Simplex Plus Metal Detector User Guide
- June 9, 2024
- Simplex
Table of Contents
Simplex Plus Metal Detector
OVERVIEW
SETTINGS
Volume: (4 levels, change using + and -).
Ground Balance: Pump the coil up and down while pressing the
Pinpoint/Confirm Button to ground balance automatically.
Iron Volume: Adjusts or turns off the volume of the low iron tone (3
levels, change using + and -).
Threshold: In the All Metal mode, the threshold setting for each
sensitivity level is optimized to provide the best performance on different
terrains. (Adjust between -50 +50 using + and -)
Notch Discrimination: Eliminate unwanted metals from detection such as
trash. Each box represents a group of 5 IDs Any combination of these boxes can
be rejected or accepted.
Automatic:
- Swing the search coil over the metal you want to eliminate. The box that represents the group of IDs for that metal will be highlighted in black.
- Press the confirm button.
Manual:
- An X and a check mark will appear on screen along with a small arrow cursor underneath the ID bar at the top of the screen.
- Move the arrow cursor using the plus (+) and minus (-) buttons and select the box that includes the ID you want to eliminate.
- Press the confirm button. The box will be highlighted in black.
Frequency Shift: Eliminates EMI (3 levels, change using + and -).
Wireless: 0=Off / Channels 1-5 (change using + and -).
Vibration: On/Off (change using + and -).
Brightness: Adjusts the LCD and keypad backlight. 0=Off / 1-4 / A1-A4=
Auto (lights up only for a short period of time when a target is detected or
while navigating the menu and then it goes off).
LED Flashlight: On/Off (change using + and -).
Just turn your detector on, ground balance if you need to and start swinging
your coil. Happy metal detecting with the SIMPLEX+!
For more details, please read the user manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>