BLACKSTONE 6029 28 Inch XL Griddle Drop In with Hood and Insulating Jacket Owner’s Manual

6029 28 Inch XL Griddle Drop In with Hood and Insulating Jacket

Product Information: 28 XL Griddle with Hood and Insulating Jacket

The Model number of the product is 6029v06. It is an XL griddle with a hood and an insulating jacket. The product comes with an instruction manual that contains important information necessary for the proper assembly and safe use of the appliance. The manual also includes warranty information and safety alerts. The North Atlantic Imports LLC 1-Year Warranty covers replacement parts up to one year after the date of purchase.

Safety Information
The instruction manual contains important safety information necessary for the proper assembly and safe use of the appliance. The manual includes safety alerts that indicate hazardous situations that, if not avoided, could result in death or serious injury. It is important to read and follow all warnings and instructions before assembling and using the appliance. Follow all warnings and instructions when using the appliance.

Product Usage Instructions

1. Before using the appliance, read and follow all warnings and instructions in the instruction manual.
2. Ensure that the appliance is properly installed according to local codes or ANSI Z223.1/NFPA 54, CSA B149.1, or CSA B149.2 in the absence of local codes.
3. Activate your warranty by providing the appliance’s serial number when registering on North Atlantic Imports LLC’s website.
4. Use the appliance exclusively for domestic use and not for private or public club, institutional, or commercial purposes.
5. Use the appliance in accordance with North Atlantic Imports LLC instructions.
6. Ensure that the appliance is operated under normal use and service for which it was intended.
7. If any part or parts of the appliance are defective under normal home use and service, contact North Atlantic Imports LLC for replacement or repair.
8. Keep the instruction manual for future reference.

For the latest version of this manual, scan this code or visit: BlackstoneProducts.com/support

IMPORTANT:
This instruction manual contains important
information necessary for the proper assembly and safe use of the appliance.
Read and follow all warnings and instructions before assembling and using the appliance.
Follow all warnings and instructions when using the appliance.
Keep this manual for future reference.

Installer/Assembler: leave these instructions with the consumer.

SAFETY ALERT KEY

• DANGER
  Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

• WARNING
  Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

• CAUTION
  Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

• NOTICE
  Indicates information considered important, but not hazard-related (e.g. messages related to property damage).

IMPORTANT SAFETY INFORMATION

DANGER
If you smell gas:

• Shut off gas to the appliance.
• Extinguish any open flame.
• Open hood.
  If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.
  Failure to follow these instructions could result in fire or property damage, personal injury or death.

DANGER

• NEVER operate this appliance unattended.
  If a fire should occur, keep away from the appliance and immediately call your fire department. do Not attempt to extinguish an oil or a grease fire with water.
  Failure to follow these instructions could result in fire or property damage, personal injury or death.

ELECTRIC APPLIANCE SAFETY
TO PROTECT AGAINST ELECTRIC SHOCK:

• Do NOT immerse cord or plugs in water or other liquid?
• Unplug from the outlet when not in use and before cleaning? Allow to cool before putting on or taking off parts?
• Do NOT use an outdoor cooking gas appliance for purposes other than intended?
• Do NOT operate this appliance with a damaged cord, plug, or after the appliance malfunctions or has been damaged in any manner? Contact the manufacturer for repair?
• Do NOT let the cord hang over the edge of a table or touch hot surfaces?
• Keep any electrical supply cord and the fuel supply hose away from heated surfaces?
• When connecting, first connect plug to the appliance then into the outlet?

USE ONLY A GROUND FAULT INTERRUPTER (GFI) PROTECTED CIRCUIT WITH THIS APPLIANCE.

• This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with NFPA 70 Canadian electrical Code, Part I?
  Do NOT remove the grounding plug or use with an adapter of 2 prongs?

• Use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and approved for outdoor use with a W- A marking?

WARNING

• Do NO+T store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
• An lPG cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

GAS APPLIANCE SAFETY

• The use of alcohol, prescription, or non-prescription drugs may impair the consumer’s ability to properly assemble or safely operate the appliance?
• Keep children and pets away from the appliance at all times?
• Have a type BC or ABC fire extinguisher readily available?

DO NOT USE FOR PURPOSES OTHER THAN INTENDED:

• Do NOT use for commercial cooking?
• Do NOT use this appliance as a heater?

