Smart-Tech 24HN10T2 HD LED TV Instructions Manual

Smart-Tech 24HN10T2 HD LED TV

For technical details, please visit “Specifications and Datasheet”

Instruction Manual for 3663

IMPORTANT: Please read this manual carefully before installing and operating the TV. Keep this manual handy for further reference.

Safety Information

• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating in the literature accompanying the appliance.
  • Warning: The lightning flashes with an arrowhead symbol within an equilateral triangle.is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

RISK OF ELECTRIC SHOCK

• DO NOT OPEN
• To reduce the risk of electric shock do not remove cover (or back).
• No user-serviceable parts inside. Refer servicing to qualified service personnel.
• If the TV has any changes or coarse adjustments, or electric shocks to be hurt, do not attempt to open a machine-maintenance, customer contact centers need overhaul.

Important Safety Precautions:

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install by the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at Plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments /accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used cautious when moving the cart/apparatus combination to avoid injury tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods.

Caution:

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• The mains plug is used as a disconnect device, the disconnect device shall remain readily operable.
• The socket-out shall be installed near the equipment and shall be easily accessible.
• This product should never be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the apparatus.
• Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
• Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
• Never place the TV, remote control, or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control, and batteries at all times.
• The USB terminal should be loaded with 0.5A under normal operation.
• These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions. unless you are qualified to do so.
• The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
• This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth
• The maximum using environment temperature is 45 degrees.
• The Maximum using altitude is 2000 meters

Installation

1. Insert the stand into the bottom of the LED TV body.

2. Insert the aerial cable into the RF socket.

3. Connect the power cord to a suitable wall socket and switch on

4. Open the battery compartment cover on the back side;

5. Insert two 1.5V batteries of AAA type with the correct polarity.

6. Close the battery compartment cover on the back side

7. Switch on the TV by pressing the power button on the side of the TV or on the remote control.

First Time Installation

1. TV will enter First Time Installation (or press MENU on the remote, select SETUP First Time Installation)
2. Follow the on-screen steps to set up language, country, and channel scan.

TV Buttons(One key):

Note: The key instructions are subject to below.

Display

• Hide key icon: When there is no button icon popping up, press the key, and the key icon will pop up like the picture shows above, the key icon will automatically turn off after 5 seconds of inactivity.
• Icon selection: Short press the button, move the loop to the right, and select the icon.
• Icon function selection: Long press the key to achieve the function of the selected icon.

Icon Description

• : Power off Icon: Corresponding to the “POWER” button of the remote.
• : Menu Icon : Corresponding to the “MENU” button of the remote.
• : Source Icon : Corresponding to the “SOURCE” button of the remote.
• : CH+ Icon: Corresponding to the “CH+” button of the remote.
• :CH-Icon: Corresponding to the “CH-” button of the remote.
• : Volume+ Icon: Corresponding to the “VOL+” button of the remote.
• : Volume- Icon: Corresponding to the “VOL-” button of the remote.

TV Buttons (Seven Keys)

• Turn ON/OFF Power.
  SOURCE : External Signal Input Selection.
  MENU / OK:

• • MENU Item Selection.
    • Display Main MENU And Confirm

• CH+/-: Selecting Channel.
  VOL+/-: Adjusting Volume.

Remote Controller

• POWER
  Set your TV to power on or standby mode.

• MUTE
  Press to mute the sound. Press again or press VOL+ to unmute.

• NUMBER BUTTONS
  Press 0-9 to select a TV channel directly when you are watching TV. The channel changes after 2 seconds. Applicable for entering page numbers in teletext mode and so on.

• ATV/DTV
  Switch between Analog and Digital TV.

• MENU
  Allows you to navigate the on-screen menus.

• SOURCE
  Open the main menu, and press to list the sources.

• THUMBSTICK ( /ENTRE)
  Allows you to navigate the on-screen menus and adjust the system settings to your preference.

• DISPLAY
  Press to display the source and channel”s information.

• EXIT
  Exist from the menu or sub-menu and cancel the function in progress (if applicable).

• TV/RADIO: When watching the channel, allows you to switch between TV and Radio modes.

• GUIDE: Launches the EPG (Electronic Program Guide)

• : Fast reverse in PVR or Media Player mode.

• : play on PVR or Media Player mode.

• CANCEL: When a page is selected in the mode of text, it may take some time before it becomes available, pressing the CANCEL key will return to the TV mode. When the required page is found, the page number will appear at the top of the TV picture, press the CANCEL key to return to the mode of text for you to browse this page. M-4: Previous chapter in PVR or Media Player mode

• INDEX: Request the Index page in Teletext mode.

• : Exit the playing function in PVR or Media Player mode.

• SIZE: Change the size of the display in Teletext mode.

• REVEAL: Reveal or Hide the hidden words.

• COLOR BUTTONS: Teletex switch of the analog parts, the items selection in the menu of the digital parts, and the practice of the MHEG5 in the DVB menu.

• CH+/CH-: Press to scan through channels.

• FAV: press to open the favorite list.  then you can select your favorite channel.

• AS PECT: Select picture scale.

• : fast forward to PVR or Media Player mode.

• SUB. PG: Press to access the subpage.

• : Next chapter in PVR or Media Player mode.

• SUBTITLE: To show and set the language of the current DTV. HOLD: HOLD On or Off for the current page display.

• TEXT: Switch the teletext on and off.

• REC LIST: Show the recorded list.

