SEALEY VS8113 Ø8mm Wi-Fi Borescope Instruction Manual

: June 4, 2024
: SEALEY

Table of Contents

SEALEY VS8113 Ø8mm Wi-Fi Borescope
IMPORTNAT INSTRUCTION
SPECIFICATION
OPERATION
MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY VS8113 Ø8mm Wi-Fi Borescope

SEALEY VS8113 Ø8mm Wi-Fi Borescope - Copy

IMPORTNAT INSTRUCTION

GENERAL SAFETY

Always perform automotive testing in a safe environment.
Keep your work area clean and well lit.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
Operate the tool in a well-ventilated work area.
DO NOT operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
DO NOT use the tool around corrosive chemicals which can damage the tool.
DO NOT abuse the flexible cable. Never use the flexible cable to carry the tool.
DO NOT drop the borescope, it is not shock proof.
Keep bystanders and children away while operating the tool.
Keep the tool dry, clean, free from oil, water and grease.
The handheld display unit is NOT waterproof.
Handle the borescope with care. If it is dropped, check for breakage and any other conditions which may affect its operation.
DO NOT immerse the imager head and cable into corrosive substances, petroleum or oil.
DO NOT use near moving machinery.
DO NOT use excessive force to insert or withdraw the imager head or cable.
DO NOT use the tool while tired or under the influence of drugs, alcohol, or intoxicating medication.
DO NOT over-reach. Maintain proper footing and balance at all times.
DO NOT use the tool for personal or medical use in any way.

CHARGING SAFETY

Use only the supplied charger.
Allow clearance all around the charger to allow cooling.
Disconnect the charger from the electrical supply when not in use.
DO NOT charge in an explosive atmosphere or in the presence of flammable material.
DO NOT leave camera unattended whilst recharging.
DO NOT exceed the maximum charging time.

The warnings, precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

INTRODUCTION

Ø8mm Wi-Fi Borescope, compatible with iOS, Android and Windows operating system. IP67 Rated camera and cable up to LED light control switch. Up to 720HD resolution. 2m Pixel camera with 6 LEDs and a 800mAh battery. The kit includes charging cable, hook, magnet and side mirror. Cable length of 5m. Transmission distance within 5-30m.

SPECIFICATION

Model:………………………………………………………………VS8113
Camera Probe Length:……………………………………………… 5m
Camera: …………………………………………………………. Ø8.0mm
Pod Length: ……………………………………………………….. 45mm
Power Source: ……………………………………….800mAh Battery
Record Function (Video + Still) …………………………………. Yes
Screen Resolution:…………………………640 x 480, 1280 x 720
Viewing Angle: …………………………………………………………700
Accessories ……………450 Mirror, Magnetic Pick-up and Hook

OPERATION

BATTERY CHARGING

Insert the USB plug into the charging port then plug the other end into a suitable power socket.
When charging commences, the battery charging indicator will light red.
When the charge is complete, the charging indicator will turn off.
When charging is complete, disconnect the charging lead from the power supply and from the charging port.
When connected to a wireless signal, the WiFi Indicator will show green.

SOFTWARE FOR BORESCOPE

For an IOS device use APP Store to download the “WiFi Check” application and install it.
For an Android device, use Google Play to download the “WiFi Check” application and install it.
For a PC, download the software from http://app.joyhonest.com/wifi_check_pc.html and install it.
Connect borescope as fig.2 and turn on using On/Off button
Search for the WiFi signal “ WiFi Check” on your device and connect to it.

RUNNING THE SOFTWARE

Open the installed software and start real-time viewing.
Use the software controls to set up and record your work.
Control options
Image brightness can be altered using the roller switch

MAINTENANCE

CLEANING
DO NOT use abrasive or solvent cleaners. Use a mild detergent on a soft cloth, taking care not to put excessive pressure on the display screen.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.

Note : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

Important:

No Liability is accepted for incorrect use of this product.

Warranty :

Guarantee is 12 months from purchase date, proof of which is required for any claim.

NEED HELP

ealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR