Zambelis 20355 LED Wall Lamp Installation Guide
- October 30, 2023
- Zambelis
Table of Contents
20355 LED Wall Lamp
Installation Guide
Zambales 20355 LED Wall Lamp
Connecting the Terminal Block
Connect main supply (brown – Live. blue – Neutral) into terminal block
making sure all connections are tight.
WALL LIGHT
Please read instructions before commencing installation and retain for future reference.
SPECIFICATIONS
- Material: Metal + Bush
- Lamp type: LED . 3W , 3000K . 240Lm. Crib 80 | 1x E14. MAX 40W
- Ingress Protection: P20. Protection against entry of solid objects greater than 12mm in diameter.
INSTALLATION INSTRUCTIONS
Electrical products can cause death. injury. or damage to property.
Maintenance and installation should only be carried out by a professional
electrician.
- Ensure main supply is switched off.
- Insert the masonry plugs (1) into the mounting surface.
- Fit the mounting bracket (2) onto the mounting surface with self-tapping screws (3).
- Connect main supply wires to the terminal block (4) making sure all connections are tight.
- Fit the wall plate onto the mounting bracket with screws (5).
- Install E14 lamp firmly into the lamp holder (6).
- Reconnect power.
- Push On/Off switches.
WARNING
- Make sure that the products is installed properly before connecting to electricity.
- Do not cover the fitting.
- Not for outdoor use or in wet conditions.
- Do not exceed the maximum wattage ratting of the lamp.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>