KERBL 10812 Smart Camera HD Instruction Manual

: June 17, 2024
: KERBL

Table of Contents

KERBL 10812 Smart Camera HD
Product Safety
- Care and maintenance
General information regarding safety and warning instructions
Main features
Technical data
Use simply with smartphone (without wireless router)
Main features
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KERBL 10812 Smart Camera HD

Introduction
Please read these instructions carefully in their entirety before using the product, and keep them handy for future reference.
Thank you for your interest in our product and for ordering the Smart-Cam. We are certain that you will value the quality and features of this product.

Note
This product can interfere with other wireless devices that use the 2.4 GHz ISM band. Please turn off these devices to avoid interference.

Product Safety

This product transmits electromagnetic waves just like other wireless products. Its signal power, however, is less than other wireless devices, for example, mobile phones. During operation, SmartCam meets the safety standards for radio frequencies and the recommended indices.

Restrictions

Do NOT use this product to violate the privacy rights of others. Monitoring the activities of other people without their consent is unlawful. This product was not designed or manufactured for this purpose.
Do NOT place this product in proximity to medical devices. Radio waves can cause the malfunction of electronic medical devices.
This product should be kept at least 30 cm away from all pacemakers. Radio waves can interfere with pacemakers.
Do NOT use this product for unlawful activities. The user must ensure that the camera is only used in accordance with the law.

Care and maintenance

Make sure that the camera and its power supply has sufficient ventilation.
Do not shake, hit or allow the product to fall to the ground.
Make sure that the camera remains dry and dust-free, and is not exposed to direct sunlight.
Do not place this product in proximity to magnetic objects.
Do not place the product in locations that have constant temperatu-re or humidity fluctuations.
Keep the product away from heat sources.
Do not use this product in proximity to aggressive chemicals.
Do not use this product in proximity to water.
Do not place this product in rooms that are surrounded by metal. The surrounding metal can shield electromagnetic waves so that no signal is received.
Please note the local environmental protection regulations of your area.
Please turn the device off when not in use.
Do not take the product apart and do not attempt to repair it. This can damage the product.

General information regarding safety and warning instructions

Danger! Imminent danger which leads to serious physical injury or death.
Lithium-ion batteries (Li-ion) pose a risk of explosion and fire. All safe-ty instructions must be observed in order to reduce the risk and to prevent misuse.

The unit contains a Li-ion battery.
Fire hazard.
The Li-ion battery cannot be replaced. Do not open the product!
Only connect the unit to a supply network with a protective earth conductor.
Only use the supplied mains adapter and cable to charge the unit/battery.
Check the unit, mains adapter and charging cable for damage before use.
Only operate the unit if it is undamaged.
Do not operate the unit in an explosive atmosphere.
Do not subject the unit to mechanical shocks, as this could damage the battery.
Do not allow children to play with the unit.
Protect the unit from heat (> +60 °C ), excessive sunlight and fire, as there is a risk of explosion.
Store the unit at room temperature. Do not store the unit near heat sources or heaters.
Keep the unit dry.
Do not open faulty units. Faulty units may only be repaired by the manufacturer.
Do not dispose of the unit with the Li-ion battery in household waste, fire or water. Observe local disposal regulations.

Caution! Risk of physical injury to people and animals and material damage if used incorrectly!

Children and infirm individuals must only use the device under supervision.
Note the safety and maintenance instructions.
The unit must be used exclusively in accordance with intended use and in a technically safe condition! The operational safety of the unit is only guaranteed if it is used for its intended purpose. Failure to comply with the individually listed points in the operating instruc-tions can result in physical injury or material damage for which the manufacturer assumes no liability.
Keep all safety and danger notices on/at the unit complete and always in a legible condition.
The maintenance intervals specified in these operating instructions must be observed.
Only use genuine spare parts.

Main features

AP mode
In AP mode, the camera communicates directly with e.g. Smartphones. In this case, the smart phone serves as a monitor and therefore replaces classic radio monitors to watch animals in the trailer while driving.
3GPP mobile surveillance
The camera allows you to view images on your mobile phone as a live video stream. It supports the telecommunication standard for the 3GPP streaming format. All 3G-capable mobile devices and most 2G mobile phones that support the 3GPP standard are compatible. This means that the images can be viewed via your mobile phone’s browser.
Simultaneous high-speed MPEG-4 and Motion JPEG
The camera enables the simultaneous live streaming of MPEG-4 and Motion JPEG. The camera has H.264/MPEG4 compression that compresses the video to make the transmission faster and more efficient. The H.264/MPEG4 and MJPEG image can be transmitted at 30 frames per second.
Simultaneous HTTP and RTSP streaming
The camera supports the HTTP and RTSP/RTP/RTCP protocol and sup-plies several HTTP and RTSP streams simultaneously.
Snapshot and record function
You can take a snapshot from the images sent to your PC by the camera and then save the image in JPG or BMP format. In addition, you can also record the video and audio stream sent from the camera to your PC and save it in ASF format.
OSD function
The OSD function (on screen display) can show the system name, date and time, and user-defined info on the screen.
Authentication
You must enter your user ID and password in the authentication window. The password prevents unregistered users access to your camera. Users can select between the basic authentication method or the direct access authentication method.
Infrared night vision
The camera uses infrared LEDs. When the environment is dark, the LEDs activate automatically via a light sensor. The video switches from colour to black & white. The range is approx. 5 m.
Adapter
When using the power adapter, make sure that the nominal voltage matches that of the device to avoid damage due to incorrect use of the power supply.

Technical data

Function types: AP
Transmission standard: Wi-Fi (IEEE 802.11b/g/n)
Transmission frequency: 2.4 GHz
Modulations: OFDM/DBPSK/DQPSK/CCK
Transmission range: 50 m (without obstacles)
Transmission strength: 17 dBm (max.)
Antenna: 2 dBI / External connecting

Video

Image sensor: 1/4“ CMOS
Screen resolution: HD (1280×720 pixels) /VGA (640×480 pixels)
Image compression: H.264 / MJPEG
Frame rate: 25 FpS (VGA), 15 FpS (720p)
Viewing angle: 100 °
Minimum luminosity: 2.0 Lux/F2.0, 0 Lux (IR ON)

Power supply

Input voltage: DC +5 V
Battery: Lithium polymer battery, 3.7 V, 3000 mAh
Power consumption: 330 mA or 550 mA (IR ON)
Current consumption: 550 mA
Charging time: up to 5 hours
Operating time: 8 hours (IR OFF) / 5 hours (IR ON)

Night vision

Number of LEDs: 14
Luminous efficacy: 5 m / 60 °

Miscellaneous

Protection type: IP 66
Magnetic force: 8 kg (vertical)
Weight: 360 g
Dimensions: 85.5 x 59.5 x 50 mm
Accessories: mains adapter, antenna, user manual
Storage temperature: -40 °C ~ 85 °C /-40 °F ~ 185 °F
Operating temperature: -10 °C ~ 50 °C /14 °F ~ 122 °F
Ambient humidity during operation: 0 ~ 90 %

Warranty card
Based on our General Terms and Conditions of Business, we offer a 1 YEAR WARRANTY for this device covering damage caused by material or manufacturing defects. This warranty begins on the date of purchase.

The warranty does not cover:

Damaged caused by natural wear and tear (wear parts, sliding parts), excessive strain and incorrect use (non-compliance with operating instructions).
Damage caused by force majeure or sustained during transport.
Damage to rubber parts, e.g. on connecting lines. Warranty repairs are only carried out by the manufacturing plant or an authorised contracted workshop. The manufac-turer reserves the right to reject any warranty claims in the event of non-compliance.

The device must for this purpose be returned to the point of sale, at the risk of the device owner, complete, packaged and with sufficient postage, including the original invoice and the warranty card. (address see dealer stamp). Please provide as much information as possible on the nature of the problem. Costs incurred as a result of unjustified defect claims will be invoiced to the device’s owner.

CE-/UKCA-conformity declaration
Albert KERBL GmbH hereby declares that the product/device described in these instructions complies with the fundamental requirements and other relevant stipulations and regulations. The CE-/UCKA-mark confirms compliance with the Directives of the European Union or the releant UK legislation.

Electrical waste
It is up to the operator to dispose of the SmartCam responsibly in ac-cordance with local regulations. Consult the relevant regulations for your country. The device must not be disposed of in household waste. Under the terms of the EU Directive on the disposal of old electrical and electronic equipment, the device can be taken to local authority-run refuse sites or recycling plants free of charge, or returned to dealers who offer a returns service. Correct dis-posal protects the environment and prevents any possible harmful impacts on humans and the environment.

Use simply with smartphone (without wireless router)

Note : Please note that the user interface depending on the operating system and version of the application from the images shown can be different.

Download „UCCAM“ app to smartphone. (Google play for Android phone, Apple store for iPhone)
Power on the Wifi camera by press power button on the back of camera, Green light will be on.
Chose the Wifi named „IPCAM_xxx“ on smartphone wifi setting
Enter Wifi password: 88888888
Run „UCCAM“ app on smartphone
Click camera icon to add the camera as above
Search camera by click quickly add „LAN Search“ as below
Camera will display with UID code. The camera with bright blue point and Wifi signal icon show that the camera has connected to your smartphone.
Then click the camera icon which you want to see, you will see the below interface:
Just click „save” ( no password) and you will see the video from camera

Main features

Picture adjustment:
Image can be Reversed by click the icon and choose check box „Mirror”:
Use this function to exchange the left and right of the image when you put your camera facing to the tail of your Car/Truck/RV so you can see the video as normal direction. Video can also upset down by choose check box „Flip”: Exchange the Up side and Down side.

You can take picture by click

You can record video by click and store in smart phone SD card.

Choose video quality:
You can change the video quality by choose your prefer quality level by click icon

High definition: 1280×720 resolution
Standard definition : VGA 640×480 resolution
Fluency : keep the video steam faster and fluent (less delay)

Video picture recorder Play

Review and play the picture and video you have taken and stored in SD card of your smart phone. Click on „Gallery“ symbol and you will see the files list( video and picture).
Click the files you want to see so you can see the video or photo. You can share these video/photo to your friends on Facebook/Twitter.

User name and right setting
You can set the user name of the account to manage the camera, different user can have different rights to control the camera, alias of the camera could also be set.
Go under „Settings“ to „User Settings“.

Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach, Germany
Tel. +49 8086 933 – 100
Fax +49 8086 933 – 500
info@kerbl.com
www.kerbl.com

Kerbl Austria Handels GmbH
Wirtschaftspark 1
9130 Poggersdorf
Tel.: +43 4224 81555 – 0
Fax: +43 4224 81555 – 629
order@kerbl-austria.at
www.kerbl-austria.at

Kerbl France Sarl
3 rue Henri Rouby, B.P 46 Soultz 68501 Guebwiller Cedex, France Tel. : +33 3 89 62 15 00
Fax: +33 3 89 83 04 46
info@kerbl-france.com
www.kerbl-france.com

Kerbl UK Ltd
8 Lands End Way Oakham, Rutland LE15 6RF UK
Phone: +44 01572 722558
Fax: +44 01572 757614
enquiries@kerbl.co.uk
www.kerbl.co.uk