SIMPLEX L8146B Mechanical Pushbutton Mortise Lever Set Instruction Manual
- June 21, 2024
- Simplex
Table of Contents
SIMPLEX L8146B Mechanical Pushbutton Mortise Lever Set
Product Information
Specifications:
- Product Name: Pushbutton Lock
- Model: 8100 series
- Handedness: Factory handed and cannot be changed in the field
Product Usage Instructions
Installation Instructions:
- Step 1: Marking the Door
- Begin by marking the door according to the provided measurements.
- Step 2: Drilling the Holes
- Drill the necessary holes as indicated in the manual using the specified drill bit sizes.
- Step 3: Installing the Latch
- Mount and secure the latch onto the door frame following the provided instructions.
- Step 4: Installing the Lock
- Install the lock mechanism into the prepared holes on the door.
- Step 5: Installing the Drive Sleeve and Reinforcing Plate
- Attach the drive sleeve and reinforcing plate as directed in the manual.
- Step 6: Testing the Operation of the Lock
- Test the lock to ensure it functions correctly before proceeding.
- Step 7: Installing the Feature Set Assemblies
- Install any additional feature set assemblies required for your specific needs.
- Step 8: Installing the Inside Trim Plate
- Attach the inside trim plate securely to complete the installation.
- Step 9: Installing the Inside Lever
- Mount the inside lever according to the provided guidelines.
- Step 10: Installing the Strike
- Securely install the strike plate to ensure proper locking.
- Step 11: Installing the Key Override Cylinder
- If applicable, install the key override cylinder following the designated steps.
- Step 12: Changing the Combination
- Follow the instructions to change or set a new combination for the lock.
- Step 13: Using the Passage Function
- Learn how to use the passage function for convenience when needed.
- Step 14: Using the Lockout Function
- Understand and utilize the lockout function as required.
- Step 15: Adjusting the Lock
- Make any necessary adjustments to ensure optimal performance of the lock.
- Step 16: Resetting an Unknown Combination
- If you forget the combination, follow the steps to reset it safely.
- Step 17: Troubleshooting
- If you encounter any issues, refer to the troubleshooting section for guidance.
Frequently Asked Questions
- Q: Can I change the handedness of the lock after factory settings?
- A: No, the 8100 series locks are handed at the factory and cannot be changed in the field. Ensure correct installation based on factory settings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>