WARNING
Improper installation, use, adjustment, alteration, service, modification, or maintenance can cause injury or property damage. Refer to this manual.

INSTALLATION MUST CONFORM WITH LOCAL CODES
In the absence of local codes, installation must conform with either ANSI Z223?1/NFPA 54, CSA B149?1, or CSA B149?2?

ACTIVATE YOUR WARRANTY
The North Atlantic Imports llC 1-Year Warranty covers replacement parts up to one year after the date of purchase?

TO ENABLE THIS WARRANTY, YOU WILL NEED TO PROVIDE:
Your appliance’s Serial Number

The Serial Number can be found on your appliance’s Manufacturer label
(The Manufacturer label is a large silver sticker found on the body of your appliance.)

Register your appliance at BlackstoneProducts.com/register

WARRANTY OVERVIEW
North Atlantic Imports, the manufacturer, will warranty for one year from purchase all parts, workmanship, and finishes? It will be the manufacturer’s option as to whether to repair or replace any of the above items? All warranties are limited to the original purchaser only? This warranty does not cover any liability on the part of North Atlantic Imports, its agents or employees, for any indirect or conse-quential damages for breach of warranty? The purchaser must follow the manufacturer’s usage instructions?
Under no circumstances is the manufacturer responsible for damages from the failure to operate the cooking station properly? It is the responsibility of the purchaser to establish the warranty period by verifying the original purchase date with original sales receipt?

DETAILED EXPLANATION OF THE WARRANTY
North Atlantic Imports llC warrants to the owner that the product covered by this agreement is free from defects in material and  workmanship under normal use and service for which it was intended if, but only if, it has been operated in accordance with North Atlantic
Imports llC instructions exclusively for domestic use, and not for private or public club, institutional or commercial purposes.
North Atlantic Imports llC’s obligation under this warranty is limited to replacing or repairing, free of charge, any part or parts that may prove, to the satisfaction of North Atlantic Imports llC, to be defective under normal home use and service within the following stated periods of time from the date of purchase; for one year from purchase, all parts, finish, and workmanship. Should any failure to conform to this warranty become apparent during applicable warranty periods stated above, the original purchaser must notify
North Atlantic Imports llC of breach of warranty within the applicable warranty period.

North Atlantic Imports llC shall upon notice and compliance by the original purchaser with such instructions, correct such nonconfor-mity by repair or replacement of the defective part or parts?
Correction in the manner provided above shall constitute a fulfill-ment of all obligations of North Atlantic Imports llC with respect to the quality of the product?
North Atlantic Imports llC does not warrant this equipment to meet the requirement of any safety code of any state, municipality or other jurisdiction, and the original purchaser assumes all risk and liability whatsoever resulting from the use thereof, whether used in accor-dance with North Atlantic Imports llC instructions or otherwise?
This warranty does not cover and is intended to exclude any liability on the part of North Atlantic its agents, servants or employees whether under this warranty or implied by law for any indirect or consequential damages for breach on any warranty? The purchaser must establish all applicable warranty periods pursuant to this warranty by verifying the original purchase date by producing the dated sales receipt? This warranty shall not apply to this product or any other part thereof which has been subject to accident, negli- gence, alteration, abuse, or misuse or which has been repaired or altered without North Atlantic written consent, outside of North Atlantic Imports llC factory? The full manufacturer warranty is
not valid for griddles purchased from unlicensed, third-party resellers, purchased at a discount due to missing or damaged parts, or purchased as a floor model; at the discretion of North Atlantic Imports?
North Atlantic Imports llC makes no warranty whatsoever in respect to accessories or parts not supplied with it? This warranty shall apply only within the boundaries of the United States of America and Canada? This warranty gives the original purchaser specific rights, and the original purchaser may also have other rights, which vary from state to state?

ASSEMBLY GUIDE

EXPLODED VIEW

Parts List

Hardware pack (1 piece)

• a. M6 shoulder bolts (4 pieces)
• b. M6x15 screws (5 pieces)
• c. M6x35 screws (4 pieces)
• d. M6x45 screws (4 pieces)

Assembly Instructions
Find a large, clean area to assemble your appliance?
Remove all packing material before assembling?

CAUTION
Sharp edges. Wear gloves while assembling.

