PPNEST SolarCam P1 Solar-Powered Wireless Security Camera User Guide

PPNEST SolarCam P1 Solar-Powered Wireless Security Camera

Specifications :

• Model: Solar-Powered Wireless Security Camera 22PGUV5QNCT%CO2
• Local Storage: Supports Micro SD Card up to 128GB (class10, FAT32 format)
• Power Source: Solar Panel with USB-C Charging Cable
• Connectivity: Wi-Fi
• Max Detection Range: Up to 10 meters
• App: PPsmart (Available on App Store and Google Play)

Product Overview:
The PPnest SolarCam P1 is a solar-powered wireless security camera designed for easy installation and setup. It features status LED, infrared LEDs/spotlights, USB-C port, speaker, and microphone for enhanced functionality.

Setting Up the System:

1. Download the PPsmart app from the App Store or Google Play.
2. Register an account on the PPsmart app by entering your email address, verification code, and creating a password.
3. Open the PPsmart app, click on the “+” icon, select “Add Device,” and choose “SolarCam P1.”
4. Follow the on-screen instructions to connect the camera to your Wi-Fi network.

Mounting the Camera:
Hang the camera 2-3 meters above the ground to maximize the motion sensor’s detection range. Avoid direct sunlight to prevent interference.

Tips for Solar Panel Installation:

1. Position the solar panel facing south in the northern hemisphere and north in the southern hemisphere.
2. Avoid obstructions like eaves or tree branches that could block sunlight.

Installation Instructions:

1. Drill holes according to the position sticker using a 15/64” (6mm) drill bit.
2. Insert wall anchors and tighten screws securely.
3. For solar panel installation, attach the locking screw cap to the universal joint and secure it with the circular socket nut.
4. Screw the universal joint into the back of the solar panel and tighten it firmly.

FAQ :

• Q: What should I do if the camera does not connect to Wi-Fi?
  A: Ensure that you have entered the correct Wi-Fi credentials and are within range of a stable Wi-Fi signal. Try restarting both the camera and your router before attempting to reconnect.

• Q: Can I use a different brand of micro SD card with the camera?
  A: It is recommended to use a class10 micro SD card with a capacity between 8GB to 128GB formatted in FAT32 for optimal performance and compatibility.

Solar-Powered Wireless Security Camera
Quick Start Guide

• service@ppnest.com
• https://ppnest.com

PPnest Care

Hi Customer
Thank you for choosing PPnest products. We have always put our customers first and foremost.
There are 3 things you should know before using this product：

1.  Select 2.4G Wi-Fi
   The product only supports 2.4G Wi-Fi, please select 2.4G Wi-Fi when setting up the app.

2.  Select installation location.
   Please use your mobile phone to test the coverage of the home Wi-Fi signal at the planned installation position before installation, so that the product can receive a better signal.

3.  Micro SD Card and Cloud Storage Service
   If you don’t have a Micro SD card, it’s ok. You can subscribe PPsmart cloud storage service in the app, no worrying about loss of video due to device or Micro SD card corruption.

What’s Included

PPnest SolarCam P1

Solar Panel

Product overview

• CAUTION : Please insert the Micro SD Card according to the direction shown in the diagram. Micro SD Card might JAM if inserted incorrectly and device could be damaged.
• Micro SD Card Port: Support Micro SD Card for local storage (Max 128GB). Reset button: Press and hold the button for 3 seconds, and then the device will be ready to be connected.
• Card capacity requirements: 8-128GB.
• Read and write speed requirements: class10 level.
• File format : FAT32.

Setting Up the System

1.  Download the PPsmart app from App Store or Google Play.

2.  Register an account on your PPsmart app.

   • STEP 1.
     Enter your email address.

   • STEP 2.
     Enter the verification code and create a password.

   • Open PPsmart app, click“+” on the top right corner of the page ,“Add Device” then select“ SolarCam P1”.

   • Make sure the indicator is flashing or a prompt tone is heard, then press “Next”.

   • Enter wifi name and password, then press “Next”.

   • Scan the QR Code on your phone with camera. Heard a prompt tone, then press “I Heard a Prompt”.

   • Wait for the network configuration completing.

   • Please refer to the specific app interface if there are any difference.

Select Height and location
Hang Camera 2-3meters above the ground. This height maximizes the detection range of the motion sensor of Camera. Avoid placing Camera under direct sunlight.

Installation instruction of solar panel

1. Keep the installation angle of solar panels about 30-45° with the horizontal plane, as shown in the picture below.
2. The installation between the solar panel and the camera is shown in the following figure (open up the silicone cover at the bottom of the camera, remove the small center part of the cover, insert the power cord through the opening and plug it into the USB-C Port and then close the cover taking up any slack in the power cord from the solar panel) .

Tips for the installation of solar panel

1. When installing in the northern hemisphere, face the panel to the south, and when installing in the southern hemisphere, face the panel to the north.
2. Take care to install the solar panel so that the sun is not blocked by any items such as eaves, trees branches, etc.

Test the Wi-Fi signal at installation position
Use cell phone to test Wi-Fi signal quality at the installation position before installing camera, make sure the Wi-Fi router can provide good Wi-Fi signal.

Installation

1. Drilling according to position sticker, drill bit: 15/64”(6 mm).
2. Insert the plugs.
3. Tighten the screws.

What is required:

Installation instruction of solar panel
Place Solar Panel in an area with consistent sunlight throughout the year .It only needs a few hours of direct sunlight each day to keep your camera powered.
The amount of energy that the solar panel produces is affected by weather conditions, seasonal changes, geographic location, etc.

1. Fix the base to your mounting location using the included screws. If the installation surface is soft or unstable, first use a φ6.0 drill bit to drill a hole in the wall ,then insert the anchor nail into the hole, and fix the base with screws.

2.  First, install the locking screw cap into the universal joint and then screw the circular socket nut into the universal joint.

3. Screw the universal joint into the back of the solar panel. Tighten it firmly with the attached nut.

4.  Screw the locking screw cap into the base. Make sure that the universal joint is angled upward.

5. When adjusting the solar panel left or right, loosen the locking screw cap, turn the sleeve rod, and tighten the locking screw cap when the panel is in position.

6. Solar panel’s angle can be adjusted up and down up to 90°.

7. Tip: After the installation is complete ,please check that all locking mechanisms are tightly secured.

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

• This product complies with the radio interference requirements of the European Community.
• Declaration of Conformity
• Hereby, Aosu declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
• For the declaration of conformity, visit the Web site: https://www.ao-sulife.com.
• This product can be used across EU member states.
• Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.
• The suitable temperature for Camera and accessories is -10°C—50°C.
• RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with
• RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
• This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
• • This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Customer Service

Warranty

• 12-month limited warranty (The actual warranty period shall be implemented according to the requirements of local laws and regulations）
• Email Us
• Customer Support: https://ppnest.com
• Email : service@ppnest.com

References

• PPNEST
• SuLife.com is for sale | HugeDomains
• PPNEST

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>