Maraawa B0CRYQ672Y Blood Pressure Monitors for Home Use Instruction Manual
- June 20, 2024
- Maraawa
Table of Contents
- Maraawa B0CRYQ672Y Blood Pressure Monitors for Home Use
- Product Information
- Product Usage Instructions
- Operation Tutorial on M araawa BP Monitor
- FAQ
- Power on
- Set the date and time
- Switch between user 1 and user 2
- Start blood pressure measurement
- Check out history memories
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Maraawa B0CRYQ672Y Blood Pressure Monitors for Home Use
Product Information
Specifications
- Brand: M araawa
- Model: P
- Memory Capacity: Up to 99 memories per user
- Display: M R and AVG for average display
- Power Source: Not specified
Product Usage Instructions
Power On
To power on the device, follow the manufacturer’s instructions provided.
Set the Date and Time:
- In shutdown mode, press and hold SET for 2-3 seconds to enter date and time setting.
- Press MEM to set the year and press SET to confirm.
- Press MEM to set the date and press SET to confirm.
- Press MEM to choose between the 12/24-hour system and press SET to confirm.
- Press MEM to set the hour and press SET to confirm.
- Press MEM to set the minute and press SET to confirm.
Switch Between User 1 and User 2
In shutdown mode, press SET to switch between user 1 and user 2.
Start Blood Pressure Measurement
Follow the specific instructions provided in the manual to start blood
pressure measurement for yourself.
Check Out History Memories
- After choosing user 1/2, press MEM to read memories.
- M R and AVG display together to show the average of the 3 latest memories.
- Press and hold MEM to get a quick glance at history memories.
- Press MEM once to see each memory respectively.
Delete History Memories
Press and hold MEM and START/STOP together for 3-5 seconds to delete all
memories. Note that all memories of both users will be deleted once this
action is performed.
FAQ
How many memories can the device save for each user?
The device can save up to 99 memories for each user.
Operation Tutorial on M araawa BP Monitor
Seller Support
If you have any product issues, pls feel free to contact us at
sales001@swfoeraudio.com
FAQ
Why do I get different measure results each time ?
Individual blood pressure varies multiple times a day. The highest value usually appears in the daytime and the lowest at midnight. It is normal for anyone to receive different values at each measurement. Thus, it is suggested that you take measurements at the same time each day and take the average value of a week for reference
How to change the unit of measure?
In shutdown mode, press and hold START for 15 seconds to switch the unit of measure from mmHg (millimeters of mercury) to kPa (kilopascals), then press again START to save the setting.
Power on
- Two ways to charge the device: Type-C Cable or 4×AA dry batteries.(Both Included)
- How to install batteries: direct the battery bottom to the spring parts to install 4 batteries into the slots.
Set the date and time
- In shutdown mode, press and hold SET for 2-3 seconds to enter date and time setting.
- Press MEM to set the year and press SET to confirm.
- Press MEM to set the date and press SET to confirm.
- Press MEM to choose 12/24 hour system and press SET to confirm.
- Press MEM to set the hour and press SET to confirm.
- Press MEM to set the minute and press SET to confirm.
Switch between user 1 and user 2
In shutdown mode, press SET to switch between user 1 and user 2.
Start blood pressure measurement
After choosing user 1 or 2, you can start to measure your blood pressure.
Attention before bp measurement
-
Avoid eating, drinking alcohol, smoking, exercising or bathing for 30 mins before taking bp measurement.
-
Choose a quiet place, sit on a chair and calm yourself down.
-
Keep your feet flat on the floor. Wrap your arm with the cuff and adjust it to the same level as your heart.
Place your hand on table with palm up and press START button to take bp measurement. -
Do not talk or move during measurement.
-
Get your results in a minute. lf you want to take another measurement, pls wait 2-3 minutes to allow blood flows inarteries to return to the status prior to measurement.
Check out history memories
After choosing user 1/2, press MEM to read memories. MR and AVG display
together to show average of 3 latest memories.
Press and Hold MEM to get a quick glance of history memories.
Press MEM Once to see each memory respectively.
Delete history memories
Press and Hold MEM and START/STOP together for 3-5 seconds and all memories
will be deleted.
NOTE: It can save up to 99 memories for each user. Once you delete the memories, all the memories of both users will be deleted.