VORTICE MEDIO I Booklet Centrifugal Fan Instruction Manual

: June 22, 2024
: VORTICE

Table of Contents

VORTICE MEDIO I Booklet Centrifugal Fan
Product Information
Product Usage Instructions
Frequently Asked Questions
TYPICAL APPLICATIONS
DESCRIPTION AND OPERATION
MODELS
INSTALLATION
ELECTRICAL CONNECTIONS
TIMER SETTING
MAINTENANCE CLEANING
IMPORTANT USER INFORMATION
WARRANTY
Documents / Resources

VORTICE MEDIO I Booklet Centrifugal Fan

Specifications

Model: VORT QUADRO MEDIO I
Product Code: 5.671.084.400
Date: 22/11/2023

Product Information

The VORT QUADRO MEDIO I is a versatile appliance designed for various applications. It is built for durability and reliability, providing efficient performance.

Product Usage Instructions

General Applications

The appliance can be used in a variety of settings for different purposes. Follow the instructions below for proper usage:

Description and Usage

Understand the different features and functions of the appliance to utilize it effectively. Refer to the user manual for specific instructions on its operation.

Models

There are multiple models available, each catering to specific needs. Choose the model that best suits your requirements.

Warning – Precautionary Measures

Ensure safety by following all safety guidelines provided in the manual. Adhere to precautionary measures to prevent accidents or damage.

Installation

Properly set up the appliance according to the installation guidelines provided in the manual. Securely place the appliance in a suitable location.

Electrical Connections

Connect the appliance to the power source as instructed in the manual. Ensure all electrical connections are secure and meet safety standards.

Timer Settings

Adjust the timer settings according to your requirements for efficient operation and energy conservation.

Maintenance / Cleaning

Regularly maintain and clean the appliance to ensure optimal performance and longevity.

Frequently Asked Questions

Q: How do I adjust the timer settings?

A: To adjust the timer settings, refer to the specific instructions provided in the user manual. Typically, there will be a designated button or dial for setting the timer.

Q: Is it safe to clean the appliance with water?

A: It is recommended to follow the cleaning instructions provided in the manual. Use a damp cloth for cleaning and avoid direct contact with water to prevent damage.

Read these instructions carefully before installing and connecting this appliance.
Vortice cannot assume any responsibility for damage to property or personal injury resulting from failure to abide by the instructions given in this instruction booklet.
Following these instructions will ensure a long working life and overall electrical and mechanical reliability. Keep this instruction booklet in a safe place for reference purposes.
This symbol indicates that the operation must be carried out by a suitably qualified person.

TYPICAL APPLICATIONS

DESCRIPTION AND OPERATION

The product you have purchased is a professional centrifugal extractor fan for recessed wall installation, ventilation of rooms, and extraction into a single duct.
The motor is protected against thermal overloads;
Splash protection makes the product ideal for applications in high-humidity environments.
MEDIO I: 2-speed motor.

MODELS

A. I model

The product is operated through an external switch (fig.21).

B. I T model

This model is equipped with a timer which is factory-set for a minimum operating time of 3 minutes. The timer may be set at between 3 and approximately 20 minutes by adjusting the trimmer (see fig. 28).
The appliance switches on automatically a few seconds after the light is switched on and continues to run for the set time after the light is switched off. (fig.22)

C. I T HCS EP AC model (Humidity Control System)

The appliance features a relative humidity sensor that is factory-set at 60%. When relative humidity exceeds that level, the appliance automatically starts up.
The circuit is also equipped with a timer that can be set at between 3 and approximately 20 minutes by adjusting the trimmer (fig. 28).
The appliance starts up automatically at the selected speed a few seconds after the light comes on and continues to function for the set time even after the light is switched off (fig.22)

