SMART TECH BA-01 Bluetooth Alarm User Manual
- June 15, 2024
- SMART TECH
Table of Contents
Instruction
Please kindly read the instruction carefully at the first time and keep the user manual for future reference.
Standard Packaging List
-
Instruction*1.
-
Alarm*1
-
USB*1
-
Alarm pin
-
Indicator light
-
Type-c port
-
LED Light
-
Light Button
Model: BA-01 Materials: ABS Alarm time: 100min
Size: 654542.5mm Battery: 130mAh Light time: 2.5h
Weight: 53g Charging time: 40min Standby: >12 months
HOW TO USE:
1. Pull out the alarm pin to activate the alarm, red and blue light flash; insert the pin, both off
2. Press the light button, bright light; press again, strobe;
press it the third times, red and blue light flash;
press it the fourth times or press the light button twice quickly, light off.
3.APP Download
App name to suit this device is “Kindelf”
(1) For iOS user, search “Kindelf” from APP Store then download and install
it.
(2) For Android user, search “Kindelf” from Google play then download and
install it. Users in China mainland can download it from My APP or other
Mobile App market. All screenshots used in user manual are from iPhone X.
Allowing system location, microphone and camera all accessible, Android users
are subject to practice, phone bluetooth opened before using.
4. Bluetooth function:
(1)Startup:
Press and hold the side button for 3 seconds, beep sound and light flash, the
Bluetooth anti-lost function is turned on.
Find items:
After connecting to the mobile phone, when click the alarm button in APP,
alarm sound and the indicator light flash.
The mobile phone disconnects Bluetooth: alarm sound and the indicator light
flash.
Turn off Bluetooth: Press and hold the light button, a beep sound, the
indicator light will flash and Bluetooth will turn off.
Note: When the Bluetooth function is turned on and the mobile phone is not connected, when the side button is pressed, there will be beep sound.
5. Automatically enter the sleep function without operation.
(2) Device
Open APP into the “Device” interface as below.
Click “ ” below graphic signs appeared
A. Click “Unconnected”, as graphic sign.
B. Appear “Connecting”, as graphic sign.
C. After connected as graphic sign.
D: Click “Click alarm”, as graphic sign. The device starts to make sound of “DiDi” all the time and will stop “DiDi” when clicking “Stop alarm” again. Double click of bluetooth device button quickly, an alarm ring pre-set up will be happened and it will stop once click of that button again. Click “Setting”, as graphic sign.
A. Click graphic signs to change the device picture as picture.
B. Change the device name as graphic signs
C. “Alarm when Bluetooth Disconnected” default in closed can be opened by manual, otherwise smart phone won’t alarm when it disconnects with bluetooth anti-lost device, recommend to open as graphic signs.
D. Click on “Select Ringtone” the right side to enter the ringtone interface, select the ringtone type as graphic sign.
(3) Camera
With camera function, single click on the device to have fun of selfie, and
switch between front and rear camera freely.
(4) Location
The device will work with positioning function when it gets disconnected with
smart phone, which will keep the exact positioning location when disconnecting
and is able to find the history of last seen position. Turning on GPS and keep
smart phone connected with internet, otherwise map not updated.
(5) Settings
WIFI Do Not Disturb: Default in closed, but in a Wifi covering area when
opened to get connected with a smart phone, the smart phone won’t ring when
disconnecting.
Silent Period: Default in opened, set up period from 23:00PM to 07:00AM next
day, non-interference can be set up closed or reset up the time period.
Recording: Get into below interface to use voice recorder, single click on
button to start voice recording and click the button again to stop and
recorded file will saved in wav format.
A. Default in closed, click on the right to open.
B. Default in opened, click on the right to close or reset the Silent period.
C. Click on the right side to enter the recording interface.
D. Software Version.
Enter the recording interface, click the button to start recording, click the
button again, stop recording, and automatically generate a recording document.
3. Product specification
(1). Supported IOS and Android system: Recommended iOS version 11 and above;
The Android system needs 8.0 or above, and the phone needs to support the
Bluetooth 4.0 standard.
(2). Support Bluetooth Low Energy (BLE), support two-way alarm.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules, These limits are
desighed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harm/ful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation, lf this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from.
Consult the dealer or an experlenced radio/TV technician for help.
Caution: Any changes or modifications to this device hot explicitly approved
by manufacturer could void your authority to operate this equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation. The device has been evaluated to meet general RF exposure
requlrement. The device can be used in portable exposure condition without
restriction.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
4.Help
(1) Why can’t the anti-lost device connect to smart devices (Mobile phones,
tablets, etc)?
A. Confirm if the smart device is turning on Bluetooth.
B. Determine if the battery has power? If it is a button battery, pull out the
battery, then load it, and connect the anti-lost device to the APP again.
C. Restart the smart device or restart the app.
(2) Why does the device alarm frequently? Due to the differences in the materials of the products themselves, individual anti-lost devices may have frequent alarms, The following steps can be set to further improve the user experience.
A. Disconnect, no mobile phone alarm, “Alarm when Bluetooth Disconnected” in
the “Setting” option in Device (default in closed), this option does not
affect the function of the anti lost device to find the phone.
B. In the “Settings”, there is “WIFI Do Not Disturb” option to turn on
(default in closed), the mobile phone is disconnected from the anti-lost
device in this area, and the mobile phone will not sound an alarm.
C. There is a “Silent Period” option in “Settings” (Default in opened), the
default time period is 23: 00 -07 : 00, and the time period can be changed
according to the user’s habits.
(3) The Working distance of the device? The anti-lost device is a personal communication consumer product, it belongs to the Class 2 standard, and the general distance is 12 – 30 meters (without any barriers)4)Why is the device alarming frequently at home ?Due to the poor penetration of the Bluetooth standard to the spacers, if there are more load-bearing walls in the actual living room, the anti-lost device will be frequently alarmed. It is recommended that the user can refer to the help point 2to optimize the experience. If you are sensitive to this requirement, it is recommended to consider it, Please be cautious to purchase such products.
Key points: Some of the information in this manual is based on network information. If there is any dispute or objection to the citation, please refer to the professional information. This description is only for how the APP is used, and does not bear the losses or legal liabilities caused by other misunderstandings.