DENSO TN0036A Car Audio Instruction Manual
- June 13, 2024
- DENSO
Table of Contents
DENSO TN0036A Car Audio
Rating
Button Function Spec
AUDIO controls
Radio operation procedure
ACC-ON
After the ACC-ON, confirm that the Toyota screen is displayed.
CAUTION
Note: It takes a little longer for the first time of ACC-ON.
Continue
Press the “Continue” button on the face panel after a few seconds to move the
MENU screen.
POWER
Press the POWER button. When the Radio Mode Window on the screen is pressed,
the “FM1” screen is displayed.
SEEK
Confirm that the screen is changed as below, Please push down the ”<” button
or ”>” button. This will start to SEEK.
- AM DAB
- Same as AM/DAB mode.
Operating manual (Bluetooth/Handsfree)
(ACC-ON)
After the ACC-ON, confirm that the Toyota screen is displayed.
CAUTION
The screen is changed to a “CAUTION” screen after a few seconds
Note: It takes a little longer for the first time of ACC-ON.
Continue
Press the “Continue” button on the face panel after a few seconds to move the
MENU screen.
Setting
Please press the “Setting” button on the face panel to move to the Settings
screen.
Settings” Bluetooth
Confirm if the” Settings” screen is displayed, select the ”Bluetooth” button
on the display.
Add Device
Please press the ”Add Device” button on the screen.
Search Device
Please press the ”Search Device” button on the screen.
Bluetooth（iPhone iPod)
- Confirm if the screen is changed as below,
- Please set the iPhone or iPod in pairing mode.
- Displays when you have more than one pairing equipment
iPhone iPod
- Select the iPhone or iPod to connect.
- Operate the phone after the message on the screen
Connection Completed
”Connection Completed” is displayed if completed.
Operating manual (Wi-Fi/Carplay)
(ACC-ON)
After the ACC-ON, confirm that the Toyota screen is displayed.
CAUTION
The screen is changed to a “CAUTION” screen after a few seconds.
Continue
Press the “Continue” button on the face panel after a few seconds to move
the MENU screen.
Setting
Please press the “Setting” button on the face panel to move to the Settings
screen.
Settings
Seach Apple CarPlay Device”
Confirm that the screen will change to the “Settings” screen, slide it down
and select the “Seach Apple CarPlay Device” button on the screen.
Search
- Please press the ”Search” button on the screen
- At this time, turn on Bluetooth on the iPhone to be connected.
- Please Select the connected iPhone.
- If the display looks like the one below, press the [OK] button on the product side and press [Pairing] on the iPhone side.
CarPlay
Connection is completed when the screen automatically transitions to the
CarPlay screen.
FCC Operating Manual Requirement
Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CAUTION: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment should be installed and operated keeping the
radiator at least 20cm or more away from the person’s body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>