CHERY LIFE L104.9 8 x 6 ft Garden Metal Garage Shed Installation Guide
- June 13, 2024
- CHERY LIFE
Table of Contents
CHERY LIFE L104.9 8 x 6 ft Garden Metal Garage Shed
Specifications
Dimensions: L104.9” x W69.5” x H89.3”
Product Information
The Garden Metal Garage Shed is a durable and spacious storage\ solution for your outdoor needs. It comes with a protective film to ensure longevity and can be easily assembled with the providedcomponents.
Product Usage Instructions
Site Selection
Avoid overhanging trees and ensure the site is leveled. Small trees, bushes, or fences nearby can act as a windbreak.
Site Preparation
Prepare the necessary tools (not included) before installation. Read the instructions carefully and check all parts before starting the installation process.
Installation Notes
Make sure colored panels face outwards and all holes match. Install panels in the specified order for stability. Tighten all screws properly. Remove the protective film after installation.
Safety Precautions
Keep the instruction manual for future reference. Ensure proper installation to prevent accidents.
FAQ
- Q: What should I do if I encounter missing parts during assembly?
- A: Contact our customer service with your order details and we will assist you with the missing parts.
- Q: Can the shed be painted to match my outdoor decor?
- A: Yes, you can paint the shed with suitable outdoor paint to match your preferences.
- Q: How should I clean the shed for maintenance?
- A: Regularly clean the shed with mild soap and water to maintain its appearance and durability.
Product Information
Thank you for choosing us!
Please let us know if you have any concerns.
The product comes in two cartons. Please install in a levelled place.
- CHERY LIFE
- www.cherylife.com
- E:info@cherylifeus.com
Site Selection
Avoid overhanging trees as much as possible as leaves will make regular cleaning necessary and broken branches are a potential hazard. l Small trees, bushes or fences nearby can be helpful, acting as a windbreak
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking with a spirit level is required. The base can be constructed by treated \timber or concrete, in order to stop moisture getting into the shed. The shed is not designed to be built onto lawn directly.Also the ground will get muddy during rainy days. If a concrete pad is made, it is important that this slopes towards the edges to prevent water ingress. Time must be allowed for any concrete or cement to dry before building the shed on top. Bases can also be constructed from bricks, blocks,or mounted on a concrete pad. The bricks or blocks should be cemented onto firm and level concrete footings.
Please prepare below tools before installation. (Not Included)
ATTENTION:
- Please read this instruction carefully before installation and follow it strictly during installation.
- Ensure that there are no problems later due to installation errors.
- We have prepared extra screws for you to use in case of loss or damage.
- If you can not finish installation within one day, pls do fix the anchor bolts first to prevent heavy wind blow away. Many cases already occurred pls do be careful.
Installation Notes
Please check the quantity of all parts before installation (refer to the Parts\ Lists) and the appearance of the products. Make sure the product is correct before installation. Make sure the colored panels are facing outwards and all the holes match. The panels are textured, please install the panels in the order specified in the instructions. All lines and holes should be matched to make the storage shed more stable. Please ensure that all screws are tightened to prevent the product from falling apart. There is a protective film on the surface to protect the product, you can tear it off after installation. If you do not damage the film during installation, it can also remain on the product to protect. Please place the product on a flat ground to prevent leaning and collapse. If the ground is uneven, the door may can’t be closed.
Safety Precautions
We recommend two adults to complete the installation. Two adults installed together will make the installation process easier and safer. The gloves must be carried to prevent hand cuts during installation. Take care when using power tools near water the use of a residual current device (RCD) is advised. Please use the electric driver carefully during screwing to prevent the screw from slipping and hurting your hand. Be careful not to fall when installing the roof. Please steady the ladder and make sure the product is placed on a flat ground.
PLEASE KEEP THIS INSTRUCTION FOR FUTURE REFERENCE.
Component List
Assembly Instruction
Base Frame Assembly
- Connect 4L, 4R, and 1 with F1 screws;
- Connect 14 to 4L, 4R, and fix 1 with F1
Foundation Assembly
- Fix two sets of H1L and H1R with F1;
- Connect H1L, H1R to 1 and fix them with F1
- Install H2 onto H1L, H1R, 4L, and 4R and secure with F1
Wall Assembly
Window Assembly
Roof Assembly
Right Door Assembly
Left Door Assembly