CHERY LIFE T-20 Portable Freezer Car Refrigerator Datasheet

: June 12, 2024
: CHERY LIFE

Table of Contents

T-20 Portable Freezer Car Refrigerator
Specifications:
Product Usage Instructions:
1. Installation and Setup:
2. Operation:
3. Troubleshooting:
- FAQ:
Q: What should I do if my refrigerator shuts down due to
Q: How do I ensure proper ventilation for the

T-20 Portable Freezer Car Refrigerator

“`html

Specifications:

Model: T-20 For Model 3
Capacity: 20L
Power: DC12/24V

Product Usage Instructions:

1. Installation and Setup:

Download and install the Tesla Fridge APP from the APP Store or
Google Play.

Ensure the vehicle’s Sentinel Mode is turned on to maintain
power output for the refrigerator.

Replace the matching partition with the cover plate of the trunk
box for better heat dissipation and ventilation.

2. Operation:

Remove the matching partition when the refrigerator is fully
loaded or during prolonged outdoor parking to prevent
overheating.

If the temperature inside the cabin reaches above 50°C, the
refrigerator will automatically shut down for protection.

3. Troubleshooting:

If the fan does not work or works abnormally, reduce the working
environment temperature, turn off the equipment for at least 5
minutes, and check the fan for abnormalities. If the issue
persists, contact a service center for assistance.

If the ambient temperature is too high, check the fan and ensure
proper ventilation for heat dissipation.

FAQ:

Q: What should I do if my refrigerator shuts down due to

overheating?

A: Reduce the working environment temperature, turn off the
equipment for at least 5 minutes, and check the fan for
abnormalities. If the issue persists, contact a service center for
assistance.

Q: How do I ensure proper ventilation for the

refrigerator?

A: Replace the matching partition with the cover plate of the
trunk box to facilitate ventilation and heat dissipation.

“`

Cherylife.com
T-20 For Model 3
For Model 3
Tesla Fridge APP
You can also search for Tesla Fridge on the APP Store or Google Play to download and install the Fridge APP

After parking, refrigeration/freezing is still required. Please turn on the vehicle’s “Sentinel Mode” to ensure that the output will not power off, allowing the refrigerator to continue working.
In order to ensure the normal operation of the refrigerator and better space for heat dissipation, replace the matching partition with the cover plate of the trunk box to facilitate the ventilation.
It is recommended to remove the matching partition when the refrigerator is fully loaded or in prolonged outdoor parking and exposure to sunlight, or turn on the vehicle overheating protection mode to prevent frequent overheating protection of the refrigerator (the temperature inside the cabin reaches above 50C, it will automatically shut down for protection.

6 6
10.1 Electronic Schematic 10.2 Product characteristic parameters

CB

For user manual,add following comment.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the eguipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.”
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions(1) this device may not cause interference,and (2) this device mst accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) I’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l’exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.

8

1

2

1

3

1

4

1

5

1

Ventilation cover plate Absorbent towel

2 9

11

NOTE:MAX Mode Can be Adjusted -22¥/-7.6 to 10¥/50and the ECO Mode be Fixed 4¥/39.2.
12

13

14

15

16

17

18

T
The battery H/M/L protection function is set too high
19

Compressor speed is too low

The fan does not work or works abnormally
The ambient temperature is too high,the internal pipeline is highest pressure to blocked or the compressor operates abnormally
The ambient temperature is too high,the internal pipeline is highest pressure or the compressor operates abnormally

Reduce the working environment temperature of the refrigerator,turn off the equipment for at least 5 minutes,and then restart it, and check the fan does not works abnormally.If the problem persists,you need to authorize a service center to check it.

The ambient temperature is too high

The fan is not work or works abnormally

Check the fan and process according as F3.

Environment temperature too high

The space is too closed, or the air duct is blocked, and the heat dissipation is poor

Evacuate confined Spaces and reduce the ambient temperature around the device

20

21

10.1 Electronic Schematic

NTC
FUSE

+- P0WER DC12/24V

+-

F+

DC FAN

F-

Set

–

LED

D

White

C

Orange

P

Black Red

T

Compressor

10.2 Product characteristic parameters
T-20 20L

Battery protection voltage gear parameter table:

Gear setting

DC12V

Start-up Voltage

Shut-down Voltage

DC24V

Start-up Voltage

Shut-down Voltage

H

12.6±0.3 11.8±0.3

26.2±0.3

24.6±0.3

M

12.2±0.3 11.4±0.3

25.3±0.3

24.1±0.3

L

11.4±0.3 10.1±0.3

23.0±0.3

21.5±0.3

Notice 1.When the input voltage is lower than the shut-down voltage,F2 is
displayed. 2.When the input voltage is higher than DC17.0V or DC31.5V, F2 is
displayed.

22

23

5005.000.0161
Thanks for choosing CheryLife Tel: +1 888-589-8148
Email: info@cherylifeus.com http://www.cherylife.com
Office Address: 61 Commercial Ave, Garden City, NY, US, 11530
24