rizoma PT706 Kit Porta Targa Side Arm User Guide
- June 15, 2024
- rizoma
Table of Contents
rizoma PT706 Kit Porta Targa Side Arm
Product Information
Specifications
- Product Name : Rizoma License Plate Holder
- Model Number : PT706
- Difficulty Level : Simple
- Time of Assemblage : 25-30 minutes
- Compatibility: Check with your authorized RIZOMA dealer for compatibility with your motorcycle
Product Usage Instructions
Installation Steps
- Remove Original License Plate: Begin by removing the original license plate from your motorcycle.
- Disassemble OEM Wiring: Carefully disassemble the OEM wiring from the license plate holder.
- Install License Plate Bracket: Mount the license plate bracket securely in place.
- Install Small License Plate Bracket: If applicable, install the small license plate bracket following the provided instructions.
Maintenance
Regularly inspect and maintain your RIZOMA products. Check for any leaks,
deformations, cracks, or wear. If any issues are found, contact your RIZOMA
dealer for inspection before riding again. Do not attempt to repair or modify
the products; always replace with RIZOMA original components.
Compatibility
Rizoma products may not be compatible with all motorcycles or aftermarket
accessories. It is recommended to consult your authorized RIZOMA dealer for
compatibility assurance.
Frequently Asked Questions (FAQ)
-
Q: Can I modify the RIZOMA products for better fitment?
- : It is strongly advised not to modify RIZOMA products. Always use RIZOMA original components for safety and optimal performance.
-
Q: How often should I inspect my RIZOMA products?
- A: The more you ride, the more frequently you should inspect your RIZOMA products. Regularly check for any signs of damage or wear and have them inspected by a dealer if needed.
-
Q: What should I do if the RIZOMA product is not compatible with my motorcycle?
- A: Contact your authorized RIZOMA dealer for guidance on compatibility issues. It is crucial to ensure proper fitment and functionality for your safety.
User Manual Rev.: 05
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Warning: the installation of the license plate PT706 involves removal of the OEM undertail therefore, removing of the rear light and turn signals OEM the motorcycle loses the homologation for on-road use. Rizoma, in accordance with the provisions of the Highway Code, in this configuration recommends mounting the turn signals Rizoma FR155, which integrates the functions of brake light, tail light and turn signals homologation.
To comply with the TÜV and European Norm in force, the installation of the
license plate must be carried out as the enclosed instructions.
Consult the website www.rizoma.com, in FOX license
plate support section click “DOWNLOAD” to download the PDF document approval
ABE.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.
Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature. WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warrantee is not valid for any electric wires cutting or any product modify or tampering.
INSTALL LICENSE PLATE
WARNING: DON’T MODIFY THE TIGHTENING OF THE SCREW AND OF NUT.
WARNING: THE LICENSE PLATE INSTALLED CORRECTLY FOLLOW THE EUROPEAN NORM IN FORCE, ANY MODIFY MADE TO THE LICENSE PLATE CAN AFFECT ITS COMDI lANCE WITH THE DIPECTIVE
REMOVE ORIGINAL LICENSE PLATE
DISASSEMBLE OEM WIRING FROM LICENSE PLATE OEM
TO CONNECT THE RIZOMA PARTS: REMOVE THE ELECTRIC WIRING (DISASSEMBLE) FROM ORIGINAL LICENSE PLATE TO CONNECT THE RIZOMA PARTS: REMOVE THE ELECTRIC WIRING (DISASSEMBLE) FROM ORIGINAL LICENSE PLATE
INSTALL LICENSE PLATE BRACKET
WARNING: CHOOSE THE LICENSE PLATE BRACKET SUITABLE TO THE SIZE OF LICENSE PLATE.
INSTALL SMALL LICENSE PLATE BRACKET
EXAMPLE MOUNTING FR155 ON LICENSE PLATE
WARNING: FOUND THE CORRECT POSITION OF TURN SIGNALS RESPECT AT YOUR PLATE, INSERT THE ELECTRIC WIRINGS AND INSERT THE FIXING BUSHING.
INSERT WIRING IN SIDE ARM
WARNING: USE THREAD LOCKER MEDIUM LIQUID ON THE SCREWS
CONNECTIONS FR155 IN SIDE ARM
CONNECTIONS FR165 IN SIDE ARM
INSTALL SPACER AND RUBBERS
INSERT RUBBERS COMPLETE OF SPACER AND BUSHING IN THE BRACKET
INSTALL SIDE ARM
INSTALL BRACKET FOR WIRINGS
CONNECTIONS LICENSE PLATE LIGHT
WARNING: USE THE SHRINK SHEATH FOR GATHER TOGHETER AND PROTECT THE CONNECTORS.
CONNECTIONS FR155 IN UNDER SEAT WITH WIRING
WARNING: TO CONNECT THE FR155 TURN SIGNALS CONSULT THE MANUAL OF FR155 TO CHOOSE THE CORRECT SCHEMA.
CONNECTIONS FR155 IN UNDER SEAT WITH WIRING
INSTALL UNDER SEAT COVER
FIXING COVER AND SEAT
CHECK COUPLING
WARNING: CHECK THE RIGHT COUPLING BETWEEN THE UNDER SEAT COVER AND THE OEM COVER.
INSTALL TURN SIGNAL ON COVER
WARNING: MOUNT FOR BOTH SIDES
WARNING: TO INSTALL THE RIZOMA TURN SIGNALS DRILLED THE COVER AS THE IMMAGINE
INSERT ELECTRIC WIRINGS IN THE COVER
CONNECTIONS ORIGINAL WIRING
CONNECTIONS FR155 IN UNDER SEAT
WARNING: TO CONNECT THE FR155 TURN SIGNALS CONSULT THE MANUAL OF FR155 TO CHOOSE THE CORRECT SCHEMA.
CONNECTIONS FR155 IN UNDER SEAT
CONNECTIONS FR165 IN UNDER SEAT
WARNING: THE WHITE WIRE OF THE FR165 INDICATORS MUST NOT BE CONNECTED IN THE BMW R NINET MODELS.
RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>