Sealey TSP121L-6 Super Grip Knitted Gloves Latex Palm Instruction Manual
- June 20, 2024
- SEALEY
Table of Contents
SUPER GRIP KNITTED GLOVES LATEX
PALM- PACK OF 6 PAIRS – SIZES L/XL
MODEL NO: TSP121L/6 TSP121XL/6
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
INTRODUCTION
Latex coating with poly cotton lining gives superior grip in wet and dry conditions. Breathable open back. Enhanced tear resistance. CE Marked and conforms to BS EN 388:2016 2-1-3-1-X.
SAFETY
DO NOT use damaged or visibly soiled gloves
DO NOT touch your face while wearing gloves.
Wash hands with soap and water
for at least 20 seconds and dry thoroughly before putting gloves on and after
taking them off.
Wear properly fitting gloves
with a close fit around fingers and wrist to reduce risk of exposure.
SPECIFICATION
TSP121L/6 / TSP121XL/6
Conforms to specifications EN 388:2016 and EN 420: 2003+A1: 2009
Notified Body: 0075
Certificate Number: 0075/1022/162/10/19/3012
Carried out by C.T.C.
| Abrasion Resistance | 2 |
|---|---|
| Blade Cut Resistance | 1 |
| Tear Resistance | 3 |
| Puncture Resistance | 1 |
| Cut Resistance | X |
The numbers indicate the performance level of the glove.
1 = lowest 4 = highest 5 highest for blade cut resistance.
‘X’ indicates that the glove has not been submitted to the test or the test
method appears not to be suitable for the glove design or material.
APPLICATIONS
4.1. Latex coated with poly cotton lining for comfort, grip & protection. Ideal for tasks where superior grip, both wet and dry, is important.
MAINTENANCE
5.1. Store in a bag or case out of direct sunlight, away from chemicals and
abrasive substances, in a clean dust free environment.
5.2. Use original box/bag for storage and transportation.
OBSOLESCENCE
6.1. Store in original packaging, out of direct sunlight, away from chemicals
and abrasive substances and under ordinary temperature and humidity
conditions.
6.2. Like all protective products, the product life and level of service
depend on the type of use, care and maintenance applied.
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68
Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds,
Suffolk. IP32 7AR
01284 757500
[email protected]
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
TSP121L/6 TSP121XL/6 Issue 1 14/12/23