BLACKSTONE 6961 Portable Pizza Oven Owner’s Manual

Model: 6961 PORTABLE PIZZA OVEN

IMPORTANT:
This instruction manual contains important
information necessary for the proper assembly and safe
use of the appliance.
Read and follow all warnings and instructions before
assembling and using the appliance.
Follow all warnings and instructions when using
the appliance.
Keep this manual for future reference.
Installer/Assembler: leave these instructions with the consumer

For the latest version of this manual, scan this code or visit

BlackstoneProducts.com/support

SAFETY ALERT KEY

DANGER
Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
CAUTION
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

WARNING
Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
NOTICE
Indicates information considered important, but not hazard related (e.g. messages related to property damage)

IMPORTANT SAFETY INFORMATION

DANGER
If you smell gas:

• Shut off gas to the appliance.
• extinguish any open flame.
• If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.
  Failure to follow these instructions could result in fire or property damage, personal injury or death.

DANGER

• NEVER operate this appliance unattended.
• NEVER operate this appliance within 10 ft (3.0 m) of any structure, combustible material or other gas cylinder.
• NEVER operate this appliance within 25 ft (7.5 m) of any flammable liquid.
• If a fire should occur, keep away from the appliance and immediately call your fire department. do NoT attempt to extinguish an oil or a grease fire with water.
  Failure to follow these instructions could result in fire or property damage, personal injury or death.

WARNING

• do NOT store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
• An IPG cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

GAS APPLIANCE SAFETY

• The use of alcohol, prescription, or non-prescription drugs may impair the consumer’s ability to properly assemble or safely operate the appliance.
• Keep children and pets away from the appliance at all times.
• Have a type BC or ABC fire extinguisher readily available.

DO NOT USE FOR PURPOSES OTHER THAN INTENDED:

• do NoT modify this appliance.
• do NoT use for commercial cooking.
• do NoT use this appliance as a heater.

THIS APPLIANCE SHALL BE USED OUTDOORS ONLY.

• do NoT use this appliance inside buildings, garages, or any other enclosed area.
• do NoT install this appliance in or on a boat.
• do NoT install this appliance in or on a recreational vehicle.

MAINTAIN PROPER CLEARANCES FROM COMBUSTIBLE MATERIAL:

• do NoT use this appliance on or under any apartment or condominium balcony or deck.
• do NoT use this appliance under overhead combustible construction.
• do NoT obstruct the flow of combustion and ventilation air.
• do NoT operate this appliance any closer than 36 in (1 m) from the sides and back of the appliance.
  

INSTALLATION MUST CONFORM WITH LOCAL CODES
In the absence of local codes, installation must conform with:
a. National Fuel Gas Code, ANSI Z2231/NFPA 54, Storage and Handling
of Liquefied Petroleum Gases, ANSI/NFPA 58; or
b. Natural Gas and Propane Installation Code, CSA B1491; Propane
Storage and Handling, CSA B1492; or
c. The Standard for Recreational Vehicles, ANSI A1192/NFPA 1192; and
Recreational Vehicle Code, CSA Z240 RV Series, as applicable

ACTIVATE YOUR WARRANTY

The North Atlantic Imports llC 1-Year Warranty covers replacement parts up to one year after the date of purchase.
TO ENABLE THIS WARRANTY, YOU WILL NEED TO PROVIDE:
☞Your appliance’s Serial Number

The Serial Number can be found on your appliance’s
Manufacturer label.
(The Manufacturer label is a large silver sticker found on the body of your appliance.)

Register your appliance at

BlackstoneProducts.com/register

WARRANTY OVERVIEW
North Atlantic Imports, the manufacturer, will warranty for one year from purchase all parts, workmanship, and finishes. It will be the manufacturer’s option as to whether to repair or replace any of the above items. All warranties are limited to the original purchaser only. This warranty does not cover any liability on the part of North Atlantic Imports, its agents or employees, for any indirect or conse-quential damages for breach of warranty. The purchaser must follow the manufacturer’s usage instructions.
Under no circumstances is the manufacturer responsible for damages from the failure to operate the cooking station properly. It is the responsibility of the purchaser to establish the warranty period by verifying the original purchase date with original sales receipt.

