SEAPISODE 20-22FT 900D Ski and Wakeboard Tower Boat Cover Instructions
- June 1, 2024
- SEAPISODE
Table of Contents
SEAPISODE 20-22FT 900D Ski and Wakeboard Tower Boat Cover
CAUTION
If your boat is new or has recently changed to new boat accessories, it is not
recommended to use this product within the first four weeks of ownership. Some
compounds used in new boats can release gases that can cause the dyes in boat
covers to transfer to the boat, potentially staining the boat or its
components. Boat covers can be safely used after this introductory period.
INSTALLATION
- Locate the sewing tab labeled “Front” and align it with the front of the boat. Make sure the sewn tab is on the front of the boat. Open the hook and loop fastener on both sides and hook the front of the cover over the bow.
- Pull the cover onto the boat, making sure the cover evenly covers all sides of the entire hull.
- Adjust the position of the boat cover to the most suitable state, and tightly fit the hook and loop fastener and the paddling pole to ensure a firm connection and a tight fit of the hook and loop fastener. (As shown in Figure 1)
- Secure the cover securely to the boat. First, use a short strap, go around the tow bar (Picture 2), connect the metal ladder lock to the quick-release strap, tighten it, and adjust the position (Picture 3). Failure to do this correctly will cause the straps to loosen during use.
- The long webbing is fastened around the entire hull through the other end of the eye-shaped buckle. (As shown in Figure 4)
- Tighten all straps and adjust their length as needed for a snug fit. If using while towing, be sure to check that the cover is securely installed after the first mile.
CLEANING AND CARE
Proper care will extend the life of your boat cover. If your boat cover becomes dirty it can be cleaned with lukewarm water and a soft brush. DO NOT USE SOAP-it can damage the protective coatings on your cover.
STORAGE
Be sure your cover is completely dry before you store it for any extended
period.
TRAILERING
To use your Boat Cover when trailering you MUST use all the included straps-
failure to do so will invalidate your warranty. Be sure to check that all the
straps are tight and firmly attached. After driving the first mile, stop and
check your cover to ensure that all straps are secured correctly.
AFTER-SALE SERVICES
If there is any question, please contact us through
service@seapisode.com and we will provide
support within 24 hours.
Product Specifications
- Product Name: Ski&WakeboardTower Boat Cover
- Usage : Boat cover for ski/wakeboard towers
- Material : Durable fabric
- Includes : Hook and loop fasteners, paddling pole, straps, buckles
- Usage Conditions: Not recommended for new boats within the first four weeks of ownership
FAQ
Q: Can I use the boat cover on a new boat immediately?
A: It is not recommended to use the boat cover on a new boat within the first four weeks of ownership due to potential dye transfer issues.
Q: How should I clean the boat cover?
A: Clean the boat cover with lukewarm water and a soft brush. Avoid using soap as it can damage the protective coatings.
Q: What should I do before storing the boat cover?
A: Ensure the boat cover is completely dry before storing it for any extended period to prevent mold or mildew.
What should I do if I have questions or need support?
Contact us atservice@seapisode.com, and we will provide support within 24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>