medela 008.0437 Plus PersonalFit Breast Shield Instruction Manual
- June 18, 2024
- medela
Table of Contents
008.0437 Plus Personal Fit Breast Shield
Instruction Manual Instructions for use
Personal Fit™ PLUS breast shield
Home use
008.0437 Plus Personal Fit Breast Shield
Please read all instructions before using this product.
Keep these instructions for future reference.
Product description
The reusable Personal Fit PLUS breast shield is compatible with the reusable Personal Fit PLUS pump sets for Symphony , as well as with the Medela breast pumps Swing Maxi, Swing, Freestyle and Harmony. Personal Fit PLUS breast shields are available in different sizes (see product variants). ® Refer to the pump/pump set instructions for use for information on operating the pump and pump set.
Intended purpose
The breast shield is intended to be connected to a breast pump via a connector assembly in order to apply vacuum at the breast and channeling the breast milk to a collection container e.g. bottle.
Important safety information
CAUTION
- The breast shield is a personal care item intended for use by a single user only. It should not be shared between mothers.
- Use Medela original accessories only.
- Inspect before each use. Replace mouldy, damaged or worn parts.
- Never leave packaging and components unattended. Keep them out of reach of children.
- Pressing breast shields too firmly onto the breasts may affect the milk flow.
- If problems or pain occur, consult a lactation consultant or breastfeeding specialist.
Cleaning and hygiene
- Before using the breast shield for the first time, you must clean it thoroughly. Per form both steps “Af ter each use” then “Once per day”.
- Clean the breast shield immediately af ter use to avoid drying up of milk residues and to prevent grow th of bacteria.
- Only use drinking-quality water for cleaning.
- Take care not to damage par ts when using a brush.
- Do not use abrasive washing-up liquids/detergents when cleaning the breast pump, pump components or pump set par ts.
Prior to first use / After each use
-
Rinse the breast shield with cold, clear water (approx.20 °C).
-
Clean with plenty of warm, soapy water (approx. 30 °C).
Use a commercially available washing-up liquid, preferably without artificial fragrances and colorings (pH neutral). -
Rinse with cold, clear water (approx. 20 °C).
-
As an alternative to manual cleaning, you can also clean the breast shield in the dishwasher. Place it on the top rack or in the cutlery section. Use a commercially available dishwashing detergent.
Prior to first use / Once per day
- Cover the breast shield with water and boil at least 5 minutes.
Drying / Storage
- Dry with a clean cloth or allow to air dry completely on a clean cloth.
- Put the breast shield in a clean storage bag or clean environment. Do not store in air tight container/bag. It is important that all residual moisture dries completely.
Assembling and usage
- For information about how to use the breast shield and breast pump, see the instructions for use of the breast pump/pump set.
Choosing your Personal Fit PLUS breast shield size
Your breast shield size could change over the duration of your pumping
experience. At all times during this period, the breast shield must fit
correctly.
A correctly fit ting breast shield helps to prevent compression of the milk
ducts during pumping, supports the optimal emptying of the breast and helps to
maximize the milk output.
In a correctly fit ting breast shield the nipple is centered and moves freely.
See the first picture below:
The breast shields in the pictures below do not fit correctly:
Find more information at www.medela.com/personalfit
Product variants
Personal Fit™ PLUS breast shield S (21 mm) 008.0437, 008.0439, 008.0440,
008.0441
Personal Fit™ PLUS breast shield M (24 mm)
008.0442, 008.0444, 008.0445, 008.0446
Personal Fit™
PLUS breast shield L (27 mm)
008.0447, 008.0449, 008.0450, 008.0451
Personal Fit™ PLUS breast shield XL (30 mm)
008.0452, 008.0454, 008.0455, 008.0456
Personal Fit™ PLUS breast shield XXL (36 mm)
008.0457, 008.0459, 008.0460, 008.0461
Material
Polypropylene
Disposal
According to local regulations.
Meaning of symbols
| General safety alert symbol, point s to information related to safety.
---|---
| Identifies the manufacturer.
| Indicates the date of manufacturing.
| Identifies a medical device.
| Indcates the manufacturer’s batch code so that the batch or lot can be
identified.
| Read and follow the instruc tions for use.
| Indcates the part number of the produc t.
| The packaging contains produc t s intended to come in contact with food
according to regulation EC 1935/2004.
| Keep away from sunlight.
| Contains fragile goods. Handle with care
| Keep away from rain. Keep in dry conditions.
| This symbol indicates the material from which an item is made
| Indicates conformity with the EU’s requirements for medical devices.
Medela Australia Pty Ltd
3 Arco Lane,
Heatherton Vic, 3202
Australia
www.medela.com.au
© Medela AG/ref. master doc.
101033517/D 201.0535/2024-03/ E
References
- Breastfeeding & Pumping
- Breastfeeding & Pumping
- Breastfeeding & Pumping
- Too much breast milk? How to reduce oversupply |Medela
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>