostrum Protector User Guide

35ml Colostrum Protector

“`html

Specifications:

• Product Name: Colostrum Protector
• Capacity: 5ml
• Material: PP (Polypropylene)

Product Usage Instructions:

Assembling the Colostrum Protector:

1. Ensure correct orientation by verifying that the side with
   smiley faces, vent hole, and graduated markings are facing up.

2. Attach the breast shield to the top of the Colostrum
   Protector.

3. Assemble the breast pump kit following the provided
   instructions.

Disassembling the Colostrum Protector:

1. Remove the Colostrum Protector from the connector, keeping the
   breast shield attached.

2. Place it on a flat surface.

3. Remove the breast shield.

4. Secure the lid for storage.

Cleaning and Maintenance:

1. Rinse with clear water after each use.

2. Wash in a dedicated wash basin using a clean dishcloth or soft
   brush.

3. Rinse with clear water again.

4. Allow to air dry on a clean surface or towel.

5. Store in a clean, cool place when not in use. Do not store wet
   or damp parts.

6. Dispose or recycle after 24 hours of use according to local
   regulations or hospital protocol.

FAQ:

Q: How often should I wash the Colostrum Protector?

A: It is recommended to wash the Colostrum Protector after each
use to maintain cleanliness and hygiene standards.

Q: Can I reuse the container for multiple pumping

sessions?

A: For infants in the NICU, it is advised to use a new container
for each pumping session following HMBANA best practices.

“`

Colostrum Protector Quick Start Guide
Step by step guide on how to assemble and use the Colostrum Protector

How to assemble your Colostrum Protector

Parts & Features
Lid
Smiley Faces

1
Attach the collector to Symphony® breast pump kit connector.

2
Ensure correct orientation* to allow for venting and prevent colostrum from spilling from the vent hole into the container below.

3
Attach the breast shield to the top of the Colostrum Protector.

4
Assemble the breast pump kit.

Vent Hole

Container

Graduated Markings

*Correct Orientation Tips:

Ensure the side

with the smiley

faces, vent hole,

and graduated

markings are

facing up .

MAX

5ml

3
NOTE:
The side with

nothing on it

should be facing

down .

Low visibility ­ feel for the bumps on the back of the smiley faces.

Correct Assembly

+ Incorrect Assembly

How to disassemble your Colostrum Protector

1
Remove the Colostrum Protector from the connector, leaving the breast shield attached.

2
Place on a flat surface.

3
Remove the breast shield.

4
Secure the lid.

More information
Scan the QR code for further information about your Colostrum Protector

Wash after each use*

Wash in a dedicated wash basin

1
Rinse with clear water.

2
In a dedicated wash basin for breast pump parts, soak in warm, soapy water for 5 minutes. · Do not place directly in the sink.

3
Wash with a clean dishcloth or soft brush.

4
Rinse with clear water.

5
Place on a clean surface and/or towel and allow to air dry.

6
Store in a clean, cool place when not in use. Do NOT store wet or damp parts.

7
Discard or recycle after 24-hours of use according to local regulations or hospital protocol.

05
PP

*When using the Colostrum Protector for infants in the NICU, follow HMBANA best practice, which recommends using a new container for each pumping sessions.

Content appearance may vary. Refer to product instructions for use for complete instructions.
Jones, F. Best Practice for Expressing, Storing, and Handling Human Milk in Hospitals, Homes, and Child Care Settings. 4th ed Fort Worth, TX: Human Milk Banking Association of North America, Inc. (2019), pg 59 Medela wordmark and logo and Symphony are registered in the U.S. Patent and Trademark Office and the Canadian Intellectual Property Office. Science of Care is a trademark of Medela. 15400097 B 0823© 2023 Medela

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>