Go Power GP-RVC-DIS-3 Power Trak Display User Guide
- June 13, 2024
- Go Power
Table of Contents
- Go Power GP-RVC-DIS-3 Power Trak Display
- Product Specifications
- Product Usage Instructions
- Specifications
- BATTERY INFORMATION SCREEN
- INSTALLATION AND WIRING – OVERVIEW
- INITIAL SETUP/BOOTUP
- DIFFERENT DEVICE SCREENS
- RECOMMENDED TOOLS
- SETUP
- OPTIONAL COMPONENTS
- FAQ
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Go Power GP-RVC-DIS-3 Power Trak Display
Product Specifications
DISPLAY
- Size: 3.2 inches
- Resolution: 320×240
- Touchscreen: Resistive
ELECTRICAL
- Supply Voltage: 7.5 to 76 VDC
- Max Supply Current @ 12 VDC Input: 150 mA
- Max Supply Current @ 24 VDC Input: 80 mA
MECHANICAL
- Dimensions: 4.77 x 2.84 x 0.51 inches
ENVIRONMENTAL
- Operating Temperature Range: Not specified
- Storage Temperature Range: Not specified
- Humidity: Not specified
COMMUNICATIONS
- Connectivity Range: 50 meters (unobstructed)
- WiFi Bandwidth: 2.4 GHz
Product Usage Instructions
- Installation and Wiring
- The GP-RVC-DIS-3 should be mounted as close to the battery as possible and on a wall.
- Initial Setup/Bootup
- Refer to the PowerTrak Display Manual for detailed setup instructions.
- Different Device Screens
- Note that the PowerTrak System interface may vary based on the connected devices. Consult the manual for specific settings for each compatible device.
- Optional Components
- Additional components include an RV-C Extension Cable (25ft) and a GP-Shunt Power Cable.
Specifications
DISPLAY
Size| 3.2”
Resolution| 320×240
Touchscreen| Resistive
ELECTRICAL|
Supply Voltage| 7.5 to 76 VDC
Max Supply Current @ 12 VDC Input| 150 mA
Max Supply Current @ 24 VDC Input| 80 mA
MECHANICAL
Dimensions| 4.77” x 2.84” x 0.51”
ENVIRONMENTAL
Operating Temperature Range| -20 to +50 °C
Storage Temperature Range| -30 to +70 °C
Humidity| 5-95 % RH, non-condensing
COMMUNICATIONS
Connectivity Range| 50 meters (unobstructed)
WiFi Bandwidth| 2.4 Ghz
Sold separately. Contact your Go Power! representative for more information
BATTERY INFORMATION SCREEN
| NO. | DESCRIPTION | NO. | DESCRIPTION |
|---|---|---|---|
| No. | Description | No. | Description |
| 1 | Battery Image Indicator | 6 | Input/Output Current (+/-) |
| 2 | Battery Percentage Remaining | 7 | Ah Remaining |
| 3 | Battery Temperature | 8 | Settings |
| 4 | Battery Voltage | 9 | Time Remaining |
| 5 | Input/Output Power (+/-) | 10 | Connectivity Icon |
INSTALLATION AND WIRING – OVERVIEW
The GP-RVC-DIS-3 needs to be mounted as close to the battery as possible and intended to be mounted on a wall.
INITIAL SETUP/BOOTUP
- Boot Up
- Battery Check
- Initial Setup
Press load once all devices are shown on the list
DIFFERENT DEVICE SCREENS
RECOMMENDED TOOLS
- Wrench
- Drill
- 2″ hole saw
- 2 ring terminals of appropriate size for battery cable
- Crimp tool for ring terminals
SETUP
For further information refer to PowerTrak™ Display Manual
FOLLOW THE PATH BASED ON THE PRODUCT YOU ARE TRYING TO CONNECT
Note: PowerTrak System may vary based on configured devices, refer to our manual for specific settings for compatible PowerTrak devices.
OPTIONAL COMPONENTS
LEARN HOW:
to size your system for PowerTrak™ scan to use our PowerTrak™ calculator
FAQ
- How do I access the full manual?
- To access the full manual, scan the provided QR code or visit gopowersolar.com/BMG.
- Where can I find technical tips, manuals, and support?
- You can find technical tips, manuals, and support at gopowersolar.com/BMG.
- How do I size my system for PowerTrak?
- To size your system for PowerTrak, scan the QR code provided or use the PowerTrak calculator available on our website.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>