DETAILED EXPLANATION OF THE WARRANTY
North Atlantic Imports LLC warrants to the owner that the product covered by this agreement is free from defects in material and work-manship under normal use and service for which it was intended if, but only if, it has been operated in accordance with North Atlantic Imports LLC instructions exclusively for domestic use, and not for private or public club, institutional or commercial purposes.
North Atlantic Imports LLC’s obligation under this warranty is limited to replacing or repairing, free of charge, any part or parts that may prove, to the satisfaction of North Atlantic Imports LLC, to be defective under normal home use and service within the following stated periods of time from the date of purchase; for one year from purchase, all parts, finish, and workmanship. Should any failure to conform to this warranty become apparent during applicable warranty periods stated above, the original purchaser must notify North Atlantic Imports LLC of breach of warranty within the appli-cable warranty period. North Atlantic Imports LLC shall upon notice and compliance by the original purchaser with such instructions, correct such nonconfor-mity by repair or replacement of the defective part or parts. Correction in the manner provided above shall constitute a fulfill-ment of all obligations of North Atlantic Imports LLC with respect to the quality of the product.
North Atlantic Imports LLC does not warrant this equipment to meet the requirement of any safety code of any state, municipality or other jurisdiction, and the original purchaser assumes all risk and liability whatsoever resulting from the use thereof, whether used in accor-dance with North Atlantic Imports LLC instructions or otherwise. This warranty does not cover and is intended to exclude any liability on the part of North Atlantic its agents, servants or employees whether under this warranty or implied by law for any indirect or consequential damages for breach on any warranty. The purchaser must establish all applicable warranty periods pursuant to this warranty by verifying the original purchase date by producing the dated sales receipt. This warranty shall not apply to this product or any other part thereof which has been subject to accident, negli-gence, alteration, abuse, or misuse or which has been repaired or altered without North Atlantic written consent, outside of North Atlantic Imports LLC factory.
The full manufacturer warranty is not valid for griddles purchased from unlicensed, third-party resellers, purchased at a discount due to missing or damaged parts, or purchased as a floor model; at the discretion of North Atlantic Imports, North Atlantic Imports LLC makes no warranty whatsoever in respect to accessories or parts not supplied with it. This warranty shall apply only within the boundaries of the United States of America and Canada. This warranty gives the original purchaser specific rights, and the original purchaser may also have other rights, which vary from state to state.

ASSEMBLY GUIDE

PARTS LIST

ASSEMBLY INSTRUCTION

Find a large, clean area to assemble your appliance.
Remove all packing material before assembling.
CAUTION
Sharp edges. Wear gloves while assembling.
CAUTION
Heavy pieces. Two people should assemble this appliance.
STEP 01 Remove the oven base from its packaging and place it on a smooth flat surface.

NOT INCLUDED:
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Place appliance on a heat-re| TOOLS NEEDED:
Phillips head screwdriver &
Adjustable wrench

STEP 02 Place the oven base on its back. Remove the four (4) M8 flange nuts from the four (4) oven feet.
Use the four (4) M8 flange nuts to attach the heat shield and four (4) oven feet to the bottom of the oven base.

STEP 04 Remove the eight (8) M6x12 screws from the oven body side panels.
Use four (4) M6x12 screws to install one (1) side handle and two (2) mica sheets to the oven body left side panel.
Repeat with the oven body right side panel.

STEP 03 Remove the oven body from its packaging and place it on a smooth flat surface.
Remove the four (4) tapping screws from the upper brackets.
Use the four (4) tapping screws to attach the vent cover to the upper brackets.

STEP 05 Slide the square stone into the upper oven chamber brackets.
Center the round stone on the floor of the oven chamber.

STEP 06 Remove the one (1) M5 screw from the door handle. Use the one (1) M5 screw to attach the door handle to the front of the oven door.

STEP 07 With the help of another person, set the pizza oven into the oven base.
Note: Take extra care not to damage the burners. do NOT let the stones slide out.

STEP 08 Tilt the door brake behind the gauge panel and set the oven door assembly in place.

STEP 09 Proceed to USING YOUR BLACKSTONE.![BLACKSTONE 6961 Portable Pizza Oven

• Step 10](https://manuals.plus/wp-content/uploads/2023/06/BLACKSTONE-6961 -Portable-Pizza-Oven-Step 10.png)

USING YOUR BLACKSTONE

CONNECT THE LPG CYLINDER 1 LB (453 G)
STEP 01 Screw in the LPG cylinder into the gas regulator, turning the cylinder clockwise.
The regulator may make a humming or whistling noise during operation. This will not affect safety or use of the appliance.

REGULATOR SAFETY
WARNING
Cross threading can occur if you force thread a connection at an improper angle. This will damage the threads, lead to propane leaking, and potentially result in a build-up of fuel that can ignite.
DO NOT cross thread the connection between your LPG cylinder and regulator or regulator and gas rail.
WARNING
If you can not connect the regulator, DO NOT use the regulator.
Regulator must be replaced with a Blackstone approved model by a professionally licensed, authorized dealer.
Use this appliance, as purchased, only with gas and regulator/valve assembly supplied.
If regulator fails in unit, it must be replaced with a Blackstone approved model (found on your Manufacturer label) by a professionally licensed, authorized dealer. Failure to comply will void the warranty.

STEP 02 Insert the regulator and IPG cylinder into the gas line of the appliance. Turn the collar of the regulator clockwise to secure it to the gas line.

LPG CYLINDER SAFETY

• The LPG supply cylinder to be used must be constructed and marked in accordance with the specifications for LP gas cylinders, U.S. Department of Transportation (DOT) or the Standard for Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods, CAN/CSA-B339.
• Only LPG cylinders marked “propane” shall be used.
• The cylinder used, if in excess of 2.2 lb (1.00 kg) propane capacity, must include a collar to protect the cylinder valve.
• The LPG cylinder supply system must be arranged for vapor withdrawal.

Always keep new LPG cylinders in upright position during use, transit or storage. Ensure that the LPG cylinder is positioned below the regulator.
(If the liquid level of the propane is above the regulator, the regulator will frost.)

IF FROSTING PERSISTS AFTER BOTTLE IS ANGLED CORRECTLY:
STEP 01 Turn off the appliance and disconnect lPG cylinder immediately.
This indicates a problem with the lPG cylinder and it should not be used on any product.
STEP 02 Return lPG cylinder to supplier.![BLACKSTONE 6961 Portable Pizza Oven

• Step 14](https://manuals.plus/wp-content/uploads/2023/06/BLACKSTONE-6961 -Portable-Pizza-Oven-Step 14.png)

LEAK TEST INSTRUCTIONS
NOTICE
DO NOT use household cleaning agents. Damage to gas valve and regulator components may result.
Use a clean paintbrush and a 10/90 mild soap and water solution to perform the leak test.
STEP 01 Turn the control knobs to OFF.
STEP 02 Connect the IPG cylinder to the regulator. Connect the regulator to the appliance.
The regulator may make a humming or whistling noise during operation. This will not affect safety or use of the appliance.
STEP 03 Brush soapy solution onto joint areas of valves and regulator. leaks are indicated by growing bubbles.
STEP 04 If growing bubbles appear, re-tighten connections.

WARNING
If leaks cannot be stopped, DO NOT try to repair.
Regulator must be replaced with a Blackstone approved model.

CLEANING YOUR PIZZA STONE

BEFORE FIRST AND SUBSEQUENT USES:
STEP 01 Set your oven to HIGH for 10~15 min to burn off residue.
STEP 02 Flip stone over when cool.
NOTICE
DO NOT use soap on the cooking stone. This will leave a soap taste in food.

IGNITION INSTRUCTION

CHECK VALVES
STEP 01 Turn knob to OFF position.
STEP 02 Push in knob and release. Knob should spring back.
If knobs
If knobs do NOT do NOT spring back, replace valve assembly before using appliance.
spring back, replace valve assembly before using appliance.
STEP 03 Rotate knob to LOW then turn back to OFF. Knob should turn smoothly.

CHECK BURNER FLAME
Always check burner flame before use.
STEP 01 light burners and rotate knobs from HIGH to LOW.
STEP 02 look below the cooking top to view burners. When knob is at HIGH, flames should be larger than when knob is at LOW.

WARNING
A clogged burner can lead to a fire beneath the appliance.
Burner should be removed and cleaned annually or whenever heavy build-up or insects/insect nests are found.

