GRACO 9AU100 SmartSense Soothing Bassinet Owner’s Manual

: June 14, 2024
: Graco

Table of Contents

GRACO 9AU100 SmartSense Soothing Bassinet Owner’s Manual
Failure to follow these warnings and the instructions could result in

GRACO 9AU100 SmartSense Soothing Bassinet Owner’s Manual

Failure to follow these warnings and the instructions could result in

serious injury or death.

PLEASE SAVE OWNER’S MANUAL FOR FUTURE
DO NOT use product if it is damaged or
THIS PRODUCT REQUIRES ADULT ASSEMBLY. Follow assembly instructions If you experience any difficulties, please contact the Customer Service

Department 1-800-345-4109.

SUFFOCATION HAZARD

Infants have suffocated:

In gaps between a wrong-sized mattress or extra padding and side of the bassinet, and
On soft bedding, pillows and extra
Use ONLY mattress pad provided by Graco.
NEVER add a pillow, comforter or another mattress for padding.
ALWAYS use mattress pad provided by
Product can roll over on soft surfaces and suffocate child. Never place product on beds, sofas, cushions, or other soft
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your
ALWAYS place child in the center of
FALL HAZARD: Infants have suffered head injuries falling from bassinets and swings.
To help prevent falls, STOP using this product when the infant begins to push up on hands and knees, weighs over 20 lb (9 kg) (approximately 5 months of age), or child’s head and feet simultaneously touch head and foot ends of bassinet mesh sides, whichever comes
The product must be fully assembled and installed, including 4 legs, 4 screws, 2 top rails, 2 side mounts, and mattress pad, before Always follow the instructions in the owner’s manual to set up the product.
ALWAYS provide the supervision necessary for the continued safety of your When used for swinging, never leave child unattended.
NEVER lift or move product with infant in
NEVER use product on slick

2-A Parts List • Lista de Piezas

This model may not include some features shown below. Check that you have all the parts for this model BEFORE assembling your product. If any parts are missing, call Customer Service.

Tools required (not included): Phillips Screwdriver

This model may not include some features shown below. Check that you have all the parts for this model BEFORE assembling your product. If any parts are missing, call Customer Service.

Tools required (not included): Phillips Screwdriver

ALL MODELS • TODOS LOS MODELOS

To Assemble Base • Para ensamblar la base

Base Feet • Pies de la base

Parts Required/Piezas requeridas:

Place product (B) with bassinet down as shown. Ponga el producto
(B) con el moisés hacia abajo como se muestra.

Choose base leg with
- Attach leg (A) to the mount on the bassinet with the (A) plug sticker, opposite the control panel.
- Fasten leg with screw.
Choose base leg with
Attach leg (A) to the mount on the bassinet with the (A) plug sticker, opposite the control panel. Fasten leg with screw.
Attach remaining 3 base legs (C) to remaining mounts, and fasten each with screw.
CHECK legs are assembled by pulling out on them.