HAT WNSTE-E Dual Mount Instruction Manual

: October 30, 2023
: HAT

Table of Contents

HAT WNSTE-E Dual Mount
Product Information
Product Usage Instructions
Information
WARRANTY
PARTS LIST
Installation Instructions
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HAT WNSTE-E Dual Mount

Product Information

The Winston-E is a sit-stand workstation that comes with a freestanding base, utility tray, monitor tilter, left and right wings, worksurface or compact worksurface, worksurface plate, quick connect VESA plate, column cable clip, wing cable clip, and various screws and wrenches. The product has Human Active Technology and can be adjusted to different heights. The manufacturer offers a 5-year limited warranty that covers defects in materials and workmanship.

Product Usage Instructions

Ensure that you have received all the parts listed in the manual.
Assemble the freestanding base and attach the column to it.
Attach the left and right wings to the column using the M6 x 1 x 16mm FPhMS screws and the M4 x 12mm Phillips Pan Head Screw.
Attach the worksurface or compact work surface to the left and right wings using the M6 x 1 x 25mm FPhMS screws.
Attach the utility tray to the worksurface by aligning the tabs on the tray with the recessed areas on the worksurface plate. Slide the tray towards the column to secure it in place.
Attach the monitor tilter to the column using the tension adjustment screw and the 3/32 Allen wrench.
Attach the worksurface plate to the column using the Quick Connect VESA Plate and the 7/32 Allen wrench.
Secure cables using the column cable clip and wing cable clip.
Adjust the tension of the monitor tilter as needed.

Note: Failure to carefully follow assembly, safety, and operation instructions and warnings may result in bodily injury and/or property damage. The manufacturer may require proof of purchase before performing any repairs or replacing products during the warranty period. This warranty is non- transferable and applies only to the original purchaser.

WARNING: FAILURE TO CAREFULLY FOLLOW ASSEMBLY, SAFETY, AND OPERATION INSTRUCTIONS AND WARNINGS REGARDING THIS PRODUCT MAY RESULT IN BODILY INJURY AND/OR PROPERTY DAMAGE.

Information

Liability: The manufacturer does not accept warranty claims or liability claims for damages arising from improper use of Winston-E. For safe use, do not place any objects or body parts underneath the worksurface. Make sure no body parts, objects or furnishings are located above the Winston-E. When using Winston-E, make sure no hands, fingers or other body parts are near the lifting column or between the cross beam and worksurface. Winston-E must be set on a level, stable surface for safe use.

Additional Warning: Do not use Winston-E if it has a damaged cord or plug. Winston-E should not be carried by the cord. Pull on the plug, not the cord, to unplug Winston-E. Keep liquids away from Winston-E. Keep hair, loose clothing, fingers, and body parts away from openings and moving parts. Switch off power supply and remove main power supply plug before installation or troubleshooting. Ensure no cables or cords can get jammed or stripped when raising or lowering Winston-E. Ensure all wires are not entangled in the Winston-E and have enough length when the unit is raised to the desired height.

WINSTON-E IS NOT A TOY: Children should not use Winston-E. Do not crawl, lie, or move around the unit. Do not sit, kneel, or stand on the worksurface. Do not use Winston-E if you are distracted or are under the influence of medications that can cause diminished control. Winston-E is not a toy and should only be installed and used by someone familiar with and capable of adhering to the warnings and instructions.

WARRANTY

Winston-E includes a 5 year limited warranty. This limited warranty covers any defects in materials and workmanship of the product. This limited warranty may not cover problems, damage or injuries caused by misuse, accidents or abuse. The manufacturer may require proof of purchase before performing any repairs or replacing products during the warranty period. This warranty is non- transferable and applies only to the original purchaser.