Huajue H13 Wireless Bluetooth Headset Instruction Manual
- June 17, 2024
- Huajue
Table of Contents
Huajue H13 Wireless Bluetooth Headset
How to connect
- Please keep the distance between the Bluetooth headset and the mobile phone (or other connected devices) within 1 meter, the closer the better;
- Open the lid of the charging case, take out the L/R headphones and automatically pair, the pairing time is 3~5 seconds, prompt slow flashing, wait Connect Bluetooth devices; If the pairing is not successful for 3 minutes, please turn off the computer.
- Turn on the user’s mobile phone Bluetooth function (or other Bluetooth devices), search or scan, at this time the mobile phone will search for a nearby Bluetooth device, click on the searched headset name: H13, after successful connection, you can make a mobile phone call at this time, listen to songs;
- After the phone and Bluetooth are successfully connected, the device will automatically shut down after 5 minutes of disconnection from a distance; If the headset is not connected for 5 minutes, the headset will automatically shut down.
Earphone operation mode (power on and pairing)
Boot up
| 1、Open the lid of the charging case, take out the L/R earbuds, and automatically turn on and pair automatically
2、L/R ear press and hold for 3 seconds (in the shutdown state)
---|---
Shut down
| 1、After the earphone L/R is placed in the charging case, it will automatically turn off
2、 L/R ear press and hold for 5 seconds (in the power on state) and the device is invalid after connecting
Earphone operation mode (call control)
Call answer
|
Press 2 times (L/R) on the touch area to answer the call
---|---
Call hang up
|
Press 2 times (L/R) to touch area to hang up the phone
Incoming call rejection
|
The ear lever long presses and holds for 3 seconds (L/R) to touch area to reject incoming calls
Voice assistants
| Long press the ear handle on the left for 2~3s to enter the voice assistant
Earphone operation mode (playing music)
Play / Pause
|
Press 2 times (L/R) on the touch area
---|---
Previous piece
|
Press 3 times (L) on the touch area
Next track
|
Press 3 times (R) on the touch area
Game mode
|
The ear lever long presses and holds for 3 seconds (R) to touch area cut-in game mode
Volume +
|
Press 1 time (R) on the touch area to vol+
Volume-
|
Press 1 time (L) on the touch area to vol-
Charging case LED screen indicator status indication
| Product status | Indicator light definition |
|---|---|
| Headphones in/out of the charging case | The earphones enter / exit the |
charging case, and the corresponding power white light flashes 1 time each.
Charging in the charging case
|
1. Four white lights are on for 1s at the same time;
2. When charging a charging case with less than 25% power, the charging compartment indicator light is from left to leftThe right cycle flashes, when the power reaches 25%, the 25% power indicator is long, it will automatically jump to the 50% power indicator for charging, the charging compartment indicator flashes cyclically from left to right, when the power reaches 50%, the 50% power indicator is long; 75% charge and 100% charge are repeated in the above way, and the charging is cycled in turn.
Charging complete| The charging compartment is 100% fully charged and four white lights are always on.
The charging compartment closes the lid to charge
the headphones
| The earphone is charged with the lid closed in the charging compartment, and
the power white light is always on for 10s and turns off.
Charging case low battery prompt| The charging compartment battery is low –
the corresponding 25% charge light flashes quickly.
Charging case full battery prompt| The charging compartment is 100% fully
charged and four white lights are always on.
FCC STATEMENT
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However. there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
IC warning
This device contains license-exempt transmitter (s)/receiver(s)/ that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- this device may not cause interference and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure: This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with IC’s RF Exposure guidelines, This device and its antenna(s) must not be co- located or operation in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>