BUNN Premia Bean To Batch Medium to High Volume Brewer 208-240V Instruction Manual

: June 12, 2024
: BUNN

Table of Contents

Premia Bean To Batch Medium to High Volume Brewer 208-240V
Specifications
Product Information
Product Usage Instructions
Filling Coffee Bean Hoppers
Product and Recipe Setup
Q: What should I do if my brewer malfunctions during

Premia Bean To Batch Medium to High Volume Brewer 208-240V

“`html

Specifications

Product Name: PremiaTM Coffee Brewer
Type: Bean-to-Batch Medium to High Volume Brewer
Manufacturer: Bunn-O-Matic Corporation
Warranty: 1 year parts and labor

Product Information

The PremiaTM Coffee Brewer is a high-quality bean-to-batch
brewer designed for medium to high volume usage. Manufactured by
Bunn-O-Matic Corporation, this coffee brewer comes with a 1-year
warranty covering parts and labor.

Product Usage Instructions

Filling Coffee Bean Hoppers

Open the designated coffee bean hopper lid.
Pour the desired amount of coffee beans into the hopper,
ensuring not to overfill.
Close the hopper lid securely to prevent any spills or
contamination.

Product and Recipe Setup

Product Setup

Connect the brewer to a power source following the voltage
specifications outlined in the equipment operations manual.
Fill the water reservoir with clean, filtered water up to the
recommended level.
Power on the brewer and allow it to warm up to the desired
brewing temperature.

Grinder Calibration

Refer to the grinder calibration section in the user manual for
detailed instructions on calibrating the grinder settings for
optimal coffee brewing.

Recipe Setup

Select the desired brewing recipe on the brewer’s control
panel.
Adjust the coffee strength and batch size settings according to
your preference.
Initiate the brewing process and monitor the extraction for
quality control.

FAQ

Q: What should I do if my brewer malfunctions during

operation?

A: In case of any operational issues, refer to the
troubleshooting section of the user manual or contact Bunn-O-Matic
Corporation’s technical service at 1-800-286-6070 for
assistance.

“`

PremiaTM Coffee Brewer
Bean-to-Batch Medium to High Volume Brewer

PROGRAMMING MANUAL
For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.

Bunn-O-Matic Corporation
Post Office Box 3227, Springfield, Illinois 62708-3227 Phone 217-529-6601 | Fax 217-529-6644
00000.0000 A 8/23 © 2023 Bunn-O-Matic Corporation

www.bunn.com

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corporation (“BUNN”) warrants the BUNN Sure Immersion system, further described below for a warranty period of 1 year parts and labor.
These warranty periods run from the date of installation. BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at 217-529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. Additionally the following is excluded from the warranty period.
Warranty Exclusions: Parts such as, but not limited to, hoppers and lids, drip trays, and plastic parts damaged due to improper handling or cleaning agents.
Replacement of wear items such as, but not limited to, O-rings, gaskets, tubes, brew box seal, hoses, and valve seats.
Repairs made necessary due to poor water quality, such as dispense valves, coils, water inlet valves, scaling in hot water boilers.
Improper voltage, (See equipment operations manual for voltage specifications)
Touch screen due to improper use or damage.
Failure to perform cleaning procedures constitutes improper maintenance.
Failure to have required preventive maintenance performed by a BUNN technician or an authorized BUNN service agent.
Parts replaced under the terms of this warranty carry the remainder of the machine’s parts warranty term, or 60 days, whichever is greater.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
2

CONTENTS
Warranty ……………………………………………………………………….. 2 Filling Coffee Bean Hoppers …………………………………………… 4 Product and Recipe Setup
Product Setup …………………………………………………………….. 5 Ginder Calibration ………………………………………………………. 7 Recipe Setup ……………………………………………………………. 12
– Editing Coffee Recipes by Size ………………………………14 Enabling Products………………………………………………………. 16 Hopper Setup………………………………………………………………17 Operating Interface User Interface ……………………………………………………………. 19 ADA Interface…………………………………………………………….. 21 Machine Settings Temperature ……………………………………………………………… 23 Bean Hopper …………………………………………………………….. 25 Grounds Bin ……………………………………………………………… 26 Hot and Ambient Water ………………………………………………. 26 BUNNlink …………………………………………………………………. 27 Energy Saver ……………………………………………………………. 27 Scheduler …………………………………………………………………. 27 Service Information ……………………………………………………. 28 Factory Reset ……………………………………………………………. 28 Exporting Data Using USB Setup of Multiple Machines …………………………………………. 29 Copying Settings from Machine to Machine ………………….. 31 Importing Data Using USB Adding To Your Brand ………………………………………………… 33 Accessing Imported Images & Videos ………………………….. 37
TABS – Home Screen……………………………………………………… 38 – Size Selection Screen …………………………………………..41 – Ending Sequence ……………………………………………….. 42 – Screen Saver ……………………………………………………… 44 – Brew Video ………………………………………………………… 45 – Add …………………………………………………………………… 46 – Import………………………………………………………………… 46 – Export ……………………………………………………………….. 48 – Reset ………………………………………………………………… 48 Reminders Cleaning …………………………………………………………………… 50 Preventive Maintenance………………………………………………. 51 Water Filter………………………………………………………………… 52
3