• REC: Record begins in PVR mode.

Battery Installation

• Remove the battery compartment lid on the rear of the remote control by sliding the lid down, and then off. Put two AAA batteries inside the battery compartment with their+ and – end s aligned as indicated. Do not mix old and new batteries or different types of batteries.
• Slide the lid until you hear it click into place.

Using the Remote Control:

• Unless stated, otherwise, the remote control can operate all the features of the TV.
• Always point the remote control directly at the remote sensor in front of the TV.

Based on legislative decree no. 49 dated 14th March 2014

“Execution of Directive 2012/19/UE about electrical and electronic equipment waste (RAEE)”

This marking indicates that this product should not be disposed of with other household wastes, but it should be disposed of separately from other wastes. Therefore, the user should bring the product with all essential components to recycling centers for electrical and electronic wastes, or return it to the retailer before buying a new product as an equivalent type, in the ratio of 1 to 1, or 1 to O for products that have larger side lesser of 25cm. Correct disposal of your old appliance will help to prevent potential damage to the environment and human health and support materials recycling. The unlawful disposal of the product should involve users’ administrative sanctions based on Legislative Decree No. 49 dated 14th March 2014.

Correct disposal of the batteries in this product

(Applicable in countries with separate collection systems)

This marking on battery, manual, or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

CAUTION: To prevent possible hearing damage, do not listen at high volume levels for long periods.

Environmental Considerations

• Operating Temperature: 5 °C -35°C (41°F-95° F)
• Operating Humidity: 20% -75%, non-condensing
• Storage Temperature: -15 °C -45°C (5°F-113° F)
• Storage Humidity: 10% -90%, non-condensing

Warning

• Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death.
• Many injuries, particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television set.
• Only use furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases).without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture,
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.
• If your existing television set is being retained and relocated, the same considerations as above should be applied.
• Wall-mounted screw:22-24inch M4, 28-70inch M6, 75inch M8
  • Note: don’t hang at an angle to avoid the risk of falling off.
• Wall-mounted screw: 22-24inch M4, 28-70inch M6, 75inch M8
  • Note: don’t hang at an angle to avoid the risk of falling off.

Certifications and Contact Information

• HE Advance™
• HOMI®
• HIGH-DEFINITION MULTIMEDIA INTERFACE
• NC
• MPEG 4
• Dolby Audio
  • Manufactured under license from Dolby Laboratories.
  • Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
• Express LUCK Europe Electric Kft
  • Leshegy út 2. 2310 Szigetszentmiklós, HUNGARY
  • E-mail: [email protected]
  • Website: http://www.smarttech-tv.com
• Made in China
• Covered by patents at patentlist.accessadvance.com

Frequently Asked Questions

What safety precautions should I follow when using the Smart-Tech 24HN10T2 HD LED TV?

Some important safety precautions include keeping the TV away from water, not blocking ventilation openings, avoiding heat sources, and not opening the TV's cover. Refer to the provided safety information for more details.

How do I install the Smart-Tech 24HN10T2 TV stand?

To install the TV stand, insert it into the bottom of the LED TV body. Ensure it is securely attached.

What type of batteries does the remote control use, and how do I install them?

The remote control uses two AAA-type batteries. To install them, remove the battery compartment lid on the rear of the remote control, insert the batteries with the correct polarity, and slide the lid back until it clicks into place.

What functions can I control with the remote control?

The remote control can operate various TV functions, including power, volume adjustment, channel selection, menu navigation, and more. Refer to the provided information for a detailed list of remote control functions.

How do I set up the Smart-Tech 24HN10T2 TV for the first time?

To set up the TV for the first time, follow the on-screen steps, which may include selecting language, country, and channel scanning. You can also access the setup menu by pressing MENU on the remote.

What are the icons on the Smart-Tech 24HN10T2 TV's display and how do I use them?

The icons on the TV's display correspond to various functions such as power off, menu, source selection, channel change, and volume adjustment. You can use the remote control to interact with these icons. Long-pressing some icons may activate additional functions.

How can I dispose of Smart-Tech 24HN10T2 TV and its batteries responsibly?

To dispose of the TV responsibly, follow local regulations for electronic waste disposal. Additionally, recycle the batteries through your local battery return system to prevent harm to the environment and human health.

What are the environmental considerations for operating and storing the Smart- Tech 24HN10T2 TV?

The TV has specific operating temperature and humidity ranges. Avoid placing it in unstable locations to prevent accidents. Ensure that furniture and stands can safely support the TV's weight.

Are there any certifications or contact information for Smart-Tech 24HN10T2 TV?

The TV may have certifications like HE Advance™, HOMI®, HIGH-DEFINITION MULTIMEDIA INTERFACE, MPEG 4, and Dolby Audio. For contact information and inquiries, you can refer to the provided details, including the manufacturer's website and email address.

How do I switch between Analog and Digital TV modes?

You can switch between Analog and Digital TV modes by pressing the ATV/DTV button on the remote control.

What should I do if my provided plug doesn't fit into my outlet?

If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet to ensure proper electrical compatibility.

Can I mount Smart-Tech 24HN10T2 TV on the wall or ceiling?

Yes, you can mount the TV on the wall or ceiling, but it should be done following the manufacturer's recommendations and using appropriate mounting hardware. Refer to the provided information for wall-mounted screw specifications.

Download The PDF link:Smart-Tech 24HN10T2 HD LED TV Instructions Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>