VIMAR 22292.CC.15 Eikon USB Supply Unit Instruction Manual
- June 21, 2024
- VIMAR
Table of Contents
EIKON
22292.CC.15
Read the instructions before installation and/or use
FRONT AND REAR VIEWVUES
Type C USB port
FEATURES
Installation for CAT III overvoltage category
| Power supply | 120-240 V~ 50/60 Hz |
|---|---|
| Power consumption | 280 mA – 120 V~ |
170 mA – 240 V~
Output voltage| 5.0 V d.c. (± 5%) ES1
Max output load| 3.0 A
Output power| 15.0 W
Average efficiency in active mode| 85.40%
Efficiency with low load (10%)| 79.10%
Power with no load| 0.06 W
Protection degree| IP20
Operating temperature| 0 °C – +35 °C indoor use
Device in class II| 
Installation for CAT III overvoltage category
INSTALLATION RULES
Installation must be carried out by qualified persons in compliance with the
current regulations regarding the installation of electrical equipment in the
country where the products are installed. The device can be installed in a
flush mounting box or surface mounting box and completed with Eikon cover
plates in dust-free places, protected from accidental impacts and away from
heat sources.
IMPORTANT.
- An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream from the power supply.
- Install the device at a height of no more than 2 m.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces
of lead.
DEVICE DETAILS AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT FROM THE
PRODUCT DATA SHEET ON www.vimar.com
https://www.vimar.com/en/int/catalog/product/index/code/22292.CC.15
www.vimar.com
Viale Vicenza, 14
36063 Marostica VI – Italy
49401936A0 01 2311
Documents / Resources
|
VIMAR 22292.CC.15 Eikon USB Supply
Unit
[pdf] Instruction Manual
22292.CC.15, 49401936A0, 22292.CC.15 Eikon USB Supply Unit, 22292.CC.15, Eikon
USB Supply Unit, USB Supply Unit, Supply Unit, Unit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>