CAUTION
Heavy pieces. Two people should assemble this appliance.

NOT INCLUDED:
lPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
LPG cylinder must include collar to protect lPG cylinder valve TOOL NEEDED:
Phillips head  screwdriver

STEP 01: Use four (4) M6 shoulder bolts [a.] to attach the handle and hood handle standoff and two (2) mica washers to the front of the hood?

STEP 02 : Slide the grease cup into the holder on the back of the griddle body?

STEP 03: Install the three (3) control knobs by pushing them into place in the oFF position?

STEP 04: Remove the four (4) protective washers from the griddle foot pins? With the help of another person, place the griddle top onto the griddle body by aligning the four foot pins to the holes on top of the unit?

Make sure the front pins are fully seated in the holes, then push the griddle top back to lock the griddle in place?

OPTION A: INSTALL AS DROP-IN WITH INSULATING JACKET

STEP 01: Slide the jacket left inner panel into the jacket left outer panel?

STEP 02: Slide the jacket right inner panel into the jacket right outer panel?

STEP 05: Use four (4) M6x35 screws [c.] to attach the left and right jacket panel assemblies to the jacket base panel assembly?

STEP 06: Use five (5) M6x15 screws [b.] to attach the rear jacket panel assembly to the jacket base panel assembly?

STEP 07: Use four (4) M6x45 screws [d.] to secure the rear jacket panel to the left and right jacket panel assemblies?
Slide the jacket silicon sleeve into the jacket base panel assembly? STEP 08: With the help of another person, direct the regulator hose and electric wires through the jacket silicon sleeve and place the griddle body onto the jacket base panel assembly?

STEP 09

1. Push the 18P male and female connector together? depress the yellow clip to lock the connector?
   Push the 3P male and female connector together?
   Note: the PCB box must be permanently attached to the cabinet?

STEP 10: Remove the self-tapping screw from the griddle body and use it to attach the match holder?

STEP 11: Proceed to USING YOUR BLACKSTONE?

NOTICE
DO NOT leave the hood closed for more than 10 minutes while cooking.

NOTICE
The insulating jacket must be permanently secured to cabinet.

Grease cup liner required for use?

OPTION B: FOR NON-COMBUSTIBLE COUNTERTOP USE

STEP 01: Unscrew the four (4) M6 screws from the hat channels? Screw the four (4) feet through the hat channels and into the base?

STEP 02: With the help of another person, set on counter? Hose and cables MUST be routed through the left side? Proceed to USING YOUR BLACKSTONE? NOTICE
DO NOT leave the hood closed for more than 10 minutes while cooking.

NOTICE
The included feet MUST be used when griddle is in the tabletop configuration.

Do NOT operate this appliance any closer than 36 in (1 m) from the sides and back of the appliance to combustible construction? WITHOUT JACKET AA: : 36 in (36 in (1 m1 m))

WARNING
The cabinet CAN NOT store 2 or more LPG cylinders.

USING YOUR BLACKSTONE

BeFoRe CooKING
CHECK BURNERS
Before connection, ensure that there is no debris caught in the head of the gas cylinder, regulator, burner and burner ports?
Spiders and insects can nest within and clog the burner/venturi tube at the orifice?
Please reference the Troubleshooting chapter for burner cleaning instructions?

DANGER
Flammable items can spontaneously combust if placed near the appliance.
DO NOT place flammable items such as aerosol containers, oily or greasy towels near the cooking surface.
Keep the outdoor cooking gas appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

THE MINIMUM AMBIENT OPERATING TEMPERATURE IS 0°F (-18°C).

BUILT-IN INSTALLATION

• Do DOT install this appliance under overhead combustible surfaces.
  If installed under overhead combustible construction, the appliance must be installed in conjunction with a suitable Ul710 or UlC S646 approved heavy duty vent hood only.

For installation in a built-in enclosure constructed of combustible materials when installed with the included insulating jacket.

CAVITY MINIMUM DIMENSIONS

• A: Width = 38.75 in
• B: depth = 27.5 in
• C: Height = 8 in
  (>8 in will cause hood interference)

HOLE MINIMUM DIMENSIONS

• D: distance from side = 10.5 in
• E: distance from front = 3.75 in
• F: diameter = 4.5

SETTING UP YOUR OUTDOOR SPACE
THIS APPLIANCE MUST ONLY BE USED OUTDOORS.

• Do NOT use this appliance inside buildings, garages, or any other enclosed area?
  Do NOT install this appliance in or on a boat?

• Do NOT install this appliance in or on a recreational vehicle? MAINTAIN PROPER CLEARANCES FROM COMBUSTIBLE MATERIAL.

• Do NOT use this appliance on or under any apartment or condo-minimum balcony or deck?

• Do NOT obstruct the flow of combustion and ventilation air?

• Do NOT operate this appliance any closer than 6 in (150mm) from the sides and back of the appliance to vertical combustible construction.A = 36 in (1 m)

• Do NoT use this appliance under overhead

WARNING
The cabinet CAN NOT store 2 or more LPG cylinders.

SHELTERED OUTDOOR AREAS:
All openings must be permanently open; sliding doors, garage doors, windows or screened openings are not considered as permanent openings?
An appliance is considered to be outdoors if installed with shelter no more inclusive than:

• With walls on three sides, but with no overhead cover?

• Within a partial enclosure that includes an overhead cover and no more than two side-walls? The sidewalls may be parallel, as in a breezeway, or at right angles to each other?
• Within a partial enclosure that includes an overhead cover and three sidewalls, as long as 30% or more of the horizontal periphery of the enclosure is permanently open?

LPG Cylinder Requirements
ONLY USE A 20 LB (9 KG) CYLINDER

• The LPG supply cylinder to be used must be constructed and marked in accordance with the specifications for IP gas cylinders, U?S? department of Transportation (DOT) or the Standard for Cylinders, Spheres and Tubes for the Transportation of dangerous Goods, CAN/CSA-B339?
• Only LPG cylinders marked “propane” shall be used?
• The LPG cylinder supply system must be arranged for vapor withdrawal?

Always keep new lPG cylinders in upright position during use, transit or storage.

• Always keep the ventilation opening(s) of the cylinder enclosure free and clear from debris

THE LPG CYLINDER VALVE MUST HAVE:

• Type 1 valve outlet (thread on the outside).
• Safety relief valve.
• UI listed overfill Protection device (oPd). This oPd safety feature is identified by a unique triangular hand wheel.
• Dust cap.

The seal on the type 1 valve outlet could, over time, show marked and visible damage or deterioration that might cause a leak even with the connection tightened?

• A visual inspection for the seal must be carried out every time a LPG cylinder is replace or refilled?
• Any LPG cylinder showing signs of damage or deterioration as those illustrated including visible cracks and pitting, must be returned unused to the seller?

STORING LPG CYLINDERS

WARNING

• DO NOT store a spare LPG cylinder under or near this appliance.

• DO NOT fill an LPG cylinder beyond 80% full.
  If the information above is not followed exactly, a fire causing death or serious injury may occur.

• The LPG cylinder must be turned oFF when the appliance is not in use?

• LPG cylinders must be stored outdoors and out of the reach of children?

• Do NOT store an lPG cylinder inside a building, garage, or any other enclosed area?

FILLING & EXCHANGE

• Use only those reputable exchange companies that inspect, precision fill, test and certify their cylinders? LPG dealer must purge new cylinder before filling?
• Volume of propane in cylinder will vary by temperature?

WARNING
A frosty regulator indicates gas overfill.
Immediately close LPG cylinder valve and call local LPG dealer for assistance.

• Do NoT release liquid petroleum gas (lPG) into the atmosphere?
• To remove gas from LPG cylinder, contact a certified LPG dealer or local fire department for assistance? exchange cylinder only for an oPd safety feature-equipped cylinder?

Your retailer can help you match a replacement LPG cylinder to your appliance

LEAK TEST INSTRUCTIONS

• Leak test new and exchanged LPG cylinders Before connecting to griddle?
• Do NOT smoke during leak test?
• Do NOT use an open flame to check for gas leaks?
  Appliance must be leak tested outdoors in a well-ventilated area, away from ignition sources such as gas fired or electrical appliances?

During leak test, keep appliance away from open flames or sparks?

LEAK TEST: LPG CYLINDER
STEP 01: Use a clean paintbrush to brush a 10/90 mild soap and water solution onto joint areas of the LPG cylinder?
(Indicated by arrows in figure 01.)

Leaks are indicated by growing bubbles? WARNING
If growing bubbles appear during leak test, DO NOT use or move the LPG cylinder.
Immediately contact an LPG supplier or fire department.

FITTINGS & HOSES

• Annual checking and tightening of metal fittings is recommended?
• Keep the fuel supply hose away from any heated surfaces?
• Before each use, check to see if hoses are cut or worn?
• Replace damaged hose before using appliance?

(Use only Blackstone approved valve, hose, or regulator. Failure to comply will void the warranty.).

REGULATOR SAFETY

• Use this appliance, as purchased, only with gas and regulator/valve assembly supplied.

• Do NoT cross thread the connection between your LPG cylinder and regulator.
  Cross threading can occur if you force thread a connection at an improper angle. This will damage the threads, lead to propane leaking, and potentially result in a build-up of fuel that can ignite.

• If you can not connect the regulator, do NoT use the regulator.
  Regulator must be replaced with a Blackstone approved model by a professionally
  licensed, authorized dealer.

CONNECT THE LPG CYLINDER

• STEP 01 : Turn the control knobs to off.

1. Ensure that the LPG cylinder is oFF by turning the oPd hand wheel clockwise to a full stop.
2. Remove the safety cap from the Type 1 valve outlet.

• STEP 02: Hold the regulator in a straight line with the Type 1 valve outlet so as not to cross thread the connection.
  Center and insert the regulator nipple into the Type 1 valve outlet.
  Hand-tighten the coupling nut in a clockwise direction.
  (Do NoT use tools to connect.)
  If connection cannot be completed, disconnect regulator and repeat this step.

The safety relief valve must face away from the user while the appliance is in use.

LEAK TEST: VALVES, HOSE & REGULATOR

• STEP 01 : Turn the control knobs to oFF.
• STEP 02: Connect the regulator to the lPG cylinder.
• STEP 03: Completely open the lPG tank by turning the oPd hand wheel counterclockwise.
  • If you hear a rushing sound, turn gas off immediately. There is a major leak at the connection.
  • Immediately close the lPG cylinder by turning the oPd hand wheel clockwise and re-tighten connections. If leaks cannot be stopped do NoT TRY To RePAIR.
• STEP 04: Use a clean paintbrush to brush a 10/90 mild soap and water solution onto joint areas of valves and regulator. (Indicated by arrows in figure 02.)
  • Leaks are indicated by growing bubbles.
  • Immediately close the lPG cylinder by turning the oPd hand wheel clockwise and re-tighten connections.

WARNING
If leaks cannot be stopped, DO NOT try to repair.
Regulator must be replaced with a Blackstone approved model by a professionally licensed, authorized dealer.

DISCONNECTING THE LPG CYLINDER 20 LB (9 KG)

• STEP 01: ensure that the control knobs are turned to oFF.
  • Ensure that the LPG cylinder is OFF by turning the oPd hand wheel clockwise to a full stop.
  • Turn the coupling nut counter- clockwise by hand to remove the regulator. (do NOT use tools to disconnect.)
• STEP 02 : Place dust cap on lPG cylinder valve outlet whenever cylinder is not in use.
  Only install the type of dust cap on cylinder valve outlet that is provided with the cylinder valve. other types of aps or plugs may result in leakage of propane.

IGNITION INSTRUCTIONS

1. CHECK VALVES

   • STEP 01: Turn knob to off position.

   • STEP 02: Push in knob and release. Knob should spring back.
     If knobs do NoT spring back, replace valve assembly before using appliance.

   • STEP 03: Rotate knob to loW then turn back to oFF. Knob should turn smoothly
     WARNING
     If burner does not ignite with open LPG cylinder valve, gas will continue to flow out of burner and could accidentally/ inadvertently ignite with risk of injury.
     Ensure gas is of at the supply shut of valve before checking appliance valves.

2. BATTERY POWERED IGNITION
   Do NOT lean over the appliance while lighting

Make sure the appliance is plugged in.

STEP 01: Insert one (1) AA battery (not included) under the ignitor button.
Screw the button into place over the positive terminal

STEP 02

1. Push the control knob in to start gas flowing. (WHITE)
2. Turn the control knob counter-clockwise to activate the starter. (FLASHING BLUE)
3. Adjust the temperature to desired level. (ORANGE Note: If the magnet in the knob is disconnected, the indicator light will be orange? If the knob arrow is facing UP, gas is not flowing?

CHECK BURNER FLAME
Always check burner flame before use?

• STEP 01: light burners and rotate knobs from HIGH to lows?
• STEP 02: look below the cooking top to view burners? When knob is at HIGH, flames should be larger than when knob is at lows?

HEALTHY BURNER FLAME PATTERN

1. Flickers of yellow color.
2. Dark blue color.
3. Vibrant blue.

BURNER FLAMES ARE YELLOW OR IRREGULAR

If there is a sudden drop or low flame issue, please reference the Troubleshooting chapter.

Griddle Seasoning Instructions

WASHING YOUR GRIDDLE TOP BEFORE FIRST USE

NOTICE: Soap will ruin a seasoned griddle. This is the only time you should use soap on the griddle cooking surface.

• STEP 01: Wash the griddle cooking surface with hot, soapy water.
• STEP 02: Rinse and dry completely.

VIDEO TUTORIAL
How to Season a New Blackstone Griddle youtube.com/watch?v=VspmdVnj2pI&t=3s

STEP 01: Wipe any debris off griddle top. STEP 02: Set your griddle to high heat until your griddle top changes color. (~10 min) ****

STEP 03: Use tongs to hold a paper towel or cotton cloth and spread 2-3 tablespoons of your seasoning oil across the entire griddle top.
When seasoning your griddle top, remember to use a thin and even layer of oil—the thinner the layer of oil, the easier it will be to burn it offff.

STEP 04: The griddle top is ready for another layer of oil when it stops smoking. Repeat STEP 03 3-4 times, or until the griddle surface is black.

WHAT OIL IS BEST TO USE?

• Blackstone Seasoning and Cast Iron Conditioner.
• Any plant-based cooking oil.
• Rendered animal fat with no additives.

SEASONING TROUBLESHOOTING
THERE IS A BROWNISH RESIDUE ON THE GRIDDLE SURFACE:

POSSIBLE CAUSES

• Too much oil was used.
• You turned off the heat too soon.

SOLUTION

• STEP 01 Turn your griddle on high and let it heat for 10-15 minutes.
• STEP 02 Scrape off as much of the thickened and partially cooked oil as you can.
• STEP 03 Re-season with a very thin layer of oil.

THE EDGES OF THE GRIDDLE SURFACE ARE NOT BLACK:
After using your griddle for multiple cooks, the seasoning will even out and improve.

PREVENTING RUST
Use your griddle frequently. every time you cook, you are adding to the seasoning, which makes rust less likely.

NOTICE
If you live in a humid or coastal climate, your griddle may require more frequent seasonings between uses.

If rust appears on the griddle surface, rub it off with steel wool, low grit sandpaper or the Blackstone Pumice Stone and re-season the surface.

Cooking on Your Blackstone

• Caution
  This appliance will be hot during and after use. Use long handled utensils and oven mitts/ protective gloves when handling potentially hot parts to protect against burns and splatters.

NOTICE
DO NOT store any items within 3 in (8 cm) of the cooking surface while in use

IF GREASE OR OTHER HOT MATERIAL DRIPS ONTO VALVE, HOSE OR REGULATOR:

• STEP 01: Turn off gas supply immediately.
• STEP 02: determine the cause and correct it.
• STEP 03 : Clean and inspect valve, hose and regulator.
• STEP 04 : Perform a leak test. (Please reference the leak Test Instructions in USING YOUR BLACKSTONE.)

VIDEO RECIPES
Find recipes and cooking tips at:
BlackstoneProducts.com/blogs/recipes
youtube.com/c/BlackstoneGriddles
@blackstoneproducts

CLEANING YOUR GRIDDLE TOP
Clean griddle top after each use, while still warm.

• Do NOT use soap on the griddle top. This will destroy the griddle’s seasoning.
• The grease cup must be removed and emptied after each use.

CAUTION
Grease cup will be hot during and after use. DO NOT remove the grease cup until the griddle has completely cooled.

STEP 01: Push loose food debris into the grease cup with spatula or straight metal scraper.

STEP 02: Wipe down griddle top with paper towel.

STEP 03 : Apply a few tablespoons of water to the griddle surface, then scrape the water and debris into the grease cup.
(For stuck-on food residue, use a bit of coarse salt.)

STEP 04: Wipe again with a paper towel and dry completely.

STEP 05 : Apply thin coat of cooking oil to maintain seasoning and protect the griddle top.

CLEANING YOUR APPLIANCE

WARNING
Grease build up can cause a fire. Clean any part of the appliance that gets hot and experiences grease build up after each use.

Caution
All cleaning and maintenance should be carried out when the appliance is cool and with the fuel supply turned OFF at the LPG cylinder.

• Do NOT use abrasive pad on areas with graphics.
• If a bristle brush is used to clean any of the cooking surfaces, ensure no loose bristles remain on cooking surfaces prior to cooking.

PLASTIC PARTS & PAINTED SURFACES:
Wash with warm soapy water and wipe dry with a non-abrasive cloth.

NOTICE
DO NOT use Citrisol, abrasive cleaners, or a concentrated cleaner on plastic parts. This may result in damage to and failure of parts.

APPLIANCE STORAGE

• WARNING
  DO NOT move the appliance when in use. Allow the appliance to cool to 115°F (45°C) before moving or storing.

Storage of an appliance indoors is only permissible if the gas supply is disconnected and removed from the appliance.

COVER FIT GUIDE
Always cover your appliance when stored outdoors.
To find a cover that will fit your appliance, visit BlackstoneProducts.com/support.

TROUBLESHOOTING

IGNITION TROUBLESHOOTING
BURNER WILL NOT IGNITE:
If ignition does not occur in 5 seconds:

• STEP 01: Turn the burner control knob oFF.
• STEP 02: Wait 5 minutes.
• STEP 03: Repeat the lighting procedure.
  If this does not work, to determine the cause, please try to ignite your appliance with a match.

MATCH LIGHTING INSTRUCTIONS
Before beginning, check for gas leaks. open hood (if applicable).

• STEP 01: Turn control knob to OFF position
• STEP 02: light a match (or long lighter) no shorter than 11 inches long.
• STEP 03: Place the flame next to the burner.

• STEP 04: Push in and turn the control knob to start gas flowing. ensure burner lights and stays lit.

IF YOU CAN IGNITE YOUR APPLIANCE WITH A MATCH:

GAS FLOW TROUBLESHOOTING
BURNER FLAMES ARE YELLOW OR IRREGULAR:

• Appliance will not achieve a high heat or heats unevenly.
• Burner flames start strong, then immediately drop to low even when burner is set to high position.
• Flame height drops when a second burner is lit.
• Flames do NoT extend the full length of the burner, or only run on one side of the burner.
• Burner flames are inconsistent

POSSIBLE CAUSES                                         SOLUTION

A FLAME IS COMING OUT OF THE AIR GATE:

POSSIBLE CAUSES
Something is blocking the venturi in the burner.

SOLUTION
Clean the burner assembly to remove the obstruction.

CLEANING THE BURNER ASSEMBLY

To reduce chance of “flash-back” the procedure below should be followed at least once a month when spiders are most active or when your appliance has not been used for a period of time

VIDEO TUTORIAL
How to Clean Your Burner Tube
youtube.com/watch?v=xKQTCrFCzf8

• STEP 01: Ensure that the gas is turned oFF at control knobs and gas supply. Remove the griddle top.

• STEP 02: Carefully detach and remove the burner.

• STEP 03: Clean the inside of the burner:

  • Run a narrow bottle brush through each burner tube several times (do NoT use wire brushes)
  • Run a stiff wire bent into a small hook through each burner tube several times.
  • Use compressed air to blow through the burner tube and out the burner ports.
    Check that air blows through each hole.
    (Wear eye protection)

• STEP 04: Brush entire outer surface of burner to remove grime

The gas rail fuel nozzle must be reengaged within the burner opening.

CUSTOMER SUPPORT
Visit us online at Blackstone Products.com/support for assistance concerning appliance use, replacement parts, or your warranty.

CUSTOMER SUPPORT HOURS:
Monday – Friday
7:00 am – 5:00 pm ( Mountain Time)

References

• Blackstone Recipes – Blackstone Products
• Register Product - Blackstone Products
• Support – Blackstone Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>