SMART TECH FSE-410 Electric Height Adjustable Mobile Stand Instruction Manual

June 16, 2024
SMART TECH

SMART TECH FSE-410 Electric Height Adjustable Mobile Stand Instruction Manual

Instructions

**Lower floor stand


**

Note: No need to unlock FSE-400

Power off & unplug
Power off & unplug

Lock cabinet & remove keys

Loosen display locks
Loosen display locks

Unmounted display

Note: Ensure that the SMART display is posiƟoned securely on the floor in an upright posiƟon, with proper back support.
Unmounted display

Lay the floor stand on its back
Lay the floor stand on its back

Warning Icon Use support and protecƟon when laying the unit on its side.

Remove the wheelbase
Remove the wheelbase

Record the Serial Numbers of the: floor stand, exisƟng wheelbase, and replacement wheelbase in the provided data sheet (refer to end of this document).
Record the Serial Numbers

Remove casters from old wheelbase and mount on new wheelbase
Remove casters

Install the new wheelbase
Install the new wheelbase

Return the floor stand to its upright posiƟon
Return the floor stand

Warning Icon Important: Securely engage the wheel locks before posiƟoning the stand upright.

Mount display
Mount display

Secure display locks

Secure the display to the wall plate by tightening the locking screws with a Phillips No. 2 screw driver until the screws contact the wall plate.
Secure display locks

Plug & power ON the display and floor stand

Perform final checks

Warning Icon After stand assembly, calibrate before use.

Press the and buttons in sequence.

Ensure the stand is at the lowest position.

Press and hold the control switch for 5 seconds.

The stand moves up and down 3/8″ (1 cm).

The stand is ready for use or has been reset.

Note: No need to calibrate FSE-400.

FSE-410/400 Asset informaƟon registraƟon form

Visit our website for a downloadable version of this form:
Important informaƟon for FSE-400 and FSE-410 models – SMART electric height-adjustable mobile stand (smarƩech.com)

No.| (1)FSE-410/400 SN| (2)Old wheel-base SN| (3)New wheel- base SN| Remarks
---|---|---|---|---
1| | | |
2| | | |
3| | | |
4| | | |
5| | | |
6| | | |
7| | | |
8| | | |
9| | | |
10| | | |
11| | | |
12| | | |
13| | | |
14| | | |
15| | | |
16| | | |
17| | | |
18| | | |
19| | | |
20| | | |
21| | | |
22| | | |
23| | | |
24| | | |
25| | | |
26| | | |
27| | | |
28| | | |
29| | | |
30| | | |
31| | | |

SMART TECH Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SMART TECH User Manuals

Related Manuals