WARNING – CAUTION

Warning: this symbol indicates precautions that must be taken to avoid injury
Do not use this appliance for purposes other than those described in this booklet.
After removing the appliance from its packaging, ensure that it is complete and undamaged.
If in doubt, contact a professionally qualified electrician or Vortice*. Do not leave packaging within the reach of children or infirm persons.
Certain fundamental rules must be observed when using any electrical appliance, including:
- a) do not touch it with wet hands;
- b) do not touch it while barefoot.
Store the appliance out of reach of children and infirm persons after disconnecting it from the power supply.
Do not operate the appliance where inflammable vapours or substances are present (alcohol, insecticides, petrol, etc.)
Take all necessary precautions to ensure that there are no backflows of gas into the room from open-flued combustion appliances.
This appliance can be used by children no less than 8 years of age and by individuals with limited physical, sensory, or mental capacities, or by inexperienced or untrained individuals, provided that they are supervised or have been instructed in the safe use of the appliance and understand the associated risks. Children must not play with the appliance.
Cleaning and maintenance procedures that can be undertaken by the user must not be entrusted to children, unless under supervision.
Caution: this symbol indicates precautions that must be taken to avoid damaging the appliance.
Do not make modifications of any kind to the appliance.
Do not expose the appliance to the weather (rain, sun, etc.).
Periodically inspect the appliance for damage.
If any faults are found, do not operate the appliance; contact Vortice* immediately.
If the appliance malfunctions or develops a fault, contact Vortice* immediately. Ensure that only genuine original Vortice spares are used for repairs.
If the appliance is dropped or suffers a heavy blow, have it checked immediately by Vortice*.
The appliance must be installed by a professionally qualified electrician only.
Ensure that the electrical system to which the appliance is connected complies with applicable standards.
The appliance is double insulated and therefore does not need to be earthed.
Check that the electrical power supply/socket provides the maximum electrical power required by the appliance.
If this is not the case, arrange for a qualified electrician to make the necessary modifications.
Use a multi-polar switch with minimum contact gaps of 3 mm to install the appliance.
The timers on the TIMER and T HCS models must be configured by qualified professional personnel.
Switch off the appliance at the main switch:
a) if the appliance does not function correctly;
b) before cleaning the outside of the appliance,
c) if the appliance is not to be used for any length of time.
The appliance’s outlet vent must be fitted to standard ventilation hoses (nominal Ø 100 mm) (fig.6).
Ensure that the room has an adequate source of fresh air to ensure correct appliance operation. If other non-sealed combustion-based appliances (such as a water heater or gas stove) are installed in the same room, check that air replacement is sufficient for all appliances to work effectively together.
Do not use the appliance to control the activation of water heaters, room heaters, etc., nor should it discharge into the hot air flues of such appliances.
Ensure that the appliance discharges into a single duct (dedicated to this product) or directly to the outside.
The air to be extracted from the room must be clean (i.e. free of grease, soot, chemical and corrosive agents, explosive or flammable mixtures).
Keep the appliance’s intake and outlet grilles free to ensure an optimum flow of air.
The appliance is fitted with a PUR (polyurethane) mesh filter. This can be cleaned by shaking, blowing, or washing in water. Check the condition of the filter and wash or replace it at least every 6 months of operation (fig. 33-34).
The appliance is delivered from the manufacturer with the air outlet at the side.

N.B.

If the appliance is mounted on a wall that has been tiled, a spacer is needed to eliminate any misalignment and ensure correct functioning.
The appliance must be installed by a professionally qualified electrician.
A multi-pole switch must be used to install the appliance. The contact opening gap must be no less than 3 mm.

INSTALLATION

Check that the power supply specifications comply with the electrical data on data plate A.
Fit the discharge in the direction required.
Three sides of the wall box have recesses to permit installation of a sleeve (supplied) of nominal diameter 75-80 mm to provide the appliance with an additional air intake for connection by hose to a second room, bathroom, cellar, storage room, etc.

ELECTRICAL CONNECTIONS

TIMER SETTING

MAINTENANCE CLEANING

Do not immerse the appliance in water or other liquids.

IMPORTANT USER INFORMATION

IN CERTAIN EUROPEAN UNION COUNTRIES THIS PRODUCT DOES NOT FALL WITHIN THE REQUIREMENTS OF THE NATIONAL LAWS IMPLEMENTING THE WEEE DIRECTIVE, AND IN THESE COUNTRIES THE PRODUCT IS NOT SUBJECT TO SEPARATE DISPOSAL OPERATIONS AT THE END OF ITS WORKING LIFE.

Important

This product conforms to EU Directive EU 2012/19/EC
This appliance bears the symbol of the barred waste bin. This indicates that, at the end of its useful life, it must not be disposed of as domestic waste, but must be taken to a collection center for waste electrical and electronic equipment, or returned to a retailer on purchase of a replacement.
It is the user’s responsibility to dispose of this appliance through the appropriate channels at the end of its useful life. Failure to do so may incur the penalties established by laws governing waste disposal.
Proper differential collection, and the subsequent recycling, processing, and environmentally compatible disposal of waste equipment avoids unnecessary damage to the environment and possible related health risks and also promotes recycling of the materials used in the appliance.
For further information on waste collection and disposal, contact your local waste disposal service, or the shop from which you purchased the appliance.
Manufacturers and importers fulfill their responsibilities for recycling, processing, and environmentally compatible disposal either directly or by participating in collective systems.

WARRANTY

WARRANTY – OTHER COUNTRIES

The consumer has by law, free of charge, the legal guarantee of conformity with the seller, as described in Directive (EU) 2019/771 in force since January 1, 2022. EU member countries also refer to local regulations.
VORTICE S.p.A. reserves the right to make improvements to products at any time and without prior notice.

VORTICE GROUP COMPANIES

VORTICE S.p.A.
Strada Cerca, 2 – frazione di Zoate
20067 – Tribiano (MI)
Tel. +39 02-90.69.91
ITALY
vortice.com
[email protected]

VORTICE LIMITED

Beeches House-Eastern Avenue
Burton on Trent – DE 13 0BB
Tel. +44 1283-49.29.49
UNITED KINGDOM
vortices. ltd. UK
[email protected]

Documents / Resources

| VORTICE MEDIO I Booklet Centrifugal Fan [pdf] Instruction Manual
COD. 5.671.084.400, MEDIO I Booklet Centrifugal Fan, MEDIO I, Booklet Centrifugal Fan, Centrifugal Fan, Fan
---|---