GRACO PD202869D Bassinet Children’s High Chair Instruction Manual

GRACO PD202869D Bassinet Children’s High Chair

Product Specifications

• Brand: Graco
• Model: Bassinet
• Power Source: AC adapter
• Features: Vibration, Music and Sounds, Cry DetectionTM, White Noise

Using the Mattress Sheet

Parts Required
Piece G (mattress sheet)

Moving the Product

Warnings

• NEVER lift or move product with infant in it.
• NEVER lift product by top rail.

Instructions
Lift product by base as shown.

Product Usage Instructions

1. With the bassinet fabric pulled up, simultaneously insert both ends of one of the top rails into openings in side mounts (D).
2. CHECK that buttons on top rail tube are visible in holes in side mounts (D) as shown.
3. Simultaneously insert both ends of the other top rail tube into openings in side mounts (D).
4. CHECK that buttons on top rail tube are visible in holes in side mounts (D) as shown.
5. Pull fabric flaps over side mounts and attach to hook and loop patch.
6. Place mattress pad back in bassinet.

Using the Wall Plug

Warnings

• DO NOT place product near water or moisture. Do not use the product near possible wet areas, such as a bathtub, shower, wash basin, sink, laundry tub, swimming pool, etc.
• DO NOT use the AC adapter if it has been exposed to liquids, has been dropped, or is damaged.
• Protect the power cord. Place it where it is not walked on or pinched by furniture or other items.
• ONLY use approved Graco power adapter.
• Strangulation Hazard: Keep this cord out of the reach of children. DO NOT use with an extension cord. Use only power cord provided.

Product Usage

Warning: DO NOT place product near water or moisture. Use only approved Graco power adapter. Keep power cord out of reach of children and do not use with an extension cord.

1. Connect wall plug to cord on leg of bassinet.

Speed Indicators: Adjust speed and volume levels as needed by pressing the corresponding buttons. To turn the bassinet on, press power and select motion. Press power again to turn off. The bassinet will automatically power off after 8 hours of inactivity.

Bassinet Controls

Indicators

Speed Indicators

 Indicates the speed setting

Vibration Level Indicators

 Shows the level of vibration

Music and Sounds

 Controls music and sounds

Volume Level Indicators

 Displays the volume level

Power

 Turns the bassinet on or off

Motion

 Starts or changes the bassinet motion

Cry DetectionTM

 Indicates cry detection feature

White Noise

 Plays white noise

Volume Up

 Increases volume

Volume Down

 Decreases volume

Operating Instructions

TO TURN BASSINET ON: Press power and select motion to start the bassinet. Change speed if needed by pressing motion again.

TO TURN BASSINET OFF: Press power again to turn off. It will take a few seconds for the bassinet to return to neutral position. The bassinet will automatically power off after a period of 8 hours in which no indicators were pressed.

Buttons will auto dim after 1 minute of inactivity. Press any buttons to wake display.

Assembly Instructions

Step 1
Remove mattress from bassinet.

Step 2
To add mattress sheet, separate hook and loop tabs and insert mattress pad into mattress sheet. Place assembled mattress pad and sheet back in bassinet. See care section for cleaning.

Step 3
With the bassinet fabric pulled up, simultaneously insert both ends of one of the top rails into openings in side mounts (D).

Step 4
CHECK that buttons on top rail tube are visible in holes in side mounts (D) as shown.

Step 5
Simultaneously insert both ends of other top rail tube into openings in side mounts (D).

Step 6
CHECK that buttons on top rail tube are visible in holes in side mounts (D) as shown.

Step 7
Pull fabric flaps over side mounts and attach to hook and loop patch.

Step 8
Place mattress pad back in bassinet.

Frequently Asked Questions (FAQ)

Can I use the bassinet near water sources?

No, DO NOT place the product near water or moisture as it can be dangerous.

How do I clean the mattress pad and sheet?

Refer to the care section for cleaning instructions on how to clean the mattress pad and sheet.

How do I ensure the top rail is properly secured?

Check that the buttons on the top rail tube are visible through the holes in the side mounts to ensure it's locked in place.

What should I do if the mattress pad comes loose?

Reattach the mattress pad by placing it back in the bassinet, ensuring it's properly fitted with the fabric flaps over the side mounts.

How do I move the bassinet safely?

Always lift the bassinet by the base, never by the top rail, and ensure no infant is in the bassinet while moving it.

Can I use any power adapter with the bassinet?

No, only use the approved Graco power adapter provided with the bassinet.

How can I prevent potential strangulation from the power cord?

Keep the power cord out of the reach of children and do not use it with an extension cord. Make sure it's not placed where it can be walked on or pinched by furniture or other items.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>