wiltec 64758 Fruit Cutting Mill Instruction Manual

June 21, 2024
wiltec

wiltec logo 64758 Fruit Cutting Mill
Instruction Manual

Operating instructions
Fruit Cutting Mill 64758
Illustration similar, may vary depending on model

64758 Fruit Cutting Mill

Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. Wilted Wild anger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown.
Although Wilted Wild anger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to: service@wiltec.info 
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wild anger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
Retourenabteilung
WilTec Wild anger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15

Introduction

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Danger and warning signs

| Thoroughly read the instructions Familiarise yourself thoroughly with the controls and proper use of the device.
---|---
U S SAWS JS160 Propane Joint Clean Out Saw - Icon| Read it thoroughly before putting the device into operation.
| Full face protection must be worn.
| Hearing protection and eye protection must be worn.
| Protective gloves must be worn.
| ALWAYS keep people at a safe distance from the work area, especially when operating the machine. Children  must never be allowed in working areas.
| Keep unauthorised persons away from your working area.
| NEVER use power tools in damp or wet rooms and never expose them to rain.
| Switching the motor off: Pull out the plug before adjusting or cleaning the device or if the cable gets caught.  Also switch off the device if the shredder is to be left unattended.
| NEVER place your hands in the funnel next to the rotating blades.

Safety instructions

  • Never allow persons who are not familiar with these instructions to use the fruit chopper.

  • Local regulations may restrict the age of the operator – not suitable for use by children.

  • Do not operate this fruit chopper in the vicinity of bystanders. The user is responsible for accidents or hazards that occur to other persons or their property.

  • Do not allow hands, other body parts, or clothing to get into the housing, the funnel, or near a moving part.

  • Safety goggles must be worn when operating the fruit chopper.

  • Avoid wearing loose-fitting clothing or jewellery. They can be caught by moving parts and cause serious injuries.

  • Only operate the fruit chopper on a firm and level surface.

  • Before putting the fruit chopper into operation, make sure that all screws, nuts, bolts, sieves, and other fastening elements are properly secured. Replace damaged or illegible warning and operating signs.

  • Make sure that the housing is empty.

  • Keep your face and body away from the filler opening.

  • Do not stoop down too far. Ensure a safe stand and keep your balance. Never stand higher than the base of the fruit chopper when inserting material.

  • Always keep clear of the discharge area when operating the fruit chopper.

  • When feeding in material, make sure that it does not contain any metal parts, stones, bottles, cans, or other foreign objects.

  • ALWAYS pull out the plug ◦ when the device is unattended or being transported;
    ◦ before you remove blockages;
    ◦ before checking, cleaning, or working on the fruit chopper in any other way;
    ◦ after a foreign object has got inside – then check the fruit chopper for damage and have it repaired if necessary;
    ◦ if the fruit chopper starts to vibrate unusually or makes unusual noises (check immediately).

  • If the cutting mechanism hits foreign objects or if the fruit chopper makes unusual noises or vibrations, ◦ check for damage,
    ◦ replace or repair damaged parts, ◦ check if any parts are loose and tighten them.

  • Do not attempt to repair the fruit chopper unless you are able to do so. Ensure that processed material does not accumulate in the ejection area; this can prevent proper emptying and lead to the material being pushed back through the feed opening.

Electric safety

  • Connect the mains cable to a normal 230 V/50 Hz power supply using an appropriately fused plug. If the plug is damaged, it must be disposed of to avoid the risk of electric shock and must never be used elsewhere. Your fruit  chopper is double insulated for safety reasons and does not require an earth connection. The operating voltage is 230 V at 50 Hz.
  • Extension cable: The cable type used must be two-core and double-insulated and have a crosssection of 3×1.0 mm². Contact an electrician if you are unsure.

Operation

  • Place the device on a firm and level surface or, if necessary, on a work surface and connect it to the power supply via a residual current circuit breaker (RCD).

  • Place a collecting container, e.g., a barrel or box, under the outlet opening to collect chopped fruit. Then start the device by pressing ON. When the device is running at full speed, you can feed the material into the hopper. DO NOT apply excessive force!
    Important!
    ◦ Start the device FIRST and only add the fruit AFTER the machine has been put into operation. Attention! The cutting blades pull the material into the machine independently.
    ◦ NEVER push material into the funnel with your hands.
    ◦ The material must be dimensioned so that it can easily enter the hopper.
    ◦ If the machine is clogged and no longer ejects anything, switch it off IMMEDIATELY and unplug it.

  • The material in the pipe must be removed using industrial gloves. Make sure that you do not come into contact with the blade and use a stick if necessary.

  • Make sure that all parts are properly fastened before connecting the device to the mains and switching it on again.

Cleaning and maintenance

Maintenance
Maintenance is limited to keeping the system clean and free from corrosion caused by the malic acid contained in the juice.

  • Dry the machine after cleaning to prevent rust from forming.
  • Lightly oil all surfaces with anti-rust oil to prevent rust formation if the device is not used for a longer period of time.

Cleaning

Always ensure that the device is switched off and disconnected from the power supply before carrying out cleaning work.

  1. Remove the 4 screws from the main housing.
  2. Remove the rotating disc attached to the cutting plate and remove the cutting plate from the base plate to clean it.
  3. If you need to remove the cutting plate, you can manually remove the fixed screw in the centre of the cutting plate and then remove the cutter head for cleaning.
    Make sure that you do not come into contact with the cutting blades when cleaning to avoid injury.wiltec 64758 Fruit Cutting Mill - reverse
orderReassemble the device in reverse order.

Technical specifications

Power supply (V / Hz) Power/speed (W /rpm) 230 / 50

550 / 2800
Chopping speed (4 aPPInA)| approx. 300-500
IP code| IP54
Outer size| 420 x 340 x 520
Size (mm) Io of funnel| 133

Parts list and exploded view

N2 Name Qty. N2 Name Qty.
1 Hopper 1 13 Shaft seal 1
2 Hex bolts M8x65 4 14 Cross-head countersunk screws 6
3 08 mm washer 16 15 M8x2o hex screws 4

4
5| Cover| 1| 16
17| 08 mm spring washer| 4
Gasket| 1| 08 mm washer| 4
6
7| M6xi6 hex bolt| 1| 18
15| Lower plate| 1
06 mm spring washer| 1| M8 locking nut| 8
8| Washer| 2| 20| M8x65 hex screws| 4
9| Cutting plate| 1| 21| 06 mm washer| 4
io| Guide plate| 2| 22| Motor| 1
11
12| 04 mm washer| 6| 23| Frame| 1
M4 locking nut| 6| |

wiltec 64758 Fruit Cutting Mill - reverse order1

Regulations for waste disposal
The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was implemented in the German law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossedout wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR (Stiftung Elektro-Altgeräte Register) under the WEEE-registration number DE45283704.
Disposal of used electrical and electronic devices (intended for use in the countries of the European Union and other European countries with a separate waste collection system for these devices). The symbol on the packaging or the product itself indicates that this product must not be treated as normal domestic waste but must be disposed of at a recycling collection station for electrical and electronic waste. By disposing of this product correctly, you contribute to the protection of the environment and the health of your fellow people. Inappropriate disposal threatens the environment and health.

Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by your local commune, the municipal waste disposal facilities, or the store where you purchased the product.

wiltec logoAddress:
WilTec Wild anger Technik GmbH
Königsbenden 12 / 28
52249 Eschweiler Germany
Important note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wild anger Technik GmbH.
© by WilTec Wild anger Technik GmbH http://www.wiltec.de
Item 64758

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals