Shape Products F57C9B0F Window Well Cover Installation Guide
- June 15, 2024
- SHAPE PRODUCTS
Table of Contents
Shape Products F57C9B0F Window Well Cover
Specifications
- Product: Window Well Cover
- Manufacturer: Shape Products
Product Usage Instructions
Spring Clip Installation
- Refer to Figure A for the placement of the spring clips.
- Use the necessary tools to attach the spring clips securely to the cover.
Installation Process
- Refer to Figures B, C, D, and E for the installation process.
- Place the cover over the window well ensuring a proper fit.
- Secure the cover in place using the installed spring clips.
Video Instructions
- If you prefer visual guidance, visit our website for video instructions on how to install the window well cover correctly.
- For warranty information, visit our website at shapeproducts.com
FAQ
Q: How do I clean the window well cover?
A: To clean the window well cover, use a mild detergent and water solution. Gently scrub the cover and rinse thoroughly with clean water. Avoid using harsh chemicals or abrasive materials that may damage the cover.
What You Need
- Tension Spring Clips
- 3/16” Bolts
- 3/16” Cap Nuts
Installation
- Place the window well cover over the window and push it tight against the exterior of the house. (FIGURE A)
- Center the cover on your well and mark the locations where the clips will attach. (FIGURE B)
- Remove the cover from your well and drill a 3/16” hole at each marked location. (FIGURE C)
- Mount the clips to your cover using the provided cap nuts and bolts provided and tighten the screw until you’ve reached your desired tension. (FIGURE D)
- Snap the window well cover onto the rim of the window. (FIGURE E)
- For warranty information, visit our website shapeproducts.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>