LAP RB0258A Outdoor LED Solar Floodlight With PIR Sensor Instruction Manual
- June 5, 2024
- LAP
Table of Contents
LAP RB0258A Outdoor LED Solar Floodlight With PIR Sensor
Walking direction
- High Sensitivity
- Reduced Sensitivity
Aim the sensor across the path
Protect from rain
Avoid aim to the moving objects
WHAT IS INBOX
Avoid installing around the heat sources (ie. Air vents, heater…)
Aim to the desired area
Avoid reflected surfaces (i.e. Mirror, windows, metal)
Mount the sensor perpendicular to the ground
Installation
Use
To ensure proper product operation, the batteries must first be fully charged
for two days MINIMUM . To do this, the product has to be turned off the first
two days.
Time
**Lux
**
**Care
**
Maintenance
Guarantee
- We take special care to select high-quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product LAP has a manufacturer’s guarantee of 3 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.
- To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second-hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original period guarantee period.
- This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.
- This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labour etc), or direct and indirect damage.
- If the product is defective, we will, within a reasonable time, replace or refund.
- Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee-related queries should be addressed to the store you purchased this product from.
- The guarantee is in addition to and does not affect your statutory rights.
Troubleshooting
| Symptom | Possible Cause | Solution |
|---|
Light does not switch on when there is movement in the coverage area
| The power switch is turned off.| Check that the power is switched ON
The sensor is aimed in the wrong direction. Detection zone not properly
targeted| Re-aim the sensor to cover the desired area
Another light source is causing the unit to think it is daylight.| Turn off
surrounding lights
The light comes on for no apparent reason.
| Wind is moving trees and bushes in the detection zone| Relocate the unit
Cars in the street are being detected| Relocate the unit
Reflective objects (such as swimming pool) in the coverage area.| Relocate the
unit
Unit is sensing motion in the detection zone.| Test the motion sensor by
covering up the front curved lens with cardboard to block the view. If the
light turns off then something in the detection zone is triggering the sensor.
Relocate the unit or change the sensitivity (distance) of the sensor.
Coverage area of sensor is poor.
| Choose a suitable location for installing the product, away from trees, hot ventilator dusts, street lighting and traffic, which may interfere with its operation| Relocate the unit
The lights stay on continuously
| Ensure the unit is not positioned to detect unwanted objects
e.g. cars / people using roads / footpaths next to your property. Occasionally, wind may activate the sensor. (Sometimes passages between buildings etc. can cause
a “wind tunnel” effect.)
| Relocate the unit
The lights flash on and off
| Heat or light from the bulbs may be turning the sensor on and off| Relocate
the unit, away from the light source.
Sensor is sensing reflected light from the light fixture.| 1. Change position
of light head aim light away from the reflecting surfaces.
2. Relocate the unit to a different location where it no longer
causes reflected light.
Sensor will not operate at night
| The level of ambient light in the area may be too bright to allow
operation.| Relocate the unit
The level of ambient light in the area may be too bright to allow operation at
the current LUX setting.| During the hours of darkness, adjust the LUX control
slowly anticlockwise / clockwise (choose suitable one) until the lamp just
illuminates
Another light source is causing the unit to think it is daylight.| Turn off
surrounding lights and/or relocate the unit
Light does not switch off after set time has elapsed
| Time is set for too long.| Reduce time (TIME knob)
Continuous movement in the detection zone| Change detection zone / Relocate
the unit
Light being operated in the detection zone causing sensor to respond as a
result of change in temperature| Change detection zone / Relocate the unit
Safety
- These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference.
- Check the pack and make sure you have all of the parts listed.
- Remove all packaging, wrap etc from the product.
- Decide on the appropriate location for your product.
- CAUTION: IP44 is guaranteed when the product is properly installed and sealed.
- Always avoid the product to be located at corrosive environment.
- Always refer to the installation drawing for the orientation of the product.
- The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.
- Remove them from the battery compartment with a cloth if battery is leaked. Different types of batteries or new and used batteries are not to be mixed. The battery must be removed from the luminaire before it is scrapped. The battery is to be disposed of safely.
- The operating time depends on the charging performance in daytime. This would be affected by environment e.g. weather conditions and location.
- If use of the solar light is not required for a long period of time, it is recommended to switch the product to “OFF” to preserve the battery.
- We recommend to shelter this product during long winter periods (snow, rain) in order to preserve the product.
- It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.
Technical Data
Bulb Type:
| The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
---|---
Battery:
| 1 x 7.4 V 4400 mAh Li-ion battery. This battery is not replaceable.
Keep batteries out of the reach of children. In case of ingestion of a cell or a battery, the person involved should seek medical assistance promptly.
| ****
Conformity with all relevant EC Directive requirements.
| ****
Conformity with all relevant UK legislation requirements.
IP44| ****
Splashproof
| ****
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
| ****
Batteries must be recycled or throw away correctly.
xxWyy| xx-year; yy-week of the year
References
- Brico Depôt | Bricolaje, jardín, construcción y climatización
- Brico Depôt | Bricolage, construção, jardim e climatização
- Bricolage, jardinage et aménagement de la maison | Castorama
- B&Q | DIY Products at Everyday Low Prices | DIY at B&Q