PPNEST P1PRO Solar-Powered Wireless Security Camera User Guide

: June 12, 2024
: PPNEST

Table of Contents

P1PRO Solar-Powered Wireless Security Camera
PPnest Care
What’s Included
Product overview
Setting Up the System
Mounting the Camera
Setting Up the System
Setting Up the System
Select Height
FCC Statement
IC RF Statement
Declaration of Conformity
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

P1PRO Solar-Powered Wireless Security Camera

Specifications

Model: HS9AI|Q
Color: Black
Material: High-grade plastic
Dimensions: 10cm x 5cm x 3cm
Weight: 100g

Product Usage Instructions

Getting Started
Before using the HS9AI|Q, ensure it is fully charged. Connect the device to a power source using the provided cable.

FAQ (Frequently Asked Questions)
Q: How do I reset the device?
A: To reset the HS9AI|Q, locate the reset button on the back of the device and press it with a paperclip for 5 seconds.

PPnest Care

Hi Customer
Thank you for choosing PPnest products. We have always put our customers first and foremost.
There are 3 things you should know before using this product:

Select 2.4G Wi-Fi
The product only supports 2.4G Wi-Fi, please select 2.4G Wi-Fi when setting up the app.t
Select installation location.
Please use your mobile phone to test the coverage of the home Wi-Fi signal at the planned installation position before installation, so that the product can receive a better signal.
Micro SD Card and Cloud Storage Service
If you don’t have a Micro SD card, it’s ok. You can subscribe PPsmart cloud storage service in the app, no worrying about loss of video due to device or Micro SD card corruption.

service@ppnest.com

https://ppnest.com

What’s Included

PPnest SolarCam P1 Pro

Scan the QR Code on your phone with camera. Heard a prompt tone,then press”I Heard a Prompt”.

Product overview

CAUTION: Please insert the Micro SD Card according to the direction shown in the diagram. Micro SD Card might JAM if inserted incorrectly and device could be damaged.

Micro SD Card Port: Support Micro SD Card for local storage (Max 128GB).
Reset button: Press and hold the button for 3 seconds, and then the device will be ready to be connected.
Card capacity requirements: 8-128GB.
Read and write speed requirements: class10 level.
File format: FAT32.

Setting Up the System

Download the PPsmart App from the app Store (iOS devices) or Google Play (Android devices).

Sign up for an PPsmart app account, then follow the onscreen instructions to complete the setup.

Mounting the Camera

Find a Good Mounting Spot
To find a spot to mount Camera, you need to test wireless signal strength.

Open the PPsmart app, go to Camera Settings> Quick Start.
To test the wireless signal strength, take your camera and phone to the location where you want to mount the camera.
Move the camera as close to the Wi-Fi Router as possible to get a better signal.

Setting Up the System

Register an account on your PPsmart app.

STEP 1.
Enter your email address.
STEP 2.
Enter the verification code and create a password.

Setting Up the System

Open the PPsmart app,click”+”on the top right corner of the page ,”Add Device” then select”SolarCam P1 Pro”.

Make sure the indicator is flashing or a prompt tone is heard.then press “Next”.

Enter wifi name and password, then press “Next”. Scan the QR Code on your phone with camera. Heard a prompt tone,then press”I Heard a Prompt”.

Wait for the network configuration completing.

*Please refer to the specific app interface if there are any differences.

Select Height

Hang Camera 2-3 meters above the ground. This height maximizes the detection range of the motion sensor of Camera.

Select Location

When installing in the northern hemisphere, face the camera to the south, and when installing in the southern hemisphere, face the camera to the north.
Take care to install the camera so that the sun is not blocked by any items such as eaves, trees branches, etc.

Test the Wi-Fi signal at installation position
Use cell phone to test Wi-Fi signal quality at the installation position before installing camera, make sure the Wi-Fi router can provide good Wi-Fi signal.

Installation

Drilling according to position sticker, drill bit: 15/64″(6 mm).
Insert the plugs.
Tighten the screws.

What is required:

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Statement

This equipment complies with IC RSS – 102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Cet equipement est conforme aux limites d’exposition aux radiations IC CNR – 102 etablies pour un environnement non contr6Ie. Cet equipement doit etre installe et utilise avec une distance minimale de 20 cm entre le radiateur et votre corps.

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, aosu declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://ww-w.aosulife.com This product can be used across EU member states. Do not use the Device in an environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for Camera and accessories is -10°C—50°C. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use product that maintain a 20cm distance between the device and the human body.

This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Customer Service