PIEZO-ELECTRIC PIZZA OVEN IGNITION

STEP 01 To preheat the oven:

1. Push the control knob(s) in to start gas flowing.
2. Turn the control knob(s) counter-clockwise to activate the starter.
3. Turn the control knob(s) to HIGH.

STEP 02 once the desired temperature is reached, turn the control knob to loW for the duration of the cook time.
Turn the other control knob to OFF.

FOR BEST RESULTS:

• Always cook with door closed.
• Rotate pizza 90° (a quarter turn) when the cooking time has reached the halfway point.

HEALTHY BURNER FLAME PATTERN

1. Flickers of yellow color.
2. dark blue color.
3. Vibrant blue.

BURNER FLAMES ARE YELLOW OR IRREGULAR

If there is a sudden drop or low flame issue, please reference the Troubleshooting chapter.

COOKING ON YOUR BLACKSTONE

DANGER
Flammable items can spontaneously combust if placed near the appliance DO NOT place flammable items such as aerosol containers, oily or greasy towels near the cooking surface.
This appliance will be hot during and after use. DO NOT handle hot parts with unprotected hands. Use long-handled cooking utensils and oven mitts. NOTICE DO NOT store any items within 3 in (8 cm) of the cooking surface while in use.
IF GREASE OR OTHER HOT MATERIAL DRIPS ONTO VALVE, HOSE OR REGULATOR:
STEP 01 Turn off gas supply immediately.
STEP 02 Determine the cause and correct it. STEP 03 Clean and inspect valve, hose and regulator.
STEP 04 Perform a leak test. (Please reference the Leak Test Instructions in USING YOUR BLACKSTONE.)

HOW TO USE YOUR PIZZA OVEN
WARNING
Oven door handle gets hot while in use. Use insulated oven mitts/ gloves when opening or touching the oven door handle.

FRESH PIZZA
STEP 01  Preheat oven to 700° F (380° C).
STEP 02 Pizza cooking time is about 2-4 minutes depending on the size and thickness of the dough of the pizza. Thicker or denser foods require more time.
STEP 03 Pull out the pizza when the crust has reached your desired readiness, or when the edges of the pizza crust are golden-brown.

FROZEN PIZZAS, COOKIES, ETC.
Follow the food manufacturer’s directions on box/ recipe.
(Let frozen food thaw a little bit before putting into the hot oven. This will prevent your pizza stone from cracking.)

VIDEO RECIPES
Find recipes and cooking tips at:

BlackstoneProducts.com/blogs/recipes
youtube.com/c/BlackstoneGriddles
@blackstoneproducts

CLEANING YOUR APPLIANCE

Clean your appliance after each use, after it is cool to the touch.

• do NOT use abrasive pad on areas with graphics.
• If a bristle brush is used to clean any of the cooking surfaces, ensure no loose bristles remain on cooking surfaces prior to cooking.

WARNING
Grease build up can cause a fire. Clean any part of the appliance that gets hot and experiences grease build up after each use.

FOR EVERY SURFACE
The Blackstone degreaser and Cleaning Spray is gentle enough to clean every surface of your appliance. Use it on the cooking surface, the appliance frame, or anywhere that experiences a build up of grease.

APPLIANCE STORAGE
WARNING
DO NOT move the appliance when in use. Allow the applicant cool to 115°F (45°C) before moving or storing.

COVER FIT GUIDE
Always cover your appliance when stored outdoors.
To find a cover that will fit your appliance, visit BlackstoneProducts.com/support.

BlackstoneProducts.com/support

CLEANING YOUR PIZZA STONE
BEFORE FIRST AND SUBSEQUENT USES:
STEP 01 Set your oven to HIGH for 10~15 min to burn off residue.
STEP 02 Flip stone over when cool.

NOTICE
DO NOT use soap on the cooking stone. This will leave a soap taste in food.

CLEANING YOUR OVEN INTERIOR
Apply a strong solution of detergent and water, or use an oven cleaner with scrub brush on insides of oven lid and floor. Rinse and allow to completely air dry.
Reference the Troubleshooting chapter for instructions on cleaning the burner.

DISCONNECT THE LPG CYLINDER 1 LB (453 G)
STEP 01 ensure that the control knob(s) are turned to OFF.
STEP 02 once the appliance has cooled, disconnect the regulator from the gas line by unscrewing the collar.
STEP 03 Unscrew the lPG cylinder from the regulator.
STEP 04 Place dust cap on lPG cylinder valve outlet whenever cylinder is not in use only install the type of dust cap on cylinder valve outlet that is provided with the cylinder valve. other types of caps or plugs may  result in leakage of propane.
STORING LPG CYLINDERS

WARNING

• DO NOT put appliance in storage or travel mode immediately after use. Allow appliance to cool to touch before moving or storing. Failure to do so could result in fire resulting in property damage, personal injury, or death.
• DO NOT store a spare LPG cylinder under or near this appliance.
• DO NOT fill an LPG cylinder beyond 80% full.
  If the information above is not followed exactly, a fire causing death or serious injury may occur.

TROUBLESHOOTING

IGNITION TROUBLESHOOTING
BURNER WILL NOT IGNITE:
If ignition does not occur in 5 seconds:
STEP 01 Turn the burner control knob OFF.
STEP 02 Wait 5 minutes.
STEP 03 Repeat the lighting procedure.
If this does not work, to determine the cause, please try to ignite your appliance with a match.

MATCH LIGHTING INSTRUCTIONS
Before beginning, check for gas leaks.
STEP 01 Turn control knob to OFF position.
STEP 02 light a match (or long lighter) no shorter than 11 inches long.
STEP 03 Place the flame next to the burner.
STEP 04 Push in and turn the control knob to start gas flowing.

IF YOU CAN IGNITE YOUR APPLIANCE WITH A MATCH:

away from the burner tube, and above a burner hole.

damage to the ignition system.| Contact customer service for replacement parts.

IF YOU CAN NOT IGNITE YOUR APPLIANCE WITH A MATCH:

obstruction.

GAS FLOW TROUBLESHOOTING
BURNER FLAMES ARE YELLOW OR IRREGULAR:

• Appliance will not achieve a high heat or heats unevenly.
• Burner flames start strong, then immediately drop to low even when burner is set to high position.
• Flame height drops when a second burner is lit.
• Flames do NOT extend the full length of the burner, or only run on one side of the burner.
• Burner flames are inconsistent.

POSSIBLE CAUSES

|

SOLUTION

---|---
Obstructions in the burner, gas jets, or fuel rail.| Clean the burner, jets, and gas hose.
LPG cylinder is empty or low.| Refill or replace the LPG cylinder.
The regulator’s flow limiting device was triggered.| Reset the safety system: STEP 01 Turn OFF the appliance,
close the LPG cylinder valve, and disconnect the regulator from the LPG cylinder. STEP 02 Wait five minutes to
allow the pressure to dissipate, then reconnect the regulator to the LPG cylinder and slowly open the OPD hand wheel one half turn.
STEP 03 Ignite your appliance.
Regulator stuck in safety position.| Contact customer service for replacement parts.

A FLAME IS COMING OUT OF THE AIR GATE:

remove the obstruction.

CLEANING THE BURNER ASSEMBLY

VIDEO TUTORIAL
How to Clean Your Burner Tube

• youtube.com/watch?v=xKQTCrFCzf8

STEP 01 ensure that the gas is turned OFF at control knobs and gas supply. Remove the cooking top.
STEP 02 Carefully detach and remove the burner.

STEP 03 Clean the inside of the burner:

• Run a narrow bottle brush through each burner tube several times. (do NoT use wire brushes)
• Run a stiff wire bent into a small hook through each burner tube several times.
• Use compressed air to blow through the burner tube and out the burner ports. Check that air blows through each hole. (Wear eye protection)

STEP 04 Brush entire outer surface of burner to remove grime.
STEP 05 Clean any blocked ports with stiff wire such as an open paper clip.
STEP 06 Carefully replace burners and reattach.

• The gas rail fuel nozzle must be reengaged within the burner opening.

CUSTOMER SERVICE
Visit us online at BlackstoneProducts.com/support for assistance concerning appliance use, replacement parts, or your warranty.

CUSTOMER SERVICE HOURS:
Monday – Friday
7:00 am – 5:00 pm (MST)

This product may be covered by one or more issued U.S and/or international patents and may include patent applications pending.
For more information, please visit: BlackstoneProducts.com/patents

References

• Blackstone Recipes – Blackstone Products
• Register Product - Blackstone Products
• Support – Blackstone Products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>