Denso Korea FD01470 Smart Key FOB User Manual
- June 5, 2024
- Denso Korea
Table of Contents
Denso Korea FD01470 Smart Key FOB
Description of manufacturer
Trademark
- DNKR
Name and address of the manufacturer
- Name : DENSO KOREA CORPORATION
- Address : Cheomdan Industry 3, Masanhappo-gu, Changwon-si,Gyungsangnam-do, Korea
Name and address of applicant
- Name : DENSO KOREA CORPORATION
- Address : Cheomdan Industry 3, Masanhappo-gu, Changwon-si, Gyungsangnam-do, Korea
Technical description of Smart Key FOB
Type
- Model : FD01210
Specifications of Electronic Key
- Nominal frequency: 433.92MHz
- Oscillator frequency (Main IC Internal clock) : 16MHz
- Oscillator frequency (RF clock) : 27.6MHz
- Type of modulation: FSK/F1D
- Power Supply
- Nominal supply voltage : 3 VDC
- Type of Battery: One lithium battery
- Antenna: Built-in type (Fixed)
- Antenna gain: -21.62 dBi
- Antenna Type: PCB Pattern Antenna
Outline of Smart Key FOB
Smart Key FOB is mainly used for locking or unlocking the doors of vehicles.
Smart Key FOB detects signals when it reaches the vicinity of vehicle, and
sends signals using radiofrequency.
Also, Smart Key FOB sends a radio wave signal while a button is pushed. When
the button is released, the radio wave signal is automatically off within
0.196 seconds. When the button is depressed continuously, Smart Key FOB sends
a signal for a predetermined constant time.
This product sends a signal when the following buttons are pushed.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.Any changes or
modifications (including the antennas) to this device that are not expressly
approved by the manufacturer may void the user’s authority to operate the
equipment.
FCC and IC RF Radiation Exposure Statement: This equipment complies with FCC
and IC RF Radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.