HATOR Arc X Gamer Chair User Guide

HATOR Arc X Gamer Chair User Guide

PACKAGE CONTENTS

If you encounter problems during installation, don’t hesitate to contact us for additional installation instructions

Do not attempt to adjust this lever until the backrest is installed. It will help you avoid the improper operation of the mechanism and injury of the hand.

1. Remove all chair parts from the box without touching the backrest adjuster (the mechanism is on the seat). Before assembling, please check all parts by the checking list.
   

2. Take the base and insert the five wheels into the designated holes.
   

3. Place the assembled base on the floor and insert the gas lift with the button up. Please put on the gas lift cover on it.
   

4. Remove the 16 pre-installed screws using the supplied screwdriver.
   

5. Fix the two armrests to the seat base using M8x25 mm screws.
   

6. Install the side handles on the bar of the multi-block mechanism (if not installed).
   

7. Fix the multi-block mechanism underneath the seat base using M8x25 mm screws. There should be soft pads between the mechanism and the seat. Pay attention to the “FRONT” mark on the multi-block mechanism. The front of the mechanism should be facing forward.
   

8. Install the assembled seat on the gas lift. Ensure the gas lift fits securely into the hole in the multi-block mechanism.
   

9. Install the backrest and fix it with MBx25 mm screws on the left and right sides. Start locking from the side of the backrest recline mechanism (right hinge)
   

10. To get the most out of using our magnetic side covers, please remove the transportation screws from both sides. For further chair ‘s transportation please insert these screws back or take the magnetic side covers off prior.

11. 

12. Put the magnetic top cover on both sides.

13. 

14. Place the cushions for head and lumbar support by snapping them on the back.
    

BACKREST ADJUSTMENT
Fully pull the lever up and slowly redine the backrest backward to the desired position, When the desired backrest angle is reached. skwly release the lever.

4D ARMREST ADJUSTMENT
Press and hold the designated buttons to adjustthe armrests height, rotation, and position in front, back, or sides directions,

MULTI-BLOCK ADJUSTMENTS
The swing mode can be adjusted according to your weight. If the chair does not swing, turn the handle under the seat clockwise or counterclockwise, adjusting the swing stiffness to suit you. If the swing stiffness is adjusted corectly, you can swing easily.

CHANGING THE DISTANCE BETWEEN ARMREST
You can change the distance between the armrests. Loosen the MB screw at the bottom of the armrest and move the armrest to the desired position, then tighten the screw in the selected position.

SWING MODE ADJUSTMENT
Right lever: pull up to adjust the seat height. Left lever: lock or unlock swing mode

IMPORTANT TERMS OF USE

1. This chair is intended solely for its intended use.
2. Do not step on the chair or use it as a ladder as it may tip over.
3. When using on a hard floor, be sure to place a mat under the chair to avoid damaging the floor surface.
4. Use the product on a horizontal surface.
5.  This chair is designed for one person use.
6. Move the chair carefully.
7. Do not place the chair near heat sources to avoid surface damage and fire.
8.  Avoid direct sunlight on the surface of the chair for a long time.
9. It is strictly forbidden to use the chair in places where flammable items are stored or in rooms with high humidity.
10. Wipe clean with a soft dry cloth and do not use aggressive detergents.
11. It is forbidden to knock out and disassemble the gas lift and other parts 12. Sit with your clothes on. Avoid getting sweat on the upholstery of the chair.

IMPORTANT

Sit in the center of the seat Lean back on the backres
Do not sit on the front edge of the chair
Don’t step on a chair
Do not sit on the chair together
If the person is reckning in the chair, kaning back, do not move the chair
the person is reclining in a chair, kaning back, do not overtum the chair
Do not shift the center of gravity to the back
Do not insert your hand into the backrest adjustment mechanism
Sit with your clothes on, Avoid getting sweat on the upholstery of the chair

ArcX Arc X Fabric Gaming Chair User